[WIN2KAS] unattended vraagje

[Verwijderd]

Hallo,

Ik moet een klasje MCSA klaar zetten.
Nu ben ik vastgelopen met het installeeren van de Instructor PC.
Er staan een unattended filetje speciaal gemaakt voor die pc.
Nou heb ik smartdrive enzo geladen en de bestanden zijn gekopieert, waarna hij opnieuw opstart en zoekt naar een dhcp server (die hij vind), maar wat eigenlijk niet hoort want dat hoort hij zelf te worden.
Na het zoeken van de DHCP zoekt hij naar een TFTP server. DIe hij niet vind want dat bestaat niet en hoort ook helemaal niet te bestaan.
Omdat hij die dan niet kan vinden springt hij naar de dos prompt en doet geen moer meer.
Ik kan ook niet uitzetten dat hij niet moet zoeken naar een tftp server.

Ik hoop dat iemand weet wat ik moet doen want ik heb alles bijna al geprobeert wat ik weet.

BVD,

Michel

[Verwijderd]

Verwijderd schreef op 10 mei 2004 @ 09:28:
Lang verhaal

Je zegt heel veel maar toch weer heel weinig
Heb je de code van het unattended file'tje

[Verwijderd]

zoek nog ff naar unattend.txt het staat namelijk op een andere lokatie als het goed is.

Dit is het batchfiletje wat ik moet runnen:

code:

@echo off

rem MOC Classrom Configuration v1.0
set mocversion=1.0

rem *********************************************************************************
rem COPYRIGHT: Lonset.bat and all dependent files are copyright Microsoft

rem VERSION: 1.0

rem PURPOSE: This batch file:
rem    * Prompts you for the classroom number to use for LONDON
rem    * Copies classroom setup files and course lab files to \SETUP, \MOC
rem    * Copies Windows 2000 Advanced Server files to \winsrc\i386
rem    * Installs and configures the LONDON Instructor computer (192.168.x.200)
rem          It calls lonset1 (from the local hd because compact discs might
rem          be changed) to copy Windows 2000 Advanced Server files to the local
rem          hard drive and then installs Windows 2000 Advanced Server on the computer

rem    * Other switches
rem      - /? shows syntax

rem TESTING: To output all script info to a debug file, add the /debug parameter
rem          Example: lonset /debug d: 2

rem LOCALIZATION: Strings used by this batch file are in \setup\text\lonset
rem               Common strings are in \setup\text
rem               Exceptions - Determine Drive procedure, Syntax Procedure

rem DEPENDENCIES: This assumes the xcopy command is available
rem               Calls c:\Setup\lonset1.bat (2nd half of this setup)
rem               when the trainer CD is removed and Windows 2000 cd is inserted

rem PARAMETERS: 
rem             2=destination - is used to specify dest for data drive (default is C:)
rem             3=classroom - is used to specify the classroom (default=prompt user)
rem **********************************************************************************

if "%1"=="/?" goto syntax

set debugfile=nul
if "%1"=="/debug" set debugfile=c:\lonset.log
if "%1"=="/debug" if exist c:\lonset.log del c:\lonset.log > nul

rem *****************************************************************************
rem Detect CDROM drive
rem *****************************************************************************

rem User must run drive:\setup\lonset
set source=
for %%j in (a b c d e f g h i j k l m n o p q r s t u v w x y z) do if %%j:\setup\lonset==%0 set source=%%j:
for %%j in (a b c d e f g h i j k l m n o p q r s t u v w x y z) do if %%j:\setup\lonset.bat==%0 set source=%%j:
for %%j in (A B C D E F G H I J K L M N O P Q R S T U V W X Y Z) do if %%j:\setup\lonset.bat==%0 set source=%%j:
for %%j in (A B C D E F G H I J K L M N O P Q R S T U V W X Y Z) do if %%j:\setup\lonset==%0 set source=%%j:
if not .%source% == . goto drivedone

cls
rem !!!LOCALIZE this text
echo You must type in the full path to lonset.bat including the drive letter.
echo.
echo Example - e:\setup\lonset
echo. 
goto end

:drivedone
rem Store drive information in log file
echo %source% >> %debugfile%

if %source%==C: if .%1==. goto syntax
if %source%==c: if .%1==. goto syntax


rem *****************************************************************************
rem Set variables from passed in parameters
rem *****************************************************************************

rem This is done after CDROM detection because /debug will cause a shift of the params
if "%1"=="/debug" shift

set os=Windows_2000_Advanced_Server
if "%1" =="/proinstall" set os=Windows_2000_Professional

rem If not installing LONDON, make sure c:\setup exists, then call lonset1 to install Pro
if not %os%==Windows_2000_Advanced_Server if not exist c:\setup\nul xcopy %source%\setup C:\setup\*.* /e >> %debugfile%
if not %os%==Windows_2000_Advanced_Server if not .%2==. set source=%2
if not %os%==Windows_2000_Advanced_Server c:\setup\instruct\lonset1.bat 

set destination=%1
set classroom=%2
if .%destination% == . set destination=C:

rem Run without pause if all parameters specified
set pauseyn=YES
if not .%2 == . set pauseyn=NO


rem *****************************************************************************
rem Display welcome page
rem *****************************************************************************

rem Skip welcome and classroom prompt if not pausing
if %pauseyn%==NO goto classdone

cls
type %source%\setup\text\bigtitle.txt
pause

cls
type %source%\setup\text\moctitle.txt
type %source%\setup\text\moctitle.txt >> %debugfile%
type %source%\setup\text\lonset\LonInstr.txt
type %source%\setup\text\lonset\LonInstr.txt >> %debugfile%
pause

rem *****************************************************************************
rem Determine the classroom being installed
rem *****************************************************************************

cls
type %source%\setup\text\moctitle.txt
type %source%\setup\text\moctitle.txt >> %debugfile%
type %source%\setup\text\getclass.txt
type %source%\setup\text\getclass.txt >> %debugfile%

%source%\setup\choice /c:123456789
for %%j in (0 1 2 3 4 5 6 7 8 9 10) do if errorlevel %%j set classroom=%%j
if %classroom%==0 goto error
if %classroom%==10 goto error

:classdone
rem Store classroom choice in debug file
echo %classroom% >> %debugfile%


rem *****************************************************************************
rem Copy MOC courseware setup files to C:\SETUP
rem Copy course lab files to C:\MOC
rem *****************************************************************************

cls
type %source%\setup\text\moctitle.txt
type %source%\setup\text\moctitle.txt >> %debugfile%
type %source%\setup\text\lonset\copyset.txt
type %source%\setup\text\lonset\copyset.txt >> %debugfile%

xcopy %source%\setup C:\setup\*.* /e >> %debugfile%
if not exist c:\setup\nul goto cerror
if exist %source%\moc xcopy %source%\moc C:\moc\*.* /e >> %debugfile%

cls
type %source%\setup\text\moctitle.txt
type %source%\setup\text\lonset\copyset2.txt
type %source%\setup\text\lonset\copyset2.txt >> %debugfile%



xcopy %source%\tools\*.* C:\tools\*.* /e >> %debugfile%
xcopy %source%\pptview\*.* C:\pptview\*.* /e >> %debugfile%

rem Append the string "set mocversion=x" to mocver.bat for possible use later
type %source%\setup\text\lonset\setver.txt >> C:\setup\mocver.bat
type %source%\setup\text\lonset\setver.txt >> %debugfile%
echo %mocversion% >> C:\setup\mocver.bat
echo %mocversion% >> %debugfile%


echo %source% > c:\params.txt
echo %destination% >> c:\params.txt
echo %classroom% >> c:\params.txt
echo %debugfile% >> c:\params.txt



if %classroom%==1 copy c:\tools\dhcp\dhcp1.txt c:\tools\setdhcp.cmd
if %classroom%==2 copy c:\tools\dhcp\dhcp2.txt c:\tools\setdhcp.cmd
if %classroom%==3 copy c:\tools\dhcp\dhcp3.txt c:\tools\setdhcp.cmd
if %classroom%==4 copy c:\tools\dhcp\dhcp4.txt c:\tools\setdhcp.cmd
if %classroom%==5 copy c:\tools\dhcp\dhcp5.txt c:\tools\setdhcp.cmd
if %classroom%==6 copy c:\tools\dhcp\dhcp6.txt c:\tools\setdhcp.cmd
if %classroom%==7 copy c:\tools\dhcp\dhcp7.txt c:\tools\setdhcp.cmd
if %classroom%==8 copy c:\tools\dhcp\dhcp8.txt c:\tools\setdhcp.cmd
if %classroom%==9 copy c:\tools\dhcp\dhcp9.txt c:\tools\setdhcp.cmd

cls
type %source%\setup\text\moctitle.txt
type c:\setup\text\lonset\filecom.txt
type c:\setup\text\lonset\filecom.txt >> %debugfile%



rem Don't pause if at least MOC drive and classroom are specified
if %pauseyn% == YES pause

rem Call lonset1.bat on c:\ because we might be swapping CD's
rem These environment variables are all available in lonset1: 
rem %source% %destination% %classroom% %pauseyn%

call c:\setup\instruct\lonset1.bat 
goto end

rem *********************************************************************
rem Syntax routine
rem *********************************************************************

:syntax
cls
%source%\setup\ccc
rem !!!LOCALIZE this text
echo Lonset.bat Syntax
echo -----------------
echo.
echo The following command line parameters are available:
echo.
echo     %%1 = Destination drive for course data files (default is C:)
echo     %%2 = Classroom number 1-254  (default is to prompt you for this number)
echo. 
echo     Example: e:\setup\lonset d: 4
echo.
echo Important: If you run lonset.bat from the C:\SETUP directory, it assumes
echo London is installed and you are adding Windows 2000.
echo.
goto end

rem *********************************************************************
rem Selection Error routine
rem *********************************************************************

:error
rem This section is specified in the event the user circumvents the CHOICE command. 
rem This routine is also called if a bad command line parameter is encountered

cls
type %source%\setup\text\moctitle.txt
type %source%\setup\text\lonset\badsel.txt
goto end

rem *********************************************************************
rem CDrive Error routine
rem *********************************************************************

:cerror
rem This is called if files could not be copied to the C drive (not formatted, 
rem or no xcopy command)

cls
type %source%\setup\text\moctitle.txt
type %source%\setup\text\lonset\baddrv.txt

:end

[Verwijderd]

ik hoop dat je hier wat mee kan