rapture schreef op zondag 26 april 2015 @ 12:37:
1%, 9%, 22%, 35%, 49%, 72%, 87%, 100%
Het laden blijft tergend traag met een Samsung 2A lader + bij de lader bijgeleverde 2A kabel. 10% per uur in eerste 3 uren, dan 15 à 20% per uur in 4de en 5de uur. Bijna 7 uren om van 0% tot 100% te geraken. Dus niet geschikt voor zwaar gebruik zonder reserve-accu's of eventjes snel bijladen in de auto, aan een battery pack,...
Een Redmi Note met ietsje grotere accu laadt in 1 uur van 0% tot 35% met een Samsung 1A lader. Dat is laden terwijl je wacht ipv overnight.
Dat heb ik ook, had zelfs een andere kabel gekocht op advies van een medegebruiker hier. Gevolg, brol, kan zelfs vanuit pc via de kabel niets copiëren op de SD. Met originele kabel, wel. Soit.
Ik heb wel het volgende gelezen, maar nog niet nagekeken. Ben mij telefoon thuis vergeten
/Quote:
ro.edi • a month ago
Jiayu has CRIPPLED / DISABLED the support for FastCharge !
MediaTek Pump Express™
By cutting typical recharge times by up to 45% !
Pump ExpressTM technology is available in two forms to suit different
battery capacities. Pump ExpressTM is designed for DC wall chargers
with an output of less than 10W (5V), while Pump ExpressTM Plus is for
chargers with an output of 15W or more (up to 12V).
So NOW that i am among the few that tell the TRUE, do notice this that
device companies do really CRIPPLE their devices !
So Jiayu by disabling the MediaTek Pump Express™
the battery will now charge not in 2 Hours, but in over 4 ours !
proof:
.field public static final MTK_PUMP_EXPRESS_SUPPORT:Z = false
More intel here:
http://roedi7.blogspot.ro/p/jiayu-2gb.html
/END Quote
En op XDA:
Originally Posted by Metrino
It's a Jiayu choice to preserve battery life.
the charging ratio follows, starting from a completely empty battery:
1.5 hours charging at 1A , the battery reaches 50% of charge
1.0 hours charging at 780 mA, the battery reaches 75%
1.5 hours to fullfill, using a decreasing current from 750 to 200 mA. This is the zone where batteries are more stressed, temperature raises and high temperatures are not a good thing for batteries.
--
That's an interesting info. I noticed that during the first hour of charging the charger became very hot, but at the last hour it was not hot at all, and took longer time to make 1 percent increment. It's all make sense now.