hallo mensen,
Mijn vorige topic ging dicht omdat ik zelf te weinig deed. Nou heb ik gezogt en gezocht en kwam ik uit op de volgende dingen:
ATI Cards:
Download the BIOS file (ATI Bios collection here) and put it on a bootable floppy/usb stick/CD. Check bootdisk.com on how to get a boot disk.
Download an ATI flashing utility and put it on this disk too.

Reboot your computer with the boot disk and run atiflash -s 0 oldbios.bin to save your old bios just in case you might need it at a later time.
Now run atiflash -p 0 newbios.bin Replace newbios.bin with the filename of the downloaded bios file.
If you are trying to flash a bios for a different card then you will get a security warning that the bios does not match your card. If you are absolutely sure that the bios is compatible you can use the -f parameter to force flashing. For example atiflash -f -p 0 bios.bin
Reboot your computer
Done
Zou iemand zo vrij willen zijn om dit even voor mij te vertalen? Want ik doe liever niets fout door mijn slechte engels. Bij voorbaat dank!
Nou heb ik verder de file van deze site gedownload:http://softmod.ocfaq.com/bios.php
daar heb ik de flash voor de volgende kaart gedownload: PowerColor 9200 SE 64 MB
ook heb ik ati flash v 1.6 gedownload. Alleen nou loop ik vast want nu snap ik er niets meer van.
Nou heb ik nog een vraag. Wat verandert deze bios nou eigenlijk aan mijn kaart?
Verandert deze kaart eigenlijk wel iets?
Mijn vorige topic ging dicht omdat ik zelf te weinig deed. Nou heb ik gezogt en gezocht en kwam ik uit op de volgende dingen:
ATI Cards:
Download the BIOS file (ATI Bios collection here) and put it on a bootable floppy/usb stick/CD. Check bootdisk.com on how to get a boot disk.
Download an ATI flashing utility and put it on this disk too.

Reboot your computer with the boot disk and run atiflash -s 0 oldbios.bin to save your old bios just in case you might need it at a later time.
Now run atiflash -p 0 newbios.bin Replace newbios.bin with the filename of the downloaded bios file.
If you are trying to flash a bios for a different card then you will get a security warning that the bios does not match your card. If you are absolutely sure that the bios is compatible you can use the -f parameter to force flashing. For example atiflash -f -p 0 bios.bin
Reboot your computer
Done
Zou iemand zo vrij willen zijn om dit even voor mij te vertalen? Want ik doe liever niets fout door mijn slechte engels. Bij voorbaat dank!
Nou heb ik verder de file van deze site gedownload:http://softmod.ocfaq.com/bios.php
daar heb ik de flash voor de volgende kaart gedownload: PowerColor 9200 SE 64 MB
ook heb ik ati flash v 1.6 gedownload. Alleen nou loop ik vast want nu snap ik er niets meer van.
Nou heb ik nog een vraag. Wat verandert deze bios nou eigenlijk aan mijn kaart?
Verandert deze kaart eigenlijk wel iets?