Dit topic is afgesplitst van CD bootable maken lukt niet*
Het is @#$@#$ nog niet gelukt. En ik zag toevallig op dat laptop support forum nog iemand die hetzelfde probleem had. Alleen die uitleg vind ik niet echt duidelijk.
Zijn vraag was:
"Gisteren heb ik geprobeerd mijn laptop te re-imagen op TNW, en dat leek gelukt. De computer geeft echter nu als Windows wordt opgestart aan dat ik een setup moet uitvoeren, waarbij ik ook een Product Key moet opgeven. Als ik de product key die onderop mijn laptop staat gebruik, doet hij het echter niet (verschil tussen XP Pro en Home denk ik?). Hoe moet ik dit oplossen?"
Antwoord:
"If you are asked for a Windows Product Key, you have disconnected the network cable too soon. The key at the bottom is indeed not valid for XP Professional. You will have to re-image your laptop to fix this.
Make sure that the network boot option is set as first option in the BIOS (which is the default setting when you got the laptop). Also take care to exactly follow every step on the tank station manual, skipping any of them may cause errors."
Ik kon bij de boot order nergens iets over Network boot vinden, dus ik had gewoon de internetkabel erin gedaan. Toen kreeg ik het volgende:
Client MAC (heleboel getallen) GUID: (getallen)
DHCP .. met zo'n slashje dat ronddraait erachter
Na een tijdje gaat ie verder en start de setup weer, maar hij zegt nog steeds dat die code fout is. Dit had diegene op het forum ook en kreeg het volgende antwoord:
"This message indicates that the laptop receives an option to boot using the network. You can either configure the hardware/software that arranges your internet-account to stop sending this image, or you can simply wait until Windows is starting to plug in your network cable. If you are up to it, you can also change the order of boot devices in your BIOS, but if you do not set the Network boot option back to the first position before you re-image, you might end up with a cripled image (not authenticated).
In short, either
- change your internet connection (most difficult I guess),
- plug in your network cable later, or
- change the boot order in the BIOS"
Hier kan ik ook niet echt wijs uit worden. Heeft iemand nog suggesties/oplossingen?
Het is @#$@#$ nog niet gelukt. En ik zag toevallig op dat laptop support forum nog iemand die hetzelfde probleem had. Alleen die uitleg vind ik niet echt duidelijk.
Zijn vraag was:
"Gisteren heb ik geprobeerd mijn laptop te re-imagen op TNW, en dat leek gelukt. De computer geeft echter nu als Windows wordt opgestart aan dat ik een setup moet uitvoeren, waarbij ik ook een Product Key moet opgeven. Als ik de product key die onderop mijn laptop staat gebruik, doet hij het echter niet (verschil tussen XP Pro en Home denk ik?). Hoe moet ik dit oplossen?"
Antwoord:
"If you are asked for a Windows Product Key, you have disconnected the network cable too soon. The key at the bottom is indeed not valid for XP Professional. You will have to re-image your laptop to fix this.
Make sure that the network boot option is set as first option in the BIOS (which is the default setting when you got the laptop). Also take care to exactly follow every step on the tank station manual, skipping any of them may cause errors."
Ik kon bij de boot order nergens iets over Network boot vinden, dus ik had gewoon de internetkabel erin gedaan. Toen kreeg ik het volgende:
Client MAC (heleboel getallen) GUID: (getallen)
DHCP .. met zo'n slashje dat ronddraait erachter
Na een tijdje gaat ie verder en start de setup weer, maar hij zegt nog steeds dat die code fout is. Dit had diegene op het forum ook en kreeg het volgende antwoord:
"This message indicates that the laptop receives an option to boot using the network. You can either configure the hardware/software that arranges your internet-account to stop sending this image, or you can simply wait until Windows is starting to plug in your network cable. If you are up to it, you can also change the order of boot devices in your BIOS, but if you do not set the Network boot option back to the first position before you re-image, you might end up with a cripled image (not authenticated).
In short, either
- change your internet connection (most difficult I guess),
- plug in your network cable later, or
- change the boot order in the BIOS"
Hier kan ik ook niet echt wijs uit worden. Heeft iemand nog suggesties/oplossingen?
[ Voor 12% gewijzigd door Spider.007 op 12-08-2008 10:17 ]