[Debian] linux-wlan-ng make config

[jp73]

Ik volg precies de README, heb met wget de file linux-wlan-ng gedownload en naar /usr/src/ gekopieerd.
daar tar zxvf linux-wlan-ng-0.2.1-pre20.tar.gz gedaan


daarna moet ik make config doen en dat gaat niet, ik heb geen idee wat ik fout doe.......

hieronder staat de tekst die ik op het scherm krijg.....

ik probeer nu al sinds 5 dagen een sis grafische kaart werkend te krijgen zonder succes...... nu deze wlan usb van acer...... ik word tamelijk moedeloos ......


BX2000:/usr/src# ls
kernel-image-2.4.26.080504_10.00.Custom_i386.deb kernel-source-2.4.26 linux-wlan-ng-0.2.1-pre20.tar.gz
kernel-image-2.4.26.090504+1_10.00.Custom_i386.deb kernel-source-2.4.26.tar.bz2 rpm
kernel-image-2.4.26.090504_10.00.Custom_i386.deb linux xfree86-4.4.0-drm.tar.gz
BX2000:/usr/src# tar xzvf linux-wlan-ng-0.2.1-pre20.tar.gz
linux-wlan-ng-0.2.1-pre20/
linux-wlan-ng-0.2.1-pre20/doc/
linux-wlan-ng-0.2.1-pre20/doc/Makefile
linux-wlan-ng-0.2.1-pre20/doc/capturefrm.txt
linux-wlan-ng-0.2.1-pre20/doc/config.debug
linux-wlan-ng-0.2.1-pre20/doc/config.linux-wlan-ng
linux-wlan-ng-0.2.1-pre20/doc/releasepolicy.txt
linux-wlan-ng-0.2.1-pre20/doc/rh71notes
linux-wlan-ng-0.2.1-pre20/doc/codingstd/
linux-wlan-ng-0.2.1-pre20/doc/codingstd/format.hfile
linux-wlan-ng-0.2.1-pre20/doc/codingstd/format.srcfile
linux-wlan-ng-0.2.1-pre20/doc/codingstd/format.srcfile.c
linux-wlan-ng-0.2.1-pre20/doc/codingstd/format.srcfile.html
linux-wlan-ng-0.2.1-pre20/doc/codingstd/linux.CodingStyle
linux-wlan-ng-0.2.1-pre20/doc/prism2/
linux-wlan-ng-0.2.1-pre20/doc/prism2/ridlist-mib.html
linux-wlan-ng-0.2.1-pre20/doc/prism2/ridlist-mib.txt
linux-wlan-ng-0.2.1-pre20/doc/prism2/ridlist-rid.html
linux-wlan-ng-0.2.1-pre20/doc/prism2/ridlist-rid.txt
linux-wlan-ng-0.2.1-pre20/.cvsignore
linux-wlan-ng-0.2.1-pre20/CHANGES
linux-wlan-ng-0.2.1-pre20/COPYING
linux-wlan-ng-0.2.1-pre20/Configure
linux-wlan-ng-0.2.1-pre20/FAQ
linux-wlan-ng-0.2.1-pre20/LICENSE
linux-wlan-ng-0.2.1-pre20/Makefile
linux-wlan-ng-0.2.1-pre20/README
linux-wlan-ng-0.2.1-pre20/THANKS
linux-wlan-ng-0.2.1-pre20/TODO
linux-wlan-ng-0.2.1-pre20/config.in
linux-wlan-ng-0.2.1-pre20/add-ons/
linux-wlan-ng-0.2.1-pre20/add-ons/keygen/
linux-wlan-ng-0.2.1-pre20/add-ons/keygen/Makefile
linux-wlan-ng-0.2.1-pre20/add-ons/keygen/keygen.c
linux-wlan-ng-0.2.1-pre20/add-ons/lwepgen/
linux-wlan-ng-0.2.1-pre20/add-ons/lwepgen/Makefile
linux-wlan-ng-0.2.1-pre20/add-ons/lwepgen/lwepgen.c
linux-wlan-ng-0.2.1-pre20/etc/
linux-wlan-ng-0.2.1-pre20/etc/wlan/
linux-wlan-ng-0.2.1-pre20/etc/wlan/Makefile
linux-wlan-ng-0.2.1-pre20/etc/wlan/shared
linux-wlan-ng-0.2.1-pre20/etc/wlan/wlan.conf
linux-wlan-ng-0.2.1-pre20/etc/wlan/wlancfg-DEFAULT
linux-wlan-ng-0.2.1-pre20/etc/Makefile
linux-wlan-ng-0.2.1-pre20/etc/rc.wlan
linux-wlan-ng-0.2.1-pre20/etc/wlan.agent
linux-wlan-ng-0.2.1-pre20/etc/pcmcia/
linux-wlan-ng-0.2.1-pre20/etc/pcmcia/Makefile
linux-wlan-ng-0.2.1-pre20/etc/pcmcia/wlan-ng
linux-wlan-ng-0.2.1-pre20/etc/pcmcia/wlan-ng.conf
linux-wlan-ng-0.2.1-pre20/man/
linux-wlan-ng-0.2.1-pre20/man/Makefile
linux-wlan-ng-0.2.1-pre20/man/nwepgen.man
linux-wlan-ng-0.2.1-pre20/man/wlancfg.man
linux-wlan-ng-0.2.1-pre20/man/wlanctl-ng.man
linux-wlan-ng-0.2.1-pre20/man/wland.man
linux-wlan-ng-0.2.1-pre20/scripts/
linux-wlan-ng-0.2.1-pre20/scripts/.cvsignore
linux-wlan-ng-0.2.1-pre20/scripts/Makefile
linux-wlan-ng-0.2.1-pre20/scripts/Makefile.get_options
linux-wlan-ng-0.2.1-pre20/scripts/get_version.c
linux-wlan-ng-0.2.1-pre20/scripts/pda.pl
linux-wlan-ng-0.2.1-pre20/src/
linux-wlan-ng-0.2.1-pre20/src/.cvsignore
linux-wlan-ng-0.2.1-pre20/src/Makefile
linux-wlan-ng-0.2.1-pre20/src/README
linux-wlan-ng-0.2.1-pre20/src/version.h.in
linux-wlan-ng-0.2.1-pre20/src/include/
linux-wlan-ng-0.2.1-pre20/src/include/wlan/
linux-wlan-ng-0.2.1-pre20/src/include/wlan/.cvsignore
linux-wlan-ng-0.2.1-pre20/src/include/wlan/p80211conv.h
linux-wlan-ng-0.2.1-pre20/src/include/wlan/p80211hdr.h
linux-wlan-ng-0.2.1-pre20/src/include/wlan/p80211ioctl.h
linux-wlan-ng-0.2.1-pre20/src/include/wlan/p80211meta.h
linux-wlan-ng-0.2.1-pre20/src/include/wlan/p80211metamib.h
linux-wlan-ng-0.2.1-pre20/src/include/wlan/p80211metamsg.h
linux-wlan-ng-0.2.1-pre20/src/include/wlan/p80211mgmt.h
linux-wlan-ng-0.2.1-pre20/src/include/wlan/p80211msg.h
linux-wlan-ng-0.2.1-pre20/src/include/wlan/p80211netdev.h
linux-wlan-ng-0.2.1-pre20/src/include/wlan/p80211req.h
linux-wlan-ng-0.2.1-pre20/src/include/wlan/p80211types.h
linux-wlan-ng-0.2.1-pre20/src/include/wlan/wlan_compat.h
linux-wlan-ng-0.2.1-pre20/src/mkmeta/
linux-wlan-ng-0.2.1-pre20/src/mkmeta/.cvsignore
linux-wlan-ng-0.2.1-pre20/src/mkmeta/Makefile
linux-wlan-ng-0.2.1-pre20/src/mkmeta/mkmetadef.c
linux-wlan-ng-0.2.1-pre20/src/mkmeta/mkmetadefhead.txt
linux-wlan-ng-0.2.1-pre20/src/mkmeta/mkmetastruct.c
linux-wlan-ng-0.2.1-pre20/src/mkmeta/mkmetastructhead.txt
linux-wlan-ng-0.2.1-pre20/src/nwepgen/
linux-wlan-ng-0.2.1-pre20/src/nwepgen/.cvsignore
linux-wlan-ng-0.2.1-pre20/src/nwepgen/Makefile
linux-wlan-ng-0.2.1-pre20/src/nwepgen/nwepgen.c
linux-wlan-ng-0.2.1-pre20/src/p80211/
linux-wlan-ng-0.2.1-pre20/src/p80211/.cvsignore
linux-wlan-ng-0.2.1-pre20/src/p80211/Makefile
linux-wlan-ng-0.2.1-pre20/src/p80211/p80211conv.c
linux-wlan-ng-0.2.1-pre20/src/p80211/p80211frm.c
linux-wlan-ng-0.2.1-pre20/src/p80211/p80211mod.c
linux-wlan-ng-0.2.1-pre20/src/p80211/p80211netdev.c
linux-wlan-ng-0.2.1-pre20/src/p80211/p80211req.c
linux-wlan-ng-0.2.1-pre20/src/p80211/p80211wep.c
linux-wlan-ng-0.2.1-pre20/src/p80211/p80211wext.c
linux-wlan-ng-0.2.1-pre20/src/prism2/
linux-wlan-ng-0.2.1-pre20/src/prism2/Makefile
linux-wlan-ng-0.2.1-pre20/src/prism2/prism2_ssf.pda
linux-wlan-ng-0.2.1-pre20/src/prism2/shared.prism2
linux-wlan-ng-0.2.1-pre20/src/prism2/download/
linux-wlan-ng-0.2.1-pre20/src/prism2/download/.cvsignore
linux-wlan-ng-0.2.1-pre20/src/prism2/download/Makefile
linux-wlan-ng-0.2.1-pre20/src/prism2/download/prism2dl.c
linux-wlan-ng-0.2.1-pre20/src/prism2/driver/
linux-wlan-ng-0.2.1-pre20/src/prism2/driver/.cvsignore
linux-wlan-ng-0.2.1-pre20/src/prism2/driver/Makefile
linux-wlan-ng-0.2.1-pre20/src/prism2/driver/hfa384x.c
linux-wlan-ng-0.2.1-pre20/src/prism2/driver/hfa384x_usb.c
linux-wlan-ng-0.2.1-pre20/src/prism2/driver/prism2_cs.c
linux-wlan-ng-0.2.1-pre20/src/prism2/driver/prism2_pci.c
linux-wlan-ng-0.2.1-pre20/src/prism2/driver/prism2_plx.c
linux-wlan-ng-0.2.1-pre20/src/prism2/driver/prism2_usb.c
linux-wlan-ng-0.2.1-pre20/src/prism2/driver/prism2mgmt.c
linux-wlan-ng-0.2.1-pre20/src/prism2/driver/prism2mib.c
linux-wlan-ng-0.2.1-pre20/src/prism2/driver/prism2sta.c
linux-wlan-ng-0.2.1-pre20/src/prism2/include/
linux-wlan-ng-0.2.1-pre20/src/prism2/include/prism2/
linux-wlan-ng-0.2.1-pre20/src/prism2/include/prism2/hfa384x.h
linux-wlan-ng-0.2.1-pre20/src/prism2/include/prism2/prism2mgmt.h
linux-wlan-ng-0.2.1-pre20/src/prism2/ridlist/
linux-wlan-ng-0.2.1-pre20/src/prism2/ridlist/.cvsignore
linux-wlan-ng-0.2.1-pre20/src/prism2/ridlist/Makefile
linux-wlan-ng-0.2.1-pre20/src/prism2/ridlist/mkmiblist.c
linux-wlan-ng-0.2.1-pre20/src/prism2/ridlist/mkridlist.c
linux-wlan-ng-0.2.1-pre20/src/prism2/ridlist/ridlist.dat
linux-wlan-ng-0.2.1-pre20/src/shared/
linux-wlan-ng-0.2.1-pre20/src/shared/Makefile
linux-wlan-ng-0.2.1-pre20/src/shared/p80211meta.c
linux-wlan-ng-0.2.1-pre20/src/shared/p80211metamib.c
linux-wlan-ng-0.2.1-pre20/src/shared/p80211metamsg.c
linux-wlan-ng-0.2.1-pre20/src/shared/p80211types.c
linux-wlan-ng-0.2.1-pre20/src/wlancfg/
linux-wlan-ng-0.2.1-pre20/src/wlancfg/.cvsignore
linux-wlan-ng-0.2.1-pre20/src/wlancfg/Makefile
linux-wlan-ng-0.2.1-pre20/src/wlancfg/wlancfg.c
linux-wlan-ng-0.2.1-pre20/src/wlanctl/
linux-wlan-ng-0.2.1-pre20/src/wlanctl/.cvsignore
linux-wlan-ng-0.2.1-pre20/src/wlanctl/Makefile
linux-wlan-ng-0.2.1-pre20/src/wlanctl/help.c
linux-wlan-ng-0.2.1-pre20/src/wlanctl/wlanctl.c
linux-wlan-ng-0.2.1-pre20/src/wlanctl/wlanctl.h
linux-wlan-ng-0.2.1-pre20/src/wland/
linux-wlan-ng-0.2.1-pre20/src/wland/.cvsignore
linux-wlan-ng-0.2.1-pre20/src/wland/Makefile
linux-wlan-ng-0.2.1-pre20/src/wland/wland.c
BX2000:/usr/src# cd /modules/linux-wlan-ng
-bash: cd: /modules/linux-wlan-ng: No such file or directory
BX2000:/usr/src# cd modules/linux-wlan-ng
-bash: cd: modules/linux-wlan-ng: No such file or directory
BX2000:/usr/src# ls
kernel-image-2.4.26.080504_10.00.Custom_i386.deb kernel-source-2.4.26 linux-wlan-ng-0.2.1-pre20 xfree86-4.4.0-drm.tar.gz
kernel-image-2.4.26.090504+1_10.00.Custom_i386.deb kernel-source-2.4.26.tar.bz2 linux-wlan-ng-0.2.1-pre20.tar.gz
kernel-image-2.4.26.090504_10.00.Custom_i386.deb linux rpm
BX2000:/usr/src# make config
make: *** No rule to make target `config'. Stop.
BX2000:/usr/src# cd modules
-bash: cd: modules: No such file or directory
BX2000:/usr/src# cd\
> cd/
-bash: cdcd/: No such file or directory
BX2000:/usr/src# cd
BX2000:~# cd modules
-bash: cd: modules: No such file or directory
BX2000:~# ls
Desktop dead.letter index.html xfree86-4.4.0-drm-source_4.4.0-2_i386.deb xlibmesa3-4.4.0_4.4.0-2_i386.deb xserver-xfree86-4.4.0_4.4.0-2_i386.deb
BX2000:~# make config
make: *** No rule to make target `config'. Stop.
BX2000:~# cd /usr/src
BX2000:/usr/src# make config
make: *** No rule to make target `config'. Stop.
BX2000:/usr/src# ls
kernel-image-2.4.26.080504_10.00.Custom_i386.deb kernel-source-2.4.26 linux-wlan-ng-0.2.1-pre20 xfree86-4.4.0-drm.tar.gz
kernel-image-2.4.26.090504+1_10.00.Custom_i386.deb kernel-source-2.4.26.tar.bz2 linux-wlan-ng-0.2.1-pre20.tar.gz
kernel-image-2.4.26.090504_10.00.Custom_i386.deb linux rpm
BX2000:/usr/src# make config
make: *** No rule to make target `config'. Stop.
BX2000:/usr/src# make config linux-wlan-ng-0.2.1-pre20
make: *** No rule to make target `config'. Stop.
BX2000:/usr/src#


zoals ik zie is het een tamelijk zooitje, maar ja ik probeer wat ik in de handleiding vind---> zie hier
Acer Mini USB Adapter (USB-300)

As Acer told me on my request that they would not support any Linux relevant questions, I had to work it out on my own and succeeded.
Due to those circumstances, I advise any linux user not to buy any acer product.


1. Acquiring the module's sources

Goto linux-wlan.org and download at your opinion the appropriate sources.
Personally, I suggest not taking the newest but just a tick older sources. At the time of writing the linux stuff, linux-wlan-ng-0.2.1-pre16.tar.gz was newest and I made some bad experiences with it concerning debug overhead and connection loss. Furthmore, there is an error with hfa384x_usb... but it runs and that's quite enough for the moment.
2. Building the modules

At your opinion, do most or nothing as normal user.

# cd /usr/src
# tar xzvf linux-wlan-ng.tar.gz
# cd modules/linux-wlan-ng
# make config // answer most with "n", select usb, correct kernel source path
# make all
# make install // must be done as root

3. Configuring

Configure /etc/resolv.conf and add your nameserver if necessary.
Edit /etc/network/interfaces. Important for DHCP acquired IP address is the

auto wlan0
iface wlan0 inet dhcp
wireless_mode managed

In /etc/wlan/wlan.conf set the wireless device to the one you would like to use, e.g. wlan0 and uncomment if necessary the first two lines of the block at the end of file. If you know what you're doing, set your SSID, and copy /etc/wlan/wlancfg-DEFAULT to /etc/wlan/wlancfg-YourNetworkName and edit the newly created file according to your needs. Probably you will have to do nothing.
Now, check /etc/modutils/linux-wlan-ng and uncomment prism2_usb together with adding the device name you chose above. This might be
alias wlan0 prism2_usb

. Don't forget to run 'update-modules' afterwards.
4. Starting

# modprobe prism2_usb prism2_doreset=1
# wlanctl-ng wlan0 lnxreq_ifstate ifstate=enable
# wlanctl-ng wlan0 lnxreq_autojoin ssid=<your AP's SSID> authtype=opensystem
# ifconfig wlan0 <yourIP>

Alternatively, copy /usr/src/modules/linux-wlan-ng/etc/rc.wlan to an appropriate place and execute it.
Your system's hotplug scripts can also be used to do all that work.
5. Bug hunting

If your system doesn't run for now, try to load the orinoco module and follow the instructions given in /usr/src/modules/linux-wlan-ng/README.


Good Luck!


Additional sources list

www.linux-wlan.org www.hpl.hp.com/personal/Jean_Tourrilhes/Linux/ larve.net/people/hugo/2000/10/wireless-lan

[ Voor 21% gewijzigd door jp73 op 12-05-2004 11:58 ]

[Seth4Chaos]

code:

BX2000:/usr/src# cd /modules/linux-wlan-ng

komt net overeen met

code:

# cd modules/linux-wlan-ng

en daarvoor moet je nog wel even "cd linux-wlan-ng-0.2.1-pre20" typen

je moet dus naar de dir /usr/src/linux-wlan-ng-0.2.1-pre20/modules/linux-wlan-ng en niet naar de /modules/linux-wlan-ng

in die dir moet je "make config" doen

[ Voor 19% gewijzigd door Seth4Chaos op 12-05-2004 12:02 ]

[jp73]

Ja dank je

dat was mijn fout

op een gegeven ogenblik ben je zo aan het proberen dat je eigenlijk niet meer weet wat je aan het doen bent

[jp73]

ik heb nu die driver gemaakt en de handelingen uit Tim's handleiding http://mitglied.lycos.de/timshome/linux/acer.html geprobeerd te volgen.

ook de READme gepoogd te volgen,.......

heb het volgende gedaan om een rc.local file te krijgen :


cat /etc/inittab\grep initdefault

id:2:initdefault:

touch /etc/init.d/rc.local
chmod 774 /etc/init.d/rc.local

daarna update-rc.d -f rc.local start 66 2 3 4 5 .


in de rc.local staat volgend

#!/bin/sh
modprobe prism2_usb
wlanctl-ng wlan0 lnxreq_ifstate ifstate=enable
wlanctl-ng wlan0 lnxreq_autojoin ssid=Acer authtype=opensystem
iface wlan0 inet dhcp
wireless_mode managed

in /etc/wlan/wlan.conf staat

WLAN_DEVICES="wlan0"
WLAN_SCAN=n
SSID_wlan0="Acer"
ENABLE_wlan0=y

(mijn ssid=Acer)

in /etc/wlan/wlancfg-Acer
staat

#=======USER MIB SETTINGS=============================
# You can add the assignments for various MIB items
# of your choosing to this variable, separated by
# whitespace. The wlan-ng script will then set each one.
# Just uncomment the variable and set the assignments
# the way you want them.

#USER_MIBS="p2CnfRoamingMode=1 p2CnfShortPreamble=mixed"

#=======WEP===========================================
# [Dis/En]able WEP. Settings only matter if PrivacyInvoked is true
lnxreq_hostWEPEncrypt=false # true|false
lnxreq_hostWEPDecrypt=false # true|false
dot11PrivacyInvoked=false # true|false
dot11WEPDefaultKeyID=0 # 0|1|2|3
dot11ExcludeUnencrypted=true # true|false, in AP this means WEP is required.

# If PRIV_GENSTR is not empty, use PRIV_GENTSTR to generate
# keys (just a convenience)
# add-ons/ in the tarball contains other key generators.
PRIV_GENERATOR=/sbin/nwepgen # nwepgen, Neesus compatible
PRIV_KEY128=false # keylength to generate
PRIV_GENSTR=""

# or set them explicitly. Set genstr or keys, not both.
dot11WEPDefaultKey0= # format: xx:xx:xx:xx:xx or
dot11WEPDefaultKey1= # xx:xx:xx:xx:xx:xx:xx:xx:xx:xx:xx:xx:xx
dot11WEPDefaultKey2= # e.g. 01:20:03:40:05 or
dot11WEPDefaultKey3= # 01:02:03:04:05:06:07:08:09:0a:0b:0c:0d
#=======SELECT STATION MODE===================
IS_ADHOC=n # y|n, y - adhoc, n - infrastructure

#======= INFRASTRUCTURE STATION ===================
# What kind of authentication?
AuthType="opensystem" # opensystem | sharedkey (requires WEP)

#======= ADHOC STATION ============================
BCNINT=100 # Beacon interval (in Kus)
CHANNEL=6 # DS channel for BSS (1-14, depends
# on regulatory domain)
BASICRATES="2 4" # Rates for mgmt&ctl frames (in 500Kb/s)
OPRATES="2 4 11 22" # Supported rates in BSS (in 500Kb/s)


mijn /etc/network/interfaces:

# /etc/network/interfaces -- configuration file for ifup(, ifdown(

# The loopback interface
auto lo
iface lo inet loopback

# The first network card - this entry was created during the Debian installation
auto eth0
iface eth0 inet dhcp

# entry for Acer usb wlan
auto wlan0
iface wlan0 inet dhcp
wireless_mode managed


mijn accespoint/router is een Acer en staat ingesteld als dhcp server


als ik wlanctl-ng wlan0 lnxreq_ifstate ifstate=enable ingeef krijg ik

wlanctl-ng: No such device


ik heb geen idee wat er niet goed is.......

hieronder nog de output van dmesg

Linux version 2.4.26.090504+1 (root@BX2000) (gcc version 3.3.3 (Debian 20040401)) #1 Sun May 9 13:19:01 CEST 2004
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 00000000000a0000 (usable)
BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 0000000007ff0000 (usable)
BIOS-e820: 0000000007ff0000 - 0000000007ff3000 (ACPI NVS)
BIOS-e820: 0000000007ff3000 - 0000000008000000 (ACPI data)
BIOS-e820: 00000000ffff0000 - 0000000100000000 (reserved)
127MB LOWMEM available.
On node 0 totalpages: 32752
zone(0): 4096 pages.
zone(1): 28656 pages.
zone(2): 0 pages.
ACPI disabled because your bios is from 00 and too old
You can enable it with acpi=force
Kernel command line: auto BOOT_IMAGE=Linux ro root=302
Initializing CPU#0
Detected 399.931 MHz processor.
Console: colour VGA+ 80x25
Calibrating delay loop... 797.90 BogoMIPS
Memory: 126500k/131008k available (1700k kernel code, 4124k reserved, 661k data, 96k init, 0k highmem)
Dentry cache hash table entries: 16384 (order: 5, 131072 bytes)
Inode cache hash table entries: 8192 (order: 4, 65536 bytes)
Mount cache hash table entries: 512 (order: 0, 4096 bytes)
Buffer cache hash table entries: 4096 (order: 2, 16384 bytes)
Page-cache hash table entries: 32768 (order: 5, 131072 bytes)
CPU: L1 I cache: 16K, L1 D cache: 16K
CPU: L2 cache: 128K
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#0.
CPU: After generic, caps: 0183f9ff 00000000 00000000 00000000
CPU: Common caps: 0183f9ff 00000000 00000000 00000000
CPU: Intel Celeron (Mendocino) stepping 05
Enabling fast FPU save and restore... done.
Checking 'hlt' instruction... OK.
POSIX conformance testing by UNIFIX
ACPI: Subsystem revision 20040326
ACPI: Interpreter disabled.
PCI: PCI BIOS revision 2.10 entry at 0xfb250, last bus=1
PCI: Using configuration type 1
PCI: Probing PCI hardware
PCI: ACPI tables contain no PCI IRQ routing entries
PCI: Probing PCI hardware (bus 00)
PCI: Using IRQ router PIIX/ICH [8086/7110] at 00:07.0
PCI: Cannot allocate resource region 0 of device 01:00.0
PCI: Failed to allocate resource 0(e0000000-e7ffffff) for 01:00.0
Limiting direct PCI/PCI transfers.
isapnp: Scanning for PnP cards...
isapnp: No Plug & Play device found
Linux NET4.0 for Linux 2.4
Based upon Swansea University Computer Society NET3.039
Initializing RT netlink socket
apm: BIOS version 1.2 Flags 0x07 (Driver version 1.16)
Starting kswapd
Journalled Block Device driver loaded
Installing knfsd (copyright (C) 1996 [e-mail]).
Detected PS/2 Mouse Port.
pty: 256 Unix98 ptys configured
Serial driver version 5.05c (2001-07-08) with MANY_PORTS SHARE_IRQ SERIAL_PCI ISAPNP enabled
ttyS00 at 0x03f8 (irq = 4) is a 16550A
ttyS01 at 0x02f8 (irq = 3) is a 16550A
Floppy drive(s): fd0 is 1.44M
keyboard: Timeout - AT keyboard not present?(ed)
keyboard: Timeout - AT keyboard not present?(f4)
FDC 0 is a post-1991 82077
8139too Fast Ethernet driver 0.9.26
PCI: Found IRQ 11 for device 00:08.0
eth0: RealTek RTL8139 at 0xc8800000, 00:10:a7:01:42:4e, IRQ 11
eth0: Identified 8139 chip type 'RTL-8139B'
Linux agpgart interface v0.99 (c) Jeff Hartmann
agpgart: Maximum main memory to use for agp memory: 94M
agpgart: Detected Intel 440BX chipset
agpgart: AGP aperture is 64M @ 0xe8000000
Uniform Multi-Platform E-IDE driver Revision: 7.00beta4-2.4
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
PIIX4: IDE controller at PCI slot 00:07.1
PIIX4: chipset revision 1
PIIX4: not 100% native mode: will probe irqs later
ide0: BM-DMA at 0xf000-0xf007, BIOS settings: hda:DMA, hdb:DMA
ide1: BM-DMA at 0xf008-0xf00f, BIOS settings: hdc:DMA, hdd:DMA
hda: WDC WD800BB-00DKA0, ATA DISK drive
blk: queue c0391f40, I/O limit 4095Mb (mask 0xffffffff)
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
hda: attached ide-disk driver.
hda: 156301488 sectors (80026 MB) w/2048KiB Cache, CHS=9729/255/63, UDMA(33)
Partition check:
hda: hda1 hda2 hda3
SCSI subsystem driver Revision: 1.00
PCI: Found IRQ 10 for device 00:0b.0
ahc_pci:0:11:0: Host Adapter Bios disabled. Using default SCSI device parameters
scsi0 : Adaptec AIC7XXX EISA/VLB/PCI SCSI HBA DRIVER, Rev 6.2.36
<Adaptec 2902/04/10/15/20C/30C SCSI adapter>
aic7850: Single Channel A, SCSI Id=7, 3/253 SCBs

(scsi0:A:3): 10.000MB/s transfers (10.000MHz, offset 15)
Vendor: PLEXTOR Model: CD-ROM PX-40TS Rev: 1.13
Type: CD-ROM ANSI SCSI revision: 02
Attached scsi CD-ROM sr0 at scsi0, channel 0, id 3, lun 0
sr0: scsi-1 drive
Uniform CD-ROM driver Revision: 3.12
usb.c: registered new driver hub
host/uhci.c: USB Universal Host Controller Interface driver v1.1
host/uhci.c: USB UHCI at I/O 0xe000, IRQ 10
usb.c: new USB bus registered, assigned bus number 1
hub.c: USB hub found
hub.c: 2 ports detected
usb.c: registered new driver hid
hid-core.c: v1.8.1 Andreas Gal, Vojtech Pavlik <[e-mail]>
hid-core.c: USB HID support drivers
Initializing USB Mass Storage driver...
usb.c: registered new driver usb-storage
USB Mass Storage support registered.
NET4: Linux TCP/IP 1.0 for NET4.0
IP: routing cache hash table of 512 buckets, 4Kbytes
TCP: Hash tables configured (established 8192 bind 16384)
Linux IP multicast router 0.06 plus PIM-SM
NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
reiserfs: found format "3.6" with standard journal
reiserfs: checking transaction log (device ide0(3,2)) ...
for (ide0(3,2))
ide0(3,2):Using r5 hash to sort names
VFS: Mounted root (reiserfs filesystem) readonly.
Freeing unused kernel memory: 96k freed
hub.c: new USB device 00:07.2-1, assigned address 2
Adding Swap: 128484k swap-space (priority -1)
reiserfs: found format "3.6" with standard journal
usb_control/bulk_msg: timeout
usb.c: USB device not accepting new address=2 (error=-110)
hub.c: new USB device 00:07.2-1, assigned address 3
reiserfs: checking transaction log (device ide0(3,3)) ...
for (ide0(3,3))
ide0(3,3):Using r5 hash to sort names
eth0: link up, 100Mbps, full-duplex, lpa 0x45E1
usb_control/bulk_msg: timeout
usb.c: USB device not accepting new address=3 (error=-110)
prism2usb_init: prism2_usb.o: 0.2.1-pre20 Loaded
prism2usb_init: dev_info is: prism2_usb
usb.c: registered new driver prism2_usb
BX2000:~#


als jullie nog meer info nodig hebben hoor ik het wel......

[Jimbolino]

hallo hallo, het is hier niet "het grote-post-je-screen-output-topic"

is er geen binairy (.rpm) package beschikbaar? daarmee bespaar je jezelf veel elende