Ik heb een Lite-on 832S
Die heeft al een maand zeer goed dienst gedaan, echt zeer tevreden van.
Nu wou ik een DVD+RW brandden, ik selecteer 3gig.
Hij begint met formateren (schijf was nog nooit gebruik) en dan begint hij met brandden, achter 20minuten zegt hij burn proces completed successfull. Ik haal de DVD eruit, ik steek hem er weer in, pc zegt: lege CD
Er staat echt niets op
Dan probeer ik nog iets, ik zet er gewoon een 10mb file op, weer niets op de DVD
Dit is de log van dat 10mb file'tje dat ik wou brandden :
Die heeft al een maand zeer goed dienst gedaan, echt zeer tevreden van.
Nu wou ik een DVD+RW brandden, ik selecteer 3gig.
Hij begint met formateren (schijf was nog nooit gebruik) en dan begint hij met brandden, achter 20minuten zegt hij burn proces completed successfull. Ik haal de DVD eruit, ik steek hem er weer in, pc zegt: lege CD
Er staat echt niets op
Dan probeer ik nog iets, ik zet er gewoon een 10mb file op, weer niets op de DVD
Dit is de log van dat 10mb file'tje dat ik wou brandden :
code:
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
| 21:49:55 #12 Phase 24 File dlgbrnst.cpp, Line 1800
Caching of files started
21:49:55 #13 Text 0 File Burncd.cpp, Line 4073
Cache writing successful.
21:49:55 #14 Phase 25 File dlgbrnst.cpp, Line 1800
Caching of files completed
21:49:55 #15 Phase 36 File dlgbrnst.cpp, Line 1800
Burn process started at 2.4x (3.312 KB/s)
21:49:55 #16 Text 0 File ThreadedTransferInterface.cpp, Line 2264
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0
21:49:55 #17 Text 0 File Cdrdrv.cpp, Line 7941
---- DVD Structure: Physical Format Information (00h) ----
Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD+RW (9), Part Version: 2
Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: re-writable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: 26053F h
End Sector Number in Layer 0: 0 h
Data in Burst Cutting Area (BCA) does not exist
Media Specific:
00 00 49 4E 46 4F 44 49 - 53 43 41 30 31 02 39 23 ..INFODISCA01.9#
00 8E 7A 56 02 1A 00 90 - 83 64 02 1E 00 86 7E 5E ..zV.....d....~^
02 1E 04 04 10 F0 00 00 - 00 00 00 00 00 00 00 00 ................
21:49:55 #18 Text 0 File dlgbrnst.cpp, Line 1658
Set remaining time: 5:40,380 (340380ms) -> OK
21:49:55 #19 Phase 98 File dlgbrnst.cpp, Line 1800
Start formatting disc before burning
21:50:20 #20 Phase 100 File dlgbrnst.cpp, Line 1800
Formatting disc was successful
21:50:20 #21 Phase 65 File dlgbrnst.cpp, Line 1800
Burn process started
21:50:20 #22 Text 0 File DVDPlusRW.cpp, Line 564
Start write address at LBA 0
DVD high compatibility mode: Yes
21:50:26 #23 Text 0 File WriterStatus.cpp, Line 115
<LITE-ON DVDRW SOHW-832S > start writing Lead-Out at LBA 9120 (23A0h), lenght 0 blocks
21:50:26 #24 Text 0 File ThreadedTransfer.cpp, Line 229
all writers idle, stopping conversion
21:50:27 #25 Text 0 File DVDPlusRW.cpp, Line 718
Media-Format will be stopped after burning
21:50:27 #26 Phase 128 File dlgbrnst.cpp, Line 1800
Generating DVD high compatibility borders
21:53:16 #27 Text 0 File DVDPlusRW.cpp, Line 796
Media-Format is stopped successfully
21:53:16 #28 Text 0 File dlgbrnst.cpp, Line 1658
Set remaining time: 0:00,000 (0ms) -> OK
21:53:16 #29 Phase 129 File dlgbrnst.cpp, Line 1800
Generating DVD borders completed successfully
21:53:16 #30 Text 0 File dlgbrnst.cpp, Line 1658
Set remaining time: 0:00,000 (0ms) -> OK
21:53:16 #31 Phase 37 File dlgbrnst.cpp, Line 1800
Burn process completed successfully at 2.4x (3.312 KB/s) |