Het wordt weer eens tijd voor wat dik leesvoer in het Radeon Topic. Ik kwam eens wat artikeltjes tegen en vond daarin interessante gedachten.
Twee stukjes zijn daarbij van belang, waaruit hieronder een klein stukje volgt:
1.
http://www.digit-life.com/articles2/radeon/ati-r300.html#p2
”NVIDIA decided to take risks - being one of the first who got an access to the .13 process, the company is in a completely different situation. The new process must have all its imperfections corrected, the mass production can be time shifted and percentage of operable chips can be very low in the beginning. On the other hand, the process will be tweaked, NVIDIA will get more benefits regarding the prime cost and clock speed (originally higher-frequency architectures of NVIDIA + the finer technology give 400 against 300). So, time works for NVIDIA; that is probably why ATI was in such a hurry with the "paper" release and will possibly put on the market first cards yet before the DirectX 9.”
Dit artikel behandeld de R300. Kort gezegd vormt de gedachte van dit artikel, dat Ati belang heeft bij een snelle beschikbaarheid en vroege aandacht voor de R300. Alhoewel DX9 pas in de herfst komt en daarmee het volledige potentieel van de R300 pas naar buiten komt, moet Ati zijn kaart stevig in de markt hebben als no. 1 voordat Nvidia met hun NV30 komen. In principe heeft Nvidia ook de tijd wat DX9 betreft.
Ati gebruikt beproefde .15 techniek voor hun chips en Nvidia begint met de leercurve van een .13 micron chip. Ati heeft dus op dit moment het voordeel van een supersnelle kaart op de markt en de snelheidstroon, maar Nvidia heeft in principe op de lange duur het voordeel, mits het .13 procédé goed uit gaat pakken en de NV30 niet al te lang op zich laat wachten.
2.
http://www6.tomshardware....3/020802/siggraph-03.html
”Cg may very well end up being a red herring. If nothing else, it acted as a catalyst for Nvidia to plant stories about NV3x. At least two OEMs and one ISV at Siggraph told me that NV3x has not taped out, which indicates that it is at least six months away from realization. Having said that, Nvidia is a champion of going from tape out of a part to having actual sample boards ready for testing. They took 60 days with the GeForce2, but that was a die shrink. The NV3x is a major architectural change as well as a change to a new manufacturing process (0.13 micron), so it's going to take a miracle to short cut the process.
Since then, Nvidia's competition has been circulating this tidbit from the company's conference call with financial analysts this week:
"It should be available for holiday season." J. Huang
"Has the NV30 taped out yet?" Analyst
"Historically Nvidia has done a good job with tapeouts etc... We're in the process of wrapping it up." J. Huang
"So it has not been taped out yet?" Analyst
"We're in the process of wrapping it up so the answer is not." J. Huang
An analyst source had this to offer in response to our inquiries:
Our contacts indicate that TSMC's average yields at 0.13 micron have been just 15%. So even if the part was ready for volume production later this year, those poor yields are likely to impact the number of parts meeting spec that you can get to market.
NVIDIA took a gamble by acting as one of the guinea pigs for TSMC, and it looks like this gamble isn't working out, right now. ATI's strategy of staying with the proven 0.15-micron process will probably pay dividends in the near-term.
Lastly, NVIDIA has experienced a tough time with its board partners with regard to its NV17 (GeForce4MX). A number of vendors have experienced tons of trouble buliding boards based on the chip and Nvidia's reference design.
The upshot of all this is that Nvidia is on the defensive, and we haven't seen that since the Edge3D days. Having managed to alienate Intel, Microsoft, Tier One OEMs, and many others in the graphics industry, look for the sharks to start smelling blood in the water.
Nvidia will probably come out okay at the other end, but this is a major transition point for the company. Going from being top dog to not killed S3 and 3dfx, mostly because the suits at those companies were to busy paying attention to stock prices and options. Let's hope that's not going to happen here.”
Hier een wat minder rooskleurig plaatje, maar dezelfde zaken zijn aanwezig. Ati met het doorgaan met de beproefde .15 wijze en latere overschakeling op .13 (hetgeen gepland is voor het einde van het jaar) en Nvidia die meteen met .13 wil beginnen. Als de vetgedrukte bewoordingen in de buurt van de waarheid liggen, heeft Nvidia op dit moment een klein probleempje wat betreft:
-PR (in ieder geval);
-tijdsverloop;
-op tijd genoeg yield halen voor massaproductie.
Als Ati op hetzelfde moment als Nvidia met .13 kan komen, heeft Nvidia een kleine achterstand. De achterstand van Nvidia bestaat uit het niet hebben kunnen plukken van de voordelen van .15 voor de NV30 deze maanden en in relatie daarmee pas veel later met een DX9 kaart komen, wat PR technisch niet handig is. Het is te hopen voor Nvidia dat DX9 release ongeveer samenvalt met de release van de NV30, zodat de werkelijke bruikbaarheid van de kaarten vanaf dag een naast elkaar valt. Als daar ook nog een gat tussenzit, heeft Ati een grote sprong gemaakt, helemaal als zij op tijd .13 beheersen.
Nvidia neemt dus een gok, een vrij grote gok. Geen probleem, maar van Nvidia hoeven we dus blijkbaar de komende maanden niet veel te verwachten.
Overigens mooi om te zien waarover we praten, is de volgende link. Een verbijsterende blik in de huidige hardwaresamenstelling in de markt. R9700 hypes zijn levend, maar slecht weinig mensen hebben een topkaart in hun systeem zitten. Daarom lijkt mij het PR gehalte van de snelste kaart hebben dan ook een grote factor voor de budgetmarkt van een fabrikant. Nvidia het snelste, dan ook een MX in je budgetsysteem of zo. Voor ons tweakers wat minder begrijpelijk, maar goed.
http://valve.speakeasy.net/