Hallo
Ik heb een probleem. ik heb een net een router van iemand gekregen.
maar nu kan ik er niet echt opkomen.
ik denk dat het een moerlijke vraagt is die ik ga stellen maar ik hoop dat iemand mij kan helpen.
ik laat ff zien wat ik zie als ik de router opstart. :
System Bootstrap, Version 5.2(8a), RELEASE SOFTWARE
Copyright (c) 1986-1995 by cisco Systems
2500 processor with 16384 Kbytes of main memory
No usable interfaces
System Bootstrap, Version 5.2(8a), RELEASE SOFTWARE
Copyright (c) 1986-1995 by cisco Systems
2500 processor with 16384 Kbytes of main memory
Restricted Rights Legend
Use, duplication, or disclosure by the Government is
subject to restrictions as set forth in subparagraph
(c) of the Commercial Computer Software - Restricted
Rights clause at FAR sec. 52.227-19 and subparagraph
(c) (1) (ii) of the Rights in Technical Data and Computer
Software clause at DFARS sec. 252.227-7013.
cisco Systems, Inc.
170 West Tasman Drive
San Jose, California 95134-1706
Cisco Internetwork Operating System Software
IOS (tm) 3000 Bootstrap Software (IGS-RXBOOT), Version 10.2(8a), RELEASE SOFTWARE (fc1)
Copyright (c) 1986-1995 by cisco Systems, Inc.
Compiled Tue 24-Oct-95 15:46 by mkamson
Image text-base: 0x01020000, data-base: 0x00001000
cisco 2500 (68030) processor (revision D) with 16380K/2048K bytes of memory.
Processor board serial number 02986054 with hardware revision 00000000
X.25 software, Version 2.0, NET2, BFE and GOSIP compliant.
ISDN software, Version 1.0.
1 Ethernet/IEEE 802.3 interface.
2 Serial network interfaces.
1 ISDN Basic Rate interface.
32K bytes of non-volatile configuration memory.
16384K bytes of processor board System flash (Read/Write)
Loading network-confg ... [timed out]
Loading 2503b-confg ... [timed out]
Press RETURN to get started!
2503B(boot)>
Hij start dus niet in de gewone IOS, ik ga er dus van uit dat hij niet in de routers flash geheugen zit.
ik denk dat hij probeert contact te maken met een remote computer waar de IOS op staat van de voringe eigenaar. Right?
nu heb ik die IOS wel op de computer staan maar hoe ga ik die op de router zetten.
Als ik het mis heb graag laat het me even weten.
Uit eindelijk is mijn vraag hoe ga ik die IOS op die router krijgen met een TFTP progamma.
Kan niet via Serial.
Kan niet via de ISDN poort.
Kan niet via de AUX poort.
Hoe dan ???
ik hoop dat iemand mij kan helpen.
als je vragen hebt let me know
Ik heb een probleem. ik heb een net een router van iemand gekregen.
maar nu kan ik er niet echt opkomen.
ik denk dat het een moerlijke vraagt is die ik ga stellen maar ik hoop dat iemand mij kan helpen.
ik laat ff zien wat ik zie als ik de router opstart. :
System Bootstrap, Version 5.2(8a), RELEASE SOFTWARE
Copyright (c) 1986-1995 by cisco Systems
2500 processor with 16384 Kbytes of main memory
No usable interfaces
System Bootstrap, Version 5.2(8a), RELEASE SOFTWARE
Copyright (c) 1986-1995 by cisco Systems
2500 processor with 16384 Kbytes of main memory
Restricted Rights Legend
Use, duplication, or disclosure by the Government is
subject to restrictions as set forth in subparagraph
(c) of the Commercial Computer Software - Restricted
Rights clause at FAR sec. 52.227-19 and subparagraph
(c) (1) (ii) of the Rights in Technical Data and Computer
Software clause at DFARS sec. 252.227-7013.
cisco Systems, Inc.
170 West Tasman Drive
San Jose, California 95134-1706
Cisco Internetwork Operating System Software
IOS (tm) 3000 Bootstrap Software (IGS-RXBOOT), Version 10.2(8a), RELEASE SOFTWARE (fc1)
Copyright (c) 1986-1995 by cisco Systems, Inc.
Compiled Tue 24-Oct-95 15:46 by mkamson
Image text-base: 0x01020000, data-base: 0x00001000
cisco 2500 (68030) processor (revision D) with 16380K/2048K bytes of memory.
Processor board serial number 02986054 with hardware revision 00000000
X.25 software, Version 2.0, NET2, BFE and GOSIP compliant.
ISDN software, Version 1.0.
1 Ethernet/IEEE 802.3 interface.
2 Serial network interfaces.
1 ISDN Basic Rate interface.
32K bytes of non-volatile configuration memory.
16384K bytes of processor board System flash (Read/Write)
Loading network-confg ... [timed out]
Loading 2503b-confg ... [timed out]
Press RETURN to get started!
2503B(boot)>
Hij start dus niet in de gewone IOS, ik ga er dus van uit dat hij niet in de routers flash geheugen zit.
ik denk dat hij probeert contact te maken met een remote computer waar de IOS op staat van de voringe eigenaar. Right?
nu heb ik die IOS wel op de computer staan maar hoe ga ik die op de router zetten.
Als ik het mis heb graag laat het me even weten.
Uit eindelijk is mijn vraag hoe ga ik die IOS op die router krijgen met een TFTP progamma.
Kan niet via Serial.
Kan niet via de ISDN poort.
Kan niet via de AUX poort.
Hoe dan ???
ik hoop dat iemand mij kan helpen.
als je vragen hebt let me know