Verwijderd schreef op donderdag 19 februari 2009 @ 16:02:
[...]
Het tooltje EEECTL gebruik ik ook. Die maakt het lawaai inderdaad aanzienlijk minder. Ik zal ASUS maar eens gaan contacten. Hoe doe je dat overklokken trouwens met EEECTL. Als ik Stock, medium of full kies dan krijg ik een wit scherm en gebeurd er verder niets meer. Ik moet dan mijn EEE uitzetten. Daarna merk ik niet echt verschil. Het enige wat veranderd is na de eerste keer proberen is dat er onder de optie Full bij custom de waarde is veranderd in 51,166... dit was eerst iets van 45..??
Is er niet ergens een duidelijk uitleg hoe deze tool werkt? Ik weet van het bestaan van die INI file maar daar wordt ik ook niet echt wijzer van.
; This file contains modified eeectl settings for the ASUS Eee PC 901 model.
; Please note that the default settings are adjusted, sane and sufficient for most users.
; When making changes you should clearly understand what you are doing, otherwise you may
; damage both software and hardware.
; If you want to start eeectl with a specific configuration file
; (or to apply this file to the already running eeectl instance)
; you can use "-c" parameter like this:
; eeectl.exe -c "C:\Program Files\eeectl_new_config.ini"
; If you want eeectl to perform some actions after loading
; (or to perform some actions on the already running eeectl instance)
; you may use "-e" parameter like this:
; eeectl.exe -e Speed.Full
;
; eeectl has a modular structure, each module has a set of resources.
; Most notable
;
; Modules:
; Core -- eeectl core interface.
; Speed -- FSB speed, PCIE speed and CPU voltage control.
; Temp -- Temperature monitor.
; Fan -- Fan control.
; Backlight -- Backlight brightness control.
;
; Methods:
; Core._quit -- Exit app.
; Core.Alpha -- Load ini file "Alpha".
; Speed._up -- Switch to the nearest upper speed profile.
; Speed._down -- Switcn to the nearest lower speed profile.
; Speed.Alpha -- Switch to the "Alpha" speed profile.
; Fan._native -- Return fan control to the embedded controller.
; Fan._auto -- Enable automatic mode.
; Fan.Numeric -- Set fan speed to "Numeric".
; Backlight._up -- Switch to the nearest upper backlight profile.
; Backlight._down -- Switch to the nearest lower backlight profile.
; Backlight.Alpha -- Switch to the "Alpha" backlight profile.
;
; Icons:
; Core. -- Blank icon
; Speed.FSB -- FSB clock frequency multiplied by Speed.FSBIconMul
; Speed.PCI -- PCI clock frequency
; Fan. -- Current fan speed
; Temp.C -- CPU temperature in celsius
; Temp.F -- CPU temperature in fahrenheit
; Backlight. -- Current backlight brightness intensity.
;
[Settings]
;
; List of modules allowed to save their state.
; Core.Save = Speed; Backlight; Fan;
Core.Save = Backlight; Fan;
;
; List of modules to add to system menu.
; List consists of blocks "Name,Mode".
; See the table above for the list of available modules.
; Mode can be embed(module menu items add right to the menu) or popup(module has its own submenu), default is embed.
Core.Menu = Speed,embed; Fan,popup; Backlight,popup; Core;
;
; Hotkeys list
; List consists of blocks "Modifier+Key,Method"
; Modifier can be any combination of a(lt), c(ontrol), s(hift) and w(indows)
; Key can be key name (like "home", "del", "g" or "8") or key code (for example "%1B" for the escape key)
; See the table above for the list of the most useful methods.
Core.Keys = aw+esc,Core._quit; aw+down,Speed._down; aw+up,Speed._up; aw+f3,Backlight._down; aw+f4,Backlight._up; aw+0,Fan._auto; aw+3,Fan.30; aw+5,Fan.50; aw+7,Fan.70;
;Core.Keys =
;
; List of icons to show in the tray.
; List consists of blocks "icon,color".
; See the table above for the list of available icons.
; Color is 24-bit hex value in BGR format, FFFF00 by default.
Core.Icon = Speed.FSB; Temp.C,00FFFF;
;
; Pause between icon changes, msec.
; Set to 0 to disable automatic icon changing.
Core.IconDelay = 4000
;
; Speed profiles list.
; List consists of blocks "FSB,PCIE,Voltage,Name".
; ========== The following statement is incorrect for the Eee 901 ==========
; FSB is the real FSB frequency (70MHz stock, 100MHz max), not the rated one which is
; this value multiplied by four, or the CPU one, which is this value multiplied by nine.
; ==========
; PCIE is PCI Express bus clock frequency.
; Voltage is CPU voltage flag, 0 for Low, 1 for Normal.
; This flag is ignored for all(and even named) intermediate values.
; Name is just what to show in the menu("Suspend" is the special profile to set before entering sleep mode).
; You may omit Name in case you want to hide profile from the menu, however it will still be used as an
; intermediate value.
;
; Note that changing the frequency includes a step-by-step transfer through all intermediate
; values, i.e. if you change the frequency from 70 to 100 MHz and settings contain also 80
; and 95MHz, first the frequency will be changed to 80, then to 95 and only then to 100MHz.
; When comparing, FSB speeds are taken in account first and if they are equal -- PCIE speeds get comapared too.
;
; Super Hybrid Engine values - Super Performance Mode = 50,176,1 / High Performance Mode = 48,166,1 / Power Saving Mode=36,166,0
;
Speed.Profiles = 30,166,0,1 GHz - PowerSave; 36,166,0,1.2GHz - Low; 44,166; 48,166,1,1.6GHz - Normal; 48,176; 50,176,1,1.7GHz - Medium; 52,176; 54,176,1,1.8GHz - High; 57,186,1,1.9GHz - Turbo; 60,196,1,2 GHz - Max
; Pause between steps in described process, msec.
Speed.StepDelay = 800
; Multiplier for the FSB icon. You may set it to 33 to see the *approximate* CPU speed in the tray
; instead of the FSB one. It should be 33.333333..., but eeectl only supports integers.

Speed.FSBIconMul = 33
;
; Fan profiles list.
; List consists of blocks "Speed,C_Temp_On,C_Temp_Off".
; Speed is the fan speed (0-100).
; C_Temp_On(used in Automatic mode) is temperature(Celsius) when this profile should be activated.
; C_Temp_Off(used in Automatic mode) is temperature(Celsius) when this profile should be deactivated.
; You may set both temp fileds to 0(or just omit them) if you don't want them to be used in Automatic mode.
; Fan.Profiles = 0,30,53; 25,58,54; 30,62,59; 35,64,62; 40,70,64; 50,75,65; 60; 70; 80; 90; 100,90,75;
; Fan.Profiles = 0,10,50; 5,51,60; 15,61,70; 30,71,80; 50,81,85; 75,86,90; 100,91,100;
Fan.Profiles = 0,10,40; 5,41,50; 15,51,60; 30,61,75; 50,76,85; 75,86,90; 100,91,100;
;
; Backlight profiles list.
; List consists of blocks "Name,Value".
; Name is just what to show in the menu.
; Value is the backlight brightness intensity(0-100).
Backlight.Profiles = Lowest,15; Low,30; Normal,61; Bright,80; Ultra,100;
[States]
Fan.Mode=0
Fan.Speed=
Backlight.Level=61
Plak bovenstaande tekst in je eeectl.ini als het goed is krijg je dan een hele hoop snelheidsopties die je kungt gebruiken. Het werkt in ieder geval op de 901. Moet alleen wel de juiste bios hebben, de versie voor 1808 werkte bij mij.