Hoi, ik krijg het niet voorelkaar om wm5 erop te krijgen.
Ik heb al geprobeerd met typhoonNFBtool 0.3 (nadat ik erachter kwam een "dll" nodig te hebben) de SPL terug te flashen van 2.05.x naar 1.x maar dat lukt niet.
Eerst had ik de dll niet, toen moest ik "rapi policy reset" ofzo hebben, dat gedraaid.
Toen kreeg ik wel de "flash functie" maar crashde nfbtool bij de "test run".
Ik heb voor zover ik weet alle nodige tools om hem te flashen naar wm5 maar om de 1 of andere reden wil hij maar niet.
Ik heb het eerst voor een maat van me gedaan die dus de oude spl 1.x had en er was geen probleem gelijk werken en draaide als een trijn.
hier kleine greep uit de "howto"
ROM:
1) Extract all files
2) Check your bootloader version shown in tri-color mode by 1) turning off the phone 2) holding down the camera button and while holding it down 3) inserting the usb cable and checking SPL version. If this is < 2.x continue, if it's above 2.x you need to flash down to 1.x with TyphoonNbfTools's "Emergency Flash" option (Google for more information, link here:
http://www.spv-developers.com/forum/showthread.php?t=263)
3) Run Patched_RUU.exe from the Bootloader-1.01.0109 folder and follow the instructions to install the UI bootloader
4) Install Activesync 4.0
5) Terminate the wcescomm.exe process
6) Put your phone into the tri-color boot mode as explained above and press 0 when prompted on the white screen to place the phone in UI mode
7) Take the ROM and place it in your root directory (C:\) and rename it something easy to type (ROM.bin)

Start mtty1.42.exe from the ROM folder and select USB as the connection
9) If a CMD> prompt does not appear hit enter and it will
10) Type l <root>\<filename>.bin (so if you renamed it ROM.bin and placed it in C:\ then type l C:\ROM.bin, where l is a lowercase "L")
11) Mtty will say "Start flashing new image!" and will take a minute to flash. Leave it alone to do this until it informs you that it's finished flashing.
mtty komt met een error en doet niets mogelijk omdat ik niet in de "dev UI" kom.
als ik dus de bootloader flash doet loopt hij die wel helemaal af, op telefoon krijg ik netjes te zien "100%" hij restart maar spl blijft 2.05.x
Als iemand me kan vertellen waarom nfbtool het vertikt hoor ik dat graag.
Asus Z390 Maximus IX Hero, Intel 9900K, RTX3080, 64GB DDR4 3000, 2TB NVME, Samsung 850Evo 1TB, 4 x 14TB Toshiba, Be Quiet SB 801, Samsung 34"