Hallo,
ik heb nu al een tijdje een laptop, maar het enige probleem is dat ik PowerNow niet aan de praat krijg. Dit is nogal lastig omdat mijn batterij dan zinloos sneller leeg gaat. Ik heb al verscheidene topics gezocht maar nog steeds niet echt op een goed antwoord gekomen.
Ik heb het al geprobeert met de amdk7.sys... werkte niet
Ook heb ik het op deze manier geprobeerd, wat ook niets opleverde, (met een aantal bestandjes van microsoft.com (Q306458_WxP_SP1_x86_enu.exe)) -->
Bij voorbaat dank
ik heb nu al een tijdje een laptop, maar het enige probleem is dat ik PowerNow niet aan de praat krijg. Dit is nogal lastig omdat mijn batterij dan zinloos sneller leeg gaat. Ik heb al verscheidene topics gezocht maar nog steeds niet echt op een goed antwoord gekomen.
Ik heb het al geprobeert met de amdk7.sys... werkte niet
Ook heb ik het op deze manier geprobeerd, wat ook niets opleverde, (met een aantal bestandjes van microsoft.com (Q306458_WxP_SP1_x86_enu.exe)) -->
Heeft iemand hier een oplossing voor?To Install the Driver
WARNING: If you use Registry Editor incorrectly, you may cause serious problems that may require you to reinstall your operating system. Microsoft cannot guarantee that you can solve problems that result from using Registry Editor incorrectly. Use Registry Editor at your own risk.
To install the and configure the driver:
Click Start, click Control Panel, click Performance and Maintenance, and then click System.
On the Hardware tab, click Device Manager.
Double-click the Processors branch to expand it, right-click your processor, and then click Update Driver.
Click Install from a list or specified location, and then click Next.
Click Don't search. I will choose the driver to install, and then click Next.
Click Have Disk, select the folder in which you extracted the Amdk7.sys and K7qfe.inf files, and then click OK.
The AMD K7 Processor driver is listed. Click Next.
Click Finish, and then click OK.
Do not restart the computer.
Start Registry Editor (Regedit.exe).
Locate and click the following key in the registry:
HKEY_LOCAL_MACHINE\System\CCS\Services\AmdK7\Parameters
On the Edit menu, point to New, click Dword Value, and then add the following registry value:
Value name: HackFlags
Radix: Hexadecimal
Value data: 1
A value of 1 enables the legacy PowerNow! interface. To disable this feature, set the data value to 0.
Quit Registry Editor.
Restart the computer.
Bij voorbaat dank
[ Voor 1% gewijzigd door Verwijderd op 09-06-2004 02:30 . Reden: [code] > [q] ivm layoutvertrekking ]