Beelden die even schokken (omdat er dus frame missen; 60Hz is niet deelbaar door 24/25). Bij genoeg beelden zul je er niet veel van zien (overigens heeft ook niet iedereen er last van); maar bij panshots (horizontaal draaien met de camera) of van die lopende teksten onderin beeld of rollende aftiteling kun je het wel duidelijk zien.
Deze reactie van
reactie legt het ook aardig goed uit:
Its simple the Ouya or android its locked to 60Hz so no 24p, 25p, 30p, 50Hz (PAL)
If you play anything but NTSC content any trained videophile eye will see the jitter especially on screen pans, even my gf noticed after running the Ouya for a week or two she could instantly see it when switching to the bluray player or RPi which handles all these modes that my high end tv also supports. Bit of a bummer no be able to use the features. Luckily next thing they say they are working on is digital out, which is also buggy for me and a lot of other people (I have to reconnect plug or switch source after movie start). And CEC!
The big bummer for XBMC on Ouya for me is still the locked 60Hz throwing away and adding pictures or sound, or speeding the video up to make things "seem" fluid. It does jitter if its not 60Hz if you can not see it please pray that you never start noticing it lol. Its like those shadows on old LCD screens when soccer is played. Some people where very annoyed by the "shadowing" other couldn't even see it at all, it doesn't mean it isn't there though. =) video quality is not the same either. Try some test discs against other devices.
60Hz is super perfect for a console or a game though.
Of van Wikipedia:
The “2:3 pulldown” telecine process creates a slight error in the video signal compared to the original film frames that can be seen in the above image. This is one reason why films viewed on typical NTSC home equipment may not appear as smooth as when viewed in a cinema and PAL home equipments. The phenomenon is particularly apparent during slow, steady camera movements which appear slightly jerky when telecined. This process is commonly referred to as telecine judder. Reversing the 2:3 pulldown telecine is discussed below.
PAL material in which 2:2:2:2:2:2:2:2:2:2:2:3 pulldown has been applied, suffers from a similar lack of smoothness, though this effect is not usually called “telecine judder”. Effectively, every 12:th film frame is displayed for the duration of three PAL fields (60 milliseconds), whereas the other 11 frames are each displayed for the duration of two PAL fields (40 milliseconds). This causes a slight “hiccup” in the video about twice a second. It is increasingly being referred to as Euro pulldown as it largely affects European territories.
Dat 60Hz. ligt niet per definitie aan Android maar aan de onderliggende firmware die Ouya gebruikt. Tenzij Ouya dit gaat verhelpen (0% kans) of een stel slimme tweakers/hacker (ook praktisch uitgesloten gok ik) wordt dit dus ook niet beter.
Iemand hier youtube movies van? Dit omdat ik veel mensen erg enthousast zie zijn over de OUYA icm XBMC, waarom hebben zij hier geen last van?
Kan zo geen Youtube filmpjes hierover vinden, maar dat zij geen last van hebben is:
1; zoals ik al zei; niet iedereen merkt het en het is niet altijd te zien; het is duidelijk bij langzame shots maar bij drukke actiebeelden zul je het niet zo snel zien.
2; in de VS gebruiken ze NTSC standaard (i.t.t. PAL hier) en die heeft andere refreshrate (30fps, 60fps e.d.). 60Hz van de Ouya is dus wel deelbaar door die refreshrates en dus heb je er dan geen last van.
Erg jammer, want ik gebruik de Ouya nog steeds voor XBMC en op dat 60Hz. gedoe na is hij daar perfect voor. Niet zo duur en snel in gebruik (snelheid in menu, opstarten van films e.d. gaat allemaal veel sneller dan met de Raspberry Pi). Die laatste heeft overigens geen enkele probleem met verschillende refreshrates van films/series; die speelt 24p, 25p e.d. allemaal probleemloos af.
[
Voor 24% gewijzigd door
Piet91 op 29-01-2014 13:31
]