Hallo
ik wil de nieuwe ati drivers installeren (4.3) en heb dit ook al wel een aantal keren gedaan. Echter naar mijn mening is het niet goed gelukt, omdat ik nog wat problemen ondervind in Far Cry en Battlefield Vietnam. Ik lees dat meer mensen problemen hebben met bijv. Far cry, maar toch wil ik eerst de nieuwe drivers op de juiste manier installeren en dan kijken of ik nog steeds problemen heb.
Ik wil het op de volgende manier gaan doen:
Uninstallation procedure:
Before you begin to uninstall, disconnect your computer from your internet or network! If you are connected to the internet, Windows, always impertinently thinking that it knows best, may try and install whatever Radeon driver is on Windows Update. We don't want to let it do this. So, either a) turn off your modem, or b) take out your phone jack (if you're on dial-up).
Go to the Windows Control Panel, and then to Add/Remove Programs. Select for removal any ATI entries. When asked, opt not to reboot.
Get the abovementioned ATI Uninstall Utility. It is not necessary to run this program in safe mode. Double-click on it, and then press “Ok” when a popup asks you if you wish to continue.
Reboot and install the new drivers (see below).
Note: If you have any ATI demos or ATI screensavers installed, the ATI Uninstaller will ask you if you want to remove them as well in a cryptic message, “Are you sure you want to uninstall this product?” You will get as many of those messages as you have non-driver related ATI products installed. Selecting “No” will NOT have an adverse effect on the driver removal process.
Installation:
After you remove your drivers and finish rebooting, Windows will popup the Found New Hardware "Wizard." Cancel out of it; it's useless and most unhelpful. It will popup twice in total, the first for your card and the second for its secondary (TV Out). Cancel out of both – we don’t need the help of Windows to install drivers. From here, it’s very simple. Go to wherever you downloaded the ATI drivers and double click the installer package. Follow the onscreen prompts; let it do its thing, and then reboot when asked.
Mijn probleem is nu dat ik bij het rebooten niet snel genoeg kan de popup found new hardware kan cancellen, waardoor windows toch drivers installeert. Hoe kan ik dit verhelpen?????????????????
ik wil de nieuwe ati drivers installeren (4.3) en heb dit ook al wel een aantal keren gedaan. Echter naar mijn mening is het niet goed gelukt, omdat ik nog wat problemen ondervind in Far Cry en Battlefield Vietnam. Ik lees dat meer mensen problemen hebben met bijv. Far cry, maar toch wil ik eerst de nieuwe drivers op de juiste manier installeren en dan kijken of ik nog steeds problemen heb.
Ik wil het op de volgende manier gaan doen:
Uninstallation procedure:
Before you begin to uninstall, disconnect your computer from your internet or network! If you are connected to the internet, Windows, always impertinently thinking that it knows best, may try and install whatever Radeon driver is on Windows Update. We don't want to let it do this. So, either a) turn off your modem, or b) take out your phone jack (if you're on dial-up).
Go to the Windows Control Panel, and then to Add/Remove Programs. Select for removal any ATI entries. When asked, opt not to reboot.
Get the abovementioned ATI Uninstall Utility. It is not necessary to run this program in safe mode. Double-click on it, and then press “Ok” when a popup asks you if you wish to continue.
Reboot and install the new drivers (see below).
Note: If you have any ATI demos or ATI screensavers installed, the ATI Uninstaller will ask you if you want to remove them as well in a cryptic message, “Are you sure you want to uninstall this product?” You will get as many of those messages as you have non-driver related ATI products installed. Selecting “No” will NOT have an adverse effect on the driver removal process.
Installation:
After you remove your drivers and finish rebooting, Windows will popup the Found New Hardware "Wizard." Cancel out of it; it's useless and most unhelpful. It will popup twice in total, the first for your card and the second for its secondary (TV Out). Cancel out of both – we don’t need the help of Windows to install drivers. From here, it’s very simple. Go to wherever you downloaded the ATI drivers and double click the installer package. Follow the onscreen prompts; let it do its thing, and then reboot when asked.
Mijn probleem is nu dat ik bij het rebooten niet snel genoeg kan de popup found new hardware kan cancellen, waardoor windows toch drivers installeert. Hoe kan ik dit verhelpen?????????????????
/u/29332/garfava.JPG?f=community)