Ik probeer via de onderstaande methode de MIUIv7 7.1.8 from MultiRom te flashen op mijn redmi note 3.
Ik zit nu bij punt 9, maar hoe lang duurt dat? Balk is inderdaad rood geeft DA 100% aan en een timer loopt, maar ik zie niks gebeuren. Doe ik iets fout?
Ik heb de flash tool als administrator gestart. Ik zit trouwens op windows 10.
How To Install:
1.Use SP Flash tool from the ZIP.
2.Go to Download tab.
3.Choose Download agent - DA_SWSEC.bin from SP Flash folder.
4.Choose Scatter - MT6795_Android_scatter.txt from images folder
5.And finally very important - UNCHECK preloader (if don't - you are going to brick RMN3) and UNCHECK Recovery (If U have Custom Recovery)
6.Select Download Only option.
7.Press Download button.
8.Turn off RMN3 and Press only vol down button on RMN3 and plug USB cable immediately. Keep button pressed.
9.See the red bar in SP Flash. Now you can leave the button.
10.See the yellow bar in SP Flash - that means flashing is started, wait until progress is 100% and window with green check mark appear. Flashing is done.
11.Now disconnect USB cable, close the SP Flash and turn on RMN3. First start may take up to 10 minutes.
[
Voor 5% gewijzigd door
Pinocan1980 op 20-02-2016 19:46
]