Van belang voor Ubuntu en overige linux distro users:
https://bugs.launchpad.ne...e/acpi-support/+bug/59695
Ik heb zelf net een HP 6720s aangeschaft en Ubuntu geprobeerd, na wat onderzoek bleek dat deze laptop (of om precies te zijn, de HDD gebruikt in deze laptop) last ondervind van deze "bug".
In het kort stelt een HDD fabrikant per schijf in hoe vaak deze door een load cycle moet gaan, dit met betrekking tot power save features en veiligheid voor je HDD tijdens bumpy laptop gebruik. Fabrikanten stellen soms, voor zover ik uit wat links heb begrepen, idiote waarden in waardoor je HDD in een periode van < 1 jaar door zijn te verwachten levensduur heen gaat.
Waar een aantal operating systems, zoals Windows en Mac OS deze waardes naar eigen inzien overschrijven doet Ubuntu (en mogelijk andere distro's) dit niet!
Gevolg: Een hoog aantal load cycles per tijd en een potentieel verlaagde levensduur van je HDD!
Een quote van de link:
Following is a summary of the issue:
It is confirmed that some systems are seeing an unusually high number of load/unload cycles on their hard disks, as evidenced by smartctl.
It was originally surmised that this was related to laptop-mode being enabled, but this especially affects systems where laptop-mode is disabled. In fact, aggressive APM is not a bad idea while a system is not on AC, as that system is much more likely to encounter a physical impact.
This is due to disk APM settings that let the heads park or disk spin down after an idle period that is shorter than the regular disk access patterns of the OS.
Then, the heads are only parked for a very short period of time and almost imediately loaded again. Making impact protection much ineffective and wearing out the drive.
It can happen when the disk asumes aggressive APM settings (like many laptop disks) and the OS does not take care to set the APM settings accordingly to its current disk access pattern.
This problem has been confirmed in Ubuntu as well as in other distributions and on MacOS X and Windows.
Symptoms of this bug are:
* Frequent HD clicks -- more than one per 3 minutes while idle, louder than the typical access sounds. Often more than twice per minute. On some disks, the click is very quiet
* Rapidly Increasing Load_Cycle_Count as displayed in the final number in "sudo smartctl -a /dev/hda | grep Load_Cycle_Count" (where /dev/hda is replaced with your own hard disk device)
* Early hard disk failure never stay parked, due to very frequent disk activity. Thus this cycle occurs often, thus wearing out the drive, and any comparative benefit is negligible (whereas, if the-- some disks are cut down to less than a year of actual uptime.
The problem is only present due to the existence of *all four* of the following factors:
* Hardware is set (default or otherwise) to aggressive power management, causing heads to park. (default behaviour of many drives and often the only user available type of power management)
* Disk is touched often, causing heads to unpark. (default behaviour of many distributions)
* Drives are spec'd to a limited number of these cycles. (600,000 is the most common, although some may be spec'd higher or lower).
* The OS not setting disk APM variables according to current disk access pattern.
Reasonable Limits / Criteria for a fix:
* There should be fewer than ~15 load cycles per hour, except during heavy usage while on battery.
* This provides a life expectancy of over four years, which is reasonable for a hard disk.
Voor zover ik begrijp is dit niet zozeer een bug, maar een keuze van de Ubuntu developers om zich niet te bemoeien met de agressieve power save features die HDD fabrikanten hun HDDs mee geven, waar andere operating systems dit wel doen.
Even ter informatie dus
*edit*
Ik ondervond ongeveer 1 cycle per 10 seconden onder Ubuntu, dat vertaalt naar 3.153.600 load cycles per jaar mits de laptop 100% van de tijd aan zou staan. Zou hij slechts 1/4 van de tijd aan staan dan zouden het 788.400 load cycles per jaar zijn, dat is 180.000 boven de spec van de HDD
Dit is terwijl de laptop aan de stroom hangt zonder dat ik extreem rare dingen aan het doen ben. In feite kijk ik er gewoon naar en ben ik de load cycles aan het refreshen om te kunnen tellen.
Het lijkt voornamelijk te gebeuren als ik de adapter disconnect en even later weer reconnect.
*edit 2*
Zoals te zien in dit document:
http://www.seagate.com/do...sc/ds_momentus_5400_4.pdf
Geeft de fabrikant (in dit geval seagate - model: ST9120817AS) aan dat het >600.000 cycles kan doen bij een "limited" warranty van 5 jaar. Op basis van de load cycle count die Ubuntu me gaf gaat dat dus nooit lukken
Onder windos Vista heb ik trouwens geen problemen
Unofficial ugly fix:
http://ubuntuforums.org/showthread.php?p=5031046
Referentie:
http://ubuntudemon.wordpr...ressive-power-management/
*edit 3*
We blijven bezig. Ondertussen ben ik te weten gekomen dat de voorgestelde fix de algemene aanpak is voor dit probleem. Verder heeft ook mac osx, fedora en een aantal andere distro's hier last van (zie deze link
http://chrislaz.net/blog/?p=151 voor fedora, als voorbeel)
Nogmaals, dit is niet specifiek een ubuntu bug.
[
Voor 14% gewijzigd door
Steef op 30-07-2008 23:00
]