/u/38899/lainavantar3.JPG?f=community)
Ik ben een beetje erg onzeker over welke soundcard ik nou moet kopen. Ik heb een beetje door de creative site gebladert (creative is altijd goed voor me geweest).
Het leek mij leuk om een Sound Blaster® Audigy® 2 ZS te kopen.
Maar ik vroeg mij af of mijn speaker set dan wel digital seround 5.1 goed af handeld i.v.m. ingangen. Ik ben helaas echt n00b in dit soord dingen. De specificaties van mijn speakerset Cambridge Soundworks ddt 2500 heb ik wel al gevonden, en staan hier onder.
Hebben jullie de kennis om te bepalen of de onderstaande specificaties gecombineerd met de Audigy specificaties (Helemaal onderaan
) 5.1 aan kunnen?
<Lading meuk>
5.1 CHANNEL INPUT N/A
AM/FM TUNER NO
AMPLIFIED SUBWOOFER NO
BUILT-IN SUBWOOFER YES
CENTER SPEAKER DIMENSIONS 3 1/2"H X 3 1/2"W X 3 1/2"D
CENTER SPEAKER DRIVERS 1-WAY
COMPONENT DIMENSIONS 2 3/4"H X 9 1/8"W X 6 3/4"D
DOLBY DIGITAL DECODER YES
DOLBY PRO-LOGIC YES
DSP SOUNDFIELDS NO
DTS DIGITAL DECODER NO
EQUALIZER NO
FRONT A/V INPUTS NONE
FRONT SPEAKER DIMENSIONS 3 1/2"H X 3 1/2"W X 3 1/2"D
HEADPHONE JACK NO
ILLUMINATED REMOTE CONTROL NO
LENGTH OF COMPONENT WARRANTY 1 YR
LENGTH OF SUBWOOFER WARRANTY 1 YR
MAIN SPEAKER OUTPUT PAIRS 1
MAIN SPEAKER TYPE SATELLITE
OPTICAL DIGITAL INPUT NONE
OPTICAL DIGITAL OUTPUT NONE
PHONO INPUT NONE
POWER MAIN 7.5 W/CH
PREAMP OUTPUT NONE
REAR A/V INPUTS 2
REAR SPEAKER DIMENSIONS 3 1/2"H X 3 1/2"W X 3 1/2"D
REMOTE CONTROL NO
RF ANTENNA INPUTS NONE
SIMULATED SURROUND NO
SPEAKER WARRANTY 1 YR
STEREO POWER 7 W/CH
SUBWOOFER DEPTH DIMENSION 14"
SUBWOOFER HEIGHT DIMENSION 8"
SUBWOOFER INCLUDED YES
SUBWOOFER OUTPUTS 1
SUBWOOFER SIZE 5 1/4"
SUBWOOFER WIDTH DIMENSION 6 1/2"
SURROUND POWER CENTER 21 W/CH
SURROUND POWER REAR 7.5 W/CH
SURROUND SPEAKER TYPE MONOPOLE
TAPE MONITOR OUTPUTS NONE
TONE CONTROLS NO
TOTAL HARMONIC DISTORTION N/A
High Definition Audio Quality for Playback and Recording
* 24-bit Digital-to-Analog conversion during playback with sampling rates of 8, 11.025, 16, 22.05, 24, 32, 44.1, 48 and 96kHz in 7.1 mode and up to 192kHz in stereo mode
* 24-bit Analog-to-Digital conversion during recording in 8, 16 or 24-bit at sampling rates of 8, 11.025, 16, 22.05, 24, 32, 44.1, 48 and 96kHz
* SPDIF (Sony/Philips Digital Interface) input at up to 24-bit/96kHz quality
* SPDIF output up to 24-bit at 48 or 96kHz
* ASIO drivers for low latency(≤2ms) multi-track playback and recording at 16-bit/48kHz
Sound Blaster® Audigy™ 2 ZS On-Board Connectors
* Line level out (Front / Rear / Center / Subwoofer / Rear Center)
* Digital Out for 5.1 support(6-channel SPDIF output to Creative digital speakers
* Line in
* Microphone in
* FireWire® (IEEE® 1394)
* Telephone Answering Device in
* Analog / Digital CD Audio in
* 15-pin MIDI / Joystick port extension header
* Internal IEEE® 1394 header to Sound Blaster Audigy 2 ZS Internal Drive (Upgrade Option)
* AD_EXT extension header to the Sound Blaster Audigy 2 ZS Internal Drive (Upgrade Option)
</Lading meuk>
Het leek mij leuk om een Sound Blaster® Audigy® 2 ZS te kopen.
Maar ik vroeg mij af of mijn speaker set dan wel digital seround 5.1 goed af handeld i.v.m. ingangen. Ik ben helaas echt n00b in dit soord dingen. De specificaties van mijn speakerset Cambridge Soundworks ddt 2500 heb ik wel al gevonden, en staan hier onder.
Hebben jullie de kennis om te bepalen of de onderstaande specificaties gecombineerd met de Audigy specificaties (Helemaal onderaan
) 5.1 aan kunnen?<Lading meuk>
5.1 CHANNEL INPUT N/A
AM/FM TUNER NO
AMPLIFIED SUBWOOFER NO
BUILT-IN SUBWOOFER YES
CENTER SPEAKER DIMENSIONS 3 1/2"H X 3 1/2"W X 3 1/2"D
CENTER SPEAKER DRIVERS 1-WAY
COMPONENT DIMENSIONS 2 3/4"H X 9 1/8"W X 6 3/4"D
DOLBY DIGITAL DECODER YES
DOLBY PRO-LOGIC YES
DSP SOUNDFIELDS NO
DTS DIGITAL DECODER NO
EQUALIZER NO
FRONT A/V INPUTS NONE
FRONT SPEAKER DIMENSIONS 3 1/2"H X 3 1/2"W X 3 1/2"D
HEADPHONE JACK NO
ILLUMINATED REMOTE CONTROL NO
LENGTH OF COMPONENT WARRANTY 1 YR
LENGTH OF SUBWOOFER WARRANTY 1 YR
MAIN SPEAKER OUTPUT PAIRS 1
MAIN SPEAKER TYPE SATELLITE
OPTICAL DIGITAL INPUT NONE
OPTICAL DIGITAL OUTPUT NONE
PHONO INPUT NONE
POWER MAIN 7.5 W/CH
PREAMP OUTPUT NONE
REAR A/V INPUTS 2
REAR SPEAKER DIMENSIONS 3 1/2"H X 3 1/2"W X 3 1/2"D
REMOTE CONTROL NO
RF ANTENNA INPUTS NONE
SIMULATED SURROUND NO
SPEAKER WARRANTY 1 YR
STEREO POWER 7 W/CH
SUBWOOFER DEPTH DIMENSION 14"
SUBWOOFER HEIGHT DIMENSION 8"
SUBWOOFER INCLUDED YES
SUBWOOFER OUTPUTS 1
SUBWOOFER SIZE 5 1/4"
SUBWOOFER WIDTH DIMENSION 6 1/2"
SURROUND POWER CENTER 21 W/CH
SURROUND POWER REAR 7.5 W/CH
SURROUND SPEAKER TYPE MONOPOLE
TAPE MONITOR OUTPUTS NONE
TONE CONTROLS NO
TOTAL HARMONIC DISTORTION N/A
High Definition Audio Quality for Playback and Recording
* 24-bit Digital-to-Analog conversion during playback with sampling rates of 8, 11.025, 16, 22.05, 24, 32, 44.1, 48 and 96kHz in 7.1 mode and up to 192kHz in stereo mode
* 24-bit Analog-to-Digital conversion during recording in 8, 16 or 24-bit at sampling rates of 8, 11.025, 16, 22.05, 24, 32, 44.1, 48 and 96kHz
* SPDIF (Sony/Philips Digital Interface) input at up to 24-bit/96kHz quality
* SPDIF output up to 24-bit at 48 or 96kHz
* ASIO drivers for low latency(≤2ms) multi-track playback and recording at 16-bit/48kHz
Sound Blaster® Audigy™ 2 ZS On-Board Connectors
* Line level out (Front / Rear / Center / Subwoofer / Rear Center)
* Digital Out for 5.1 support(6-channel SPDIF output to Creative digital speakers
* Line in
* Microphone in
* FireWire® (IEEE® 1394)
* Telephone Answering Device in
* Analog / Digital CD Audio in
* 15-pin MIDI / Joystick port extension header
* Internal IEEE® 1394 header to Sound Blaster Audigy 2 ZS Internal Drive (Upgrade Option)
* AD_EXT extension header to the Sound Blaster Audigy 2 ZS Internal Drive (Upgrade Option)
</Lading meuk>
dwyslexy != luiheid !! Taalpuristen sla uw slag