GEEN OGR...!! WEL RC5 }:O

[procyon]

ik heb mijn ini's aangepast zodat ze straks als rc5 afgelopen is, (je weet nooit) ze verdergaan met ogr..

MAAR dat doen ze nu al..!! en dat is niet de bedoeling,

wat is er fout? dit zijn mijn ini's

pproxy:
[KeyServer]
ipaddress=proxy.dsmarty.com
port=2064
connectperiod=600
connectivity=normal
;bindip= ; IP to talk out to keyserver from
;uuehttpmode=0
; 0=normal,1=uue,2=http,3=http+uue
; 4=socks4,5=socks5,6=genproxy,7=genproxy+uue
;httpproxy=bve_nt2
;httpport=5000
;httpid=

[ports]
;listenaddress= ; IP to accept clients on
port=2064
;port2=23 ; must be root for ports < 1000
;port3=80
testport=3064
timeout=30

[console]
logfileconsole=
logfileconsolerotation=daily
consoleverbosity="general stats keyblock server client buffers timestamp attention errlow errsevere"
timestampflags=130



[rc564]
logfilekeyblock=pproxyrc5
logfilekeyblockrotation=daily
minkeysready=10
maxkeysready=600000
minkeysdone=1
maxkeysdone=10000
expertmode=1

[misc]
proxymessage="crush anandtech"
pidfile=rc5desproxy.pid
statusperiod=30
periodicperiod=120
;logfilecompressor=logcompressor.sh

[ignoredip]

[allowedip]

[ogr]
contestclosed=0 (doet ie zelf)

[desII]
contestclosed=1

[csc]
contestclosed=1


en de koeien zelf:

[parameters]
id=[e-mail]

[misc]
project-priority=RC5,OGR,DES=0,CSC=0

[rc5]
randomprefix=243
fetch-workunit-threshold=30


[buffers]
checkpoint-filename=0
;[networking]
;nofallback=true
;autofindkeyserver=no

[networking]
autofindkeyserver=no
keyserver=bve_nt2:2064

[display]
detached=no

[triggers]
exit-flag-filename=k:\client\stopclients.txt
restart-on-config-file-change=yes
pause-watch-plist=taskmgr.exe
pause-flag-filename=k:\client\pause.txt


wat kan hier nog aan verbeterd worden..??

[AntonT]

[misc]
project-priority=RC5,OGR,DES=0,CSC=0

moet volgens mij zijn
project-priority=RC5=2,OGR=1,DES=0,CSC=0

[Verwijderd]

waarschijnlijk krijgt je client geen RC5 blocks en wel OGR stubs. je hebt namelijk staan:
[rc564]
minkeysready=10

en de client wil er 30 hebben. misschien dat je er meer moet bufferen in je proxy.

[anthonov]

En vergeet deze niet:
'Additional buffer-level checking' onder de Buffer and buffer update options op 4 zetten.

[procyon]

dank voor de snelle reacties maar mijn buffer geeft genoeg op voorraad (rc5)

fers timestamp attention errlow errsevere (3519)
[2000-12-19 13:45:21] Invalid rc564 maxready value! Setting to 200000.
[2000-12-19 13:45:21] Notice: connectivity mode is normal
[2000-12-19 13:45:21] Notice: Loaded 0 ignoredip addresses from ini file
[2000-12-19 13:45:21] Notice: Loaded 0 allowedip addresses from ini file
[2000-12-19 13:45:21] Notice: Primary listener bound to (all devices):206
[2000-12-19 13:45:21] Notice: Test listener bound to (all devices):3064
[2000-12-19 13:45:21] rc564 r=199813/200000, d=801/10000, 0.0 Mkeys/sec,
[2000-12-19 13:45:21] ogr r=45/50, d=5/20, 0.0 Mnodes/sec, tot=0 stubs
[2000-12-19 13:45:21] Status: Uptime: 0.00:00:00, 2 listeners, 0 uplinks
[2000-12-19 13:45:21] Status: 0 active clients (peak: 0, mean: 0.00)
[2000-12-19 13:45:52] rc564 r=199813/200000, d=801/10000, 0.0 Mkeys/sec,
[2000-12-19 13:45:55] ogr r=45/50, d=5/20, 0.0 Mnodes/sec, tot=0 stubs
[2000-12-19 13:45:55] Status: Uptime: 0.00:00:31, 2 listeners, 0 uplinks
[2000-12-19 13:45:55] Status: 0 active clients (peak: 0, mean: 0.00)

en anthonov
a.k.a. Baskruit, bedoelde jij IN de -config van de clients..??

Op dinsdag 19 december 2000 14:07 schreef AntonT het volgende:
[misc]
project-priority=RC5,OGR,DES=0,CSC=0

moet volgens mij zijn
project-priority=RC5=2,OGR=1,DES=0,CSC=0

ik zal ook dit proberen..