Ik heb nu al tijden performance problemen met m'n desktop pc. Met name met het spelen van spellen merk ik dat m'n pc onder de maat presteert. Spellen zoals farcry en UT2004 zijn amper speelbaar terwijl het bij vrienden met een duidelijk mindere pc zelfs beter loopt dan bij mij. Zelfs een relatief oud spel als Quake III komt af en toe onder de 50 fps!!
Ik ben niet de eerste de beste computer n00b maar op het moment dat het om hardware problemen gaat haak ik toch al snel af. Zeker als ik de logica er niet meer in kan vinden.
PC Specs:
Ik heb al een tijd zitten kijken naar de resulaten van sisoft sandra (een tooltje dat ik op got veel tegen kwam). Nu heb ik al 2x m'n bios geflashed maar elke keer krijg ik toch weer deze domme melding over een te oud bios. Zelfs voor het flashen geeft het flashtooltje al aan dat m'n bios up-to-date is.
Waar ik helemaal nix van snap ik deze melding "Warning 2533 : Processor 1 : Disabled host controllers are present. Check BIOS settings.". Ik heb echt al velen malen m'n bios nagelopen maar nix wat lijkt te helpen. Ook de default en best performance instellingen (zoals het flash tooltje aangeeft) helpen niet.
Systeem Analyse:
Ik hoop echt dat iemand hier me kan helpen want het is doodzonde om een (op papier) goede pc zo slecht te zien presteren.
Ik ben niet de eerste de beste computer n00b maar op het moment dat het om hardware problemen gaat haak ik toch al snel af. Zeker als ik de logica er niet meer in kan vinden.
PC Specs:
code:
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
| SiSoftware Sandra System Host Name : SANDER User : San Domain : SANDER Processor Model : Intel(R) Pentium(R) 4 CPU 2.00GHz Speed : 1.99GHz Performance Rating : PR2191 (estimated) Type : Standard L2 On-board Cache : 256kB ECC Synchronous ATC (8-way sectored, 64 byte line size) Mainboard Bus(es) : ISA AGP PCI USB i2c/SMBus MP Support : No MP APIC : No System BIOS : American Megatrends Inc. 07.00T Mainboard : ECS P4S5A/DX Total Memory : 511MB SDRAM Chipset 1 Model : Silicon Integrated Systems (SiS) SiS645DX CPU to PCI Bridge Front Side Bus Speed : 4x 100MHz (400MHz data rate) Total Memory : 512MB SDRAM Video System Monitor/Panel : Plug and Play Monitor Adapter : NVIDIA GeForce4 Ti 4200 with AGP8X Physical Storage Devices Removable Drive : Floppy disk drive Hard Disk : Maxtor 6Y080L0 (74.5GB) CD-ROM/DVD : AOPEN 16XDVD-ROM/AMH (CD 48X Rd) (DVD 6X Rd) CD-ROM/DVD : ATAPI CD-R/RW 24X10 (CD 40X Rd, 24X Wr) CD-ROM/DVD : AXV CD/DVD-ROM SCSI CdRom Device (CD 32X Rd) (DVD 4X Rd) CD-ROM/DVD : Generic STEALTH DVD SCSI CdRom Device (CD 32X Rd) (DVD 4X Rd) Logical Storage Devices 1.44MB 3.5" (A:) : N/A Local disk (C:) : 14.6GB (6.7GB, 46% Free) (NTFS) Data1 (D:) : 22.0GB (3.3GB, 15% Free) (FAT32) Data2 (E:) : 22.0GB (5.8GB, 26% Free) (FAT32) CD-ROM/DVD (F:) : N/A CD-ROM/DVD (G:) : N/A CD-ROM/DVD (H:) : N/A CD-ROM/DVD (J:) : N/A Peripherals Serial/Parallel Port(s) : 2 COM / 1 LPT USB Controller/Hub : SiS 7001 PCI to USB Open Host Controller USB Controller/Hub : SiS 7001 PCI to USB Open Host Controller USB Controller/Hub : USB Root Hub USB Controller/Hub : USB Root Hub Keyboard : Standard 101/102-Key or Microsoft Natural PS/2 Keyboard Mouse : Microsoft PS/2 Mouse MultiMedia Device(s) Device : MPU-401 Compatible MIDI Device Device : Standard Game Port Device : SiS 7012 Audio Driver Printers and Faxes Model : Microsoft Office Document Image Writer Model : \\FREEBSD_SERVER\deskjet5550 Operating System(s) Windows System : Microsoft Windows XP/2002 Professional (Win32 x86) 5.01.2600 (Service Pack 1) Network Services Network Drivers Enabled : Yes Adapter : Realtek RTL8139/810x Family Fast Ethernet NIC |
Ik heb al een tijd zitten kijken naar de resulaten van sisoft sandra (een tooltje dat ik op got veel tegen kwam). Nu heb ik al 2x m'n bios geflashed maar elke keer krijg ik toch weer deze domme melding over een te oud bios. Zelfs voor het flashen geeft het flashtooltje al aan dat m'n bios up-to-date is.
Waar ik helemaal nix van snap ik deze melding "Warning 2533 : Processor 1 : Disabled host controllers are present. Check BIOS settings.". Ik heb echt al velen malen m'n bios nagelopen maar nix wat lijkt te helpen. Ook de default en best performance instellingen (zoals het flash tooltje aangeeft) helpen niet.
Systeem Analyse:
code:
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160
161
162
163
164
165
166
167
168
169
170
171
172
173
174
175
176
177
| SiSoftware Sandra System Summary Analysing... Finished Successfully : Yes Mainboard Information Analysing... Warning 2533 : Disabled host controllers are present. Check BIOS settings. Notice 224 : SMBIOS/DMI information may be inaccurate. Tip 2511 : Some memory slots are free so the memory can be easily upgraded. Tip 2546 : Large memory modules should be ECC/Parity. Finished Successfully : Yes CPU & BIOS Information Analysing... Warning 2533 : Processor 1 : Disabled host controllers are present. Check BIOS settings. Tip 210 : Processor 1 : Mainboard supports faster CPUs, so the CPU can be upgraded when needed. Notice 224 : Processor 1 : SMBIOS/DMI information may be inaccurate. Tip 201 : System BIOS : System BIOS is old. Check for an update. Notice 224 : System BIOS : SMBIOS/DMI information may be inaccurate. Tip 212 : System BIOS : BIOS can be shadowed so check whether it is. Tip 211 : System BIOS : BIOS is flash-able and socketed so it can be upgraded when needed. Finished Successfully : Yes APM & ACPI Information Analysing... Notice 224 : SMBIOS/DMI information may be inaccurate. Finished Successfully : Yes PCI, AGP, CardBus Bus(es) Information Analysing... Warning 1206 : Silicon Integrated Systems (SiS) SiS5513 EIDE Controller (A,B step) : PCI latency too high. Device could hog the bus for too long. Finished Successfully : Yes Video System Information Analysing... Tip 2221 : Primary Display Driver (display) : Driver is not certified. Finished Successfully : Yes Windows Memory Information Analysing... Finished Successfully : Yes Drives Information Analysing... Warning : 1.44MB 3.5" (A:) : Cannot obtain drive information; check that a disk is in the drive and it is correctly formatted. Warning : CD-ROM/DVD (F:) : Cannot obtain drive information; check that a disk is in the drive and it is correctly formatted. Warning : CD-ROM/DVD (G:) : Cannot obtain drive information; check that a disk is in the drive and it is correctly formatted. Warning : CD-ROM/DVD (H:) : Cannot obtain drive information; check that a disk is in the drive and it is correctly formatted. Warning : CD-ROM/DVD (J:) : Cannot obtain drive information; check that a disk is in the drive and it is correctly formatted. Finished Successfully : Yes Ports Information Analysing... Finished Successfully : Yes Keyboard Information Analysing... Finished Successfully : Yes Mouse Information Analysing... Finished Successfully : Yes Sound Card Information Analysing... Finished Successfully : Yes Printer and Fax Information Analysing... Finished Successfully : Yes MCI Devices Information Analysing... Finished Successfully : Yes Windows Information Analysing... Tip 1300 : Enter your company name or "Home" instead of "Unknown". Finished Successfully : Yes WinSock Information Analysing... Finished Successfully : Yes Processes Information Analysing... Tip 1601 : SiSoftware Sandra : Program consumes a large amount of memory. Finished Successfully : Yes Modules Information Analysing... Finished Successfully : Yes OLE Information Analysing... Finished Successfully : Yes DirectX Information Analysing... Tip 2221 : Primary Display Driver (display) : Driver is not certified. Finished Successfully : Yes Network Information Analysing... Finished Successfully : Yes SCSI Information Analysing... Warning 2600 : Maxtor 6 Y080L0 : SCSI version does not adhere to ANSI. Probably ATA/ATAPI device. Warning 2600 : ATAPI CD-R/RW 24X10 : SCSI version does not adhere to ANSI. Probably ATA/ATAPI device. Warning 2600 : AOPEN 16XDVD-ROM/AMH : SCSI version does not adhere to ANSI. Probably ATA/ATAPI device. Finished Successfully : Yes Font Information Analysing... Finished Successfully : Yes CMOS Information Analysing... Finished Successfully : Yes OpenGL Video Information Analysing... Finished Successfully : Yes Services Information Analysing... Tip 2130 : Error Reporting Service : Service may be disabled on Home/Professional OS version. Tip 2130 : Help and Support : Service may be disabled on Home/Professional OS version. Tip 2130 : Messenger : Service may be disabled on Home/Professional OS version. Tip 2130 : IPSEC Services : Service may be disabled on Home/Professional OS version. Tip 2130 : Remote Registry : Service may be disabled on Home/Professional OS version. Tip 2130 : Secondary Logon : Service may be disabled on Home/Professional OS version. Tip 2130 : Distributed Link Tracking Client : Service may be disabled on Home/Professional OS version. Finished Successfully : Yes ATA/ATAPI Information Analysing... Warning 3100 : ATA device (fixed) : SMART not enabled; consider enabling for safety. Warning 3103 : ATA device (fixed) : Acoustic Management enabled. Peformance may be impaired. Warning 3104 : ATA device (fixed) : Current mode not optimal. Check settings. Finished Successfully : Yes Data Sources Information Analysing... Tip 3001 : ODBC Information : ODBC driver support old; should support ODBC 3.52 or later. Tip 3001 : ODBC Information : ODBC driver support old; should support ODBC 3.52 or later. Error : Procedures/Functions : No procedures/functions found. Error : Could not connect to the database. : Could not connect to the database. Error : Could not connect to the database. : Could not connect to the database. Error : Could not connect to the database. : Could not connect to the database. Finished Successfully : Yes Hardware IRQ Settings Analysing... Finished Successfully : Yes DMA Settings Analysing... Finished Successfully : Yes I/O Settings Analysing... Finished Successfully : Yes Memory Resources Analysing... Finished Successfully : Yes Plug & Play Enumerator Analysing... Finished Successfully : Yes Performance Tune-up Wizard Finished Successfully : Yes |
Ik hoop echt dat iemand hier me kan helpen want het is doodzonde om een (op papier) goede pc zo slecht te zien presteren.