Hallo,
Ik heb me ook een KS-20 gekocht bij BelCompany.
Ik heb er de nieuwe ROM opgebrand en ik heb de moeite gedaan om een stappenplan te maken.
Wel nog in het Engels omdat ik van plan was die eerst op
http://forum.xda-developers.com te plaatsen.
Dus als iemand wil vertalen, ga je gang:
Voor je begint moet je best eerst je IMEI adres van je phone noteren.
De genoemende bestanden kan je oa vinden op
http://forum.xda-developers.com
Hoe upgraden naar WM6.1 Kiss Rom English version (Stappenplan)
Op KS20
-hardreset device
-install new windiag.dll in windows dir (install cab + overwrite dll)
-enter this code to dialpad: 2676625720#
-engeneering menu will show.
-press: Port Setting → 1. Diag Setting → 1. USB Set for Diag → “OK” → “Back”. 2. USB Switching → “LG Composite -DUN, DIAG”.
-press Done and softreset KS20.
Op PC
-copy Manila 2D files to root of empty microsd (root contains folder Cabs and file SDConfig.txt: these will autoinstall Manila 2D after ROM Flash)
-unzip all files from KISS rom on some PC folder. move files from "unbranded" dir one level higher, so there are 10 .mbn and 1 .bin file (if your device is unbranded)
-install LGCoronaUSBDriver.exe
-install LGDMP (Euro version)
-insert microsd into KS20
-connect device at usb port of PC (check that plug and play detects device correctly)
-run LGDMP at PC
-select Tools/NV Backup in menu as a test.
-click connect and select device.
-device should be know as KS20 and IMEI should show correctly. This is very important for NV Backup! This creates local backup of IMEI. If this fails, don't continue!
-note that Bluetooth ID will not be show correctly, but this is no problem. Now creat local NV Backup (takes about a minute).
-now we will start actual rom flashing. click at "Select port". Device should be autodetected as KS20 and IMEI should show and state is "Enable". This is very important for NV Backup!
-if device is not correctly detected, you should again try to re-install windiag.dll on KS20 until device is auto-detected. Ifnot do not continue.
-if auto-detection is ok, select device. dialog will appear, check if state is "Enable" otherwise there is something wrong with your connection. Hit connect.
-dialog will appear where you can select folder with KISS rom (11 parts should be checked)
-select "Reset Database & Contents"
-turn of screen savers and powers savings on your pc and close all other programs.
-press Start (point of no return!)
-first NV Backup will be done! This is important, because this contains IMEI data of your phone and it will be restored after rom flashing.
-phone then will go to emergency mode and start download rom parts from pc to your phone
-wait until device is correctly flashed: about 15 minutes.
-KS20 will reboot twice.
-after 2nd reboot you can config your WM6.1 (set timezone etc.)
-after this Manila will auto install (this may take a very long time maybe 20 minutes or so). If it seems to freeze, do not stop it. Be patient!
-after Manila install device will reboot.
-you can now completely customize your WM6.1 (config Wifi, Bluetooth, mail accounts etc.)
-:-)
Extra:
install Manila 2D Theme Black_TWolf.m2dct theme under Program Files\M2DC\Themes and select in M2DC