Toon posts:

Sony CRX100 Firmware

Pagina: 1
Acties:
  • 119 views sinds 30-01-2008
  • Reageer

Verwijderd

Topicstarter
Wie weet of je met de nieuwe firmware van Sony voor de CRX100 (v1.0n) kan overburnen???

Ik heb gehoord dat je nu wel 80 min kan branden, maar of hij nu ook overburnt op 74 min??

Verwijderd

Topicstarter
Weet echt niemand dit?? Ik wil namelijk zo snel mogelijk mijn writer upgraiden als ik dan kan overburnen!!

  • Red devil
  • Registratie: December 1999
  • Laatst online: 21:41
Ik ga hem dit weekend thuis upgraden, nog ff geduld en ik post het resultaat wel.

  • Canard
  • Registratie: Oktober 1999
  • Laatst online: 22-08 13:18
Iemand nog geprobeerd??

  • Cyberdeck
  • Registratie: Januari 2000
  • Laatst online: 07-01-2024

Cyberdeck

bizar

Iemand deze upgrade ook geprobeerd bij de hp8100i (=sony crx100)??? Lukt dat? Dan kan ik het namelijk ook bij mijn vader doen..

Verwijderd

Je kunt inderdaad de HP ook flashen met deze firmware . Hij wordt dan voortaan herkent als een Sony . 80 minuten cd's heb ik nog niet geprobeerd .

Verwijderd

HP8100 users can now burn 80min CDs ?! (Thanks Astrapi for news)

".. If you want to make 80 min CD's then you have too read this Sony (crx100) has released a new firmware its version 1.0n but the good part about it is that this firmware Supports 80 min CD's. Now here comes the clue : >>The HP8100x and the SonyCrx100 are the same drives << just like the CRX140 and the HP9100 but the big different between the Crx100 and the HP8100 is that the Sony now can do 80 min CD's and the HP8100 not.


BUT if you update the HP8100 with the firmware off the Sony Crx100 you can also do 80 min!. There are only 2 things that will change :


1) The blinking off the led will be different
2) The HP8100 will be renamed to the Sony Crx100 !!!! (but who cares at least it does 80 min !!!!)

Update : If you check in HP's support page :


"..All HP CD-Writers, with the exception of the 4020, 6020, 7100, 7200, and 8270 series drives, are capable of writing to this media with the included software (see table below). However, because of recent in-house testing, we have discovered that recording to this media can be unreliable. The manufacturing process for creating 80-minute discs is difficult, and reduces the track pitch tolerance necessary to meet Orange Book specifications. HP believes this reduces the reliability below HP's strict quality standards. As a result, created discs may be unreadable; therefore, we discourage using this media for storing critical information at this time. HP is unable to provide technical assistance on issues related to using 80-minute media. If you are experiencing difficulty with 80-minute media, please refer to the manufacturer of that media for support.."

  • Canard
  • Registratie: Oktober 1999
  • Laatst online: 22-08 13:18
heeft iemand 'm nou geprobeerd??

  • Cyberdeck
  • Registratie: Januari 2000
  • Laatst online: 07-01-2024

Cyberdeck

bizar

volgend weekend ga ik de 8100 flashen (bij mijn vader). Ik hoop dat het goed gaat anders ben ik de pisang ambon!
Oftewel ik geef mijn vader gewoon het tooltje en zeg dat hij maar moet kijken of ie het wil of niet..

Verwijderd

Ja, ik heb de tweak van CDFREAKS.COM en het werkt PERFECT op de HP8100+... alleen dat anders knipperen van het ledje dan, het linker ledje bleef gewoonweg uit?! Maargoed, dat interesseert natuurlijk geen hond als ik nu maar mooi tot de volle 700 Meg vol kan zetten...

DUS UPDATE IS ZEKERS DE MOEITE...

  • Cyberdeck
  • Registratie: Januari 2000
  • Laatst online: 07-01-2024

Cyberdeck

bizar

Komt omdat de sony drives maar 1 ledje hebben!

Verwijderd

da dach ik al ja... maargoed, evenwel lache, dat het ledje niet meer anders knippert in test-fase als in brand-fase... je kunt dus niet meer aan de brander zien of hij aan het testen is of werkelijk zijn laser aan heeft staan en een cdtje volfikt!!!

Maargoed, alles is nu wel duidelijk zo, dacht ik... Gtx. RoB

Verwijderd

da dach ik al ja... maargoed, evenwel lache, dat het ledje niet meer anders knippert in test-fase als in brand-fase... je kunt dus niet meer aan de brander zien of hij aan het testen is of werkelijk zijn laser aan heeft staan en een cdtje volfikt!!!

Maargoed, alles is nu wel duidelijk zo, dacht ik... Gtx. RoB
Pagina: 1