Hier is hij dan:
http://www.megaupload.com/nl/?d=SGFEEL6L
Let wel, imgburn lust de iso's niet dus ik heb nero gebruikt.
En het werkt, ik heb net de hack gedaan en ik kon al mijn R1 DVD's afspelen!
Ook weer geupdate naar 4.0 via internet en de speler is nog steeds regiovrij en de RCE hack werkt ook (voor zover ik kan nagaan, ik heb geen RCE discs maar de procedure werkt).
Is wel even zweten als je tijdens het updateproces de stekker er uit moet halen maar het werkt echt.
PS: Brand de iso's op 8x ofzo, voor de zekerheid.
De instructies voor de volledigheid:
1. Insert the CD with firmware called EP30-dirty1
2. Answer Yes to update
3. The display will show VER UP for awhile, then count until STEP 2/4 before it stops with 10004050 showing on the display. The TV will still show “Updating. Do not turn off.”
4. Let it stay like that for 10 minutes
5. Unplug the power cord, wait 10 seconds and plug it in again
6. Turn the player on with the remote
7. There will not be anything shown on the TV
8. It will show WELCOME in the display for awhile, then it will show VER UP
9. Press Right Arrow (the button to the right of OK) once
10. Press OK once
11. The disc will eject
12. Insert the CD with firmware called EP30-dirty2
13. After awhile it will show VER UP in the display, then you press OK once
14. It will still show VER UP in the display for awhile, then it will count from STEP 1/4 until STEP 4/4
15. STEP 4/4 will take 15 - 20 minutes. Just wait and let it run it's course.
16. The disc will eject and the player will turn itself off
17. Remove the disc and turn the player on with the remote
18. It will show WELCOME for awhile and then a small update will run, only STEP 1/1 and the player will turn itself off again.
19. Turn the player on with the remote and you have a regionfree EP30
You can now update to version 4.0 and still keep the regionfree setting.
en:
To make your EP30 or A30 (incl. PAL capability) region free:
1) EP30-dirty1
2) EP30-dirty2
3) Update your now region free player with the EP30 version 4.0.
To crossflash your EP30 or A30 (incl. PAL capability) into region free EP35-mode:
1) EP30-dirty1
2) EP35-dirty2
3) Update your now region free player with the EP35 version 4.0.
To make your A35 into PAL capable region free EP35:
1) EP35-dirty1
2) EP35-dirty2
3) Update your now region free player with the EP35 version 4.0.
To revert your EP30 or A30 from EP35-mode to EP30-mode:
1) EP35-dirty1
2) EP30-dirty2
3) Update your reverted player with the EP30 version 4.0.
RCE:RCE HACK.
1) Turn on player
2) Open tray, put disc in tray but don´t close
3) Push T.search on remote
4) Push 1, 3, 9 and "Region number" (e.g. 1 for US discs)
5) Push T. search on remote.
You will see TEST on your player
6) Press PLAY on the remote
When player is turned off, this setting is cleared.
[
Voor 128% gewijzigd door
mace op 08-12-2008 00:30
]