Toon posts:

Vraagje over een ETC L7VTA2

Pagina: 1
Acties:

Verwijderd

Topicstarter
Ik heb een vraagje over dit mobo

http://www.ecsusa.com/products/l7vta2.html

"full series of Athlon XP/ Athlon/ Duron processors"

Welke is de snelste processor die in dit mobo kan ?
Past hier een Barton processor in?

  • Laurenz
  • Registratie: Februari 2003
  • Laatst online: 22-05 17:35
Processors

462 pin Socket A supports AMD K7 processors, full series of Athlon XP/ Athlon/ Duron processors.

Chipset

VIA® KT400 (NB) & VT8235 (SB)

Dat zie je als je op dat linkje van je klikt.

Van www.via.com.tw:

"VIA Apollo KT400 takes the AMD Athlon™ XP processor to the summit of system performance with enhanced support for a DDR333 SDRAM, ultra fast AGP 8X graphics, ATA-133, USB 2.0 and an 8X V-Link chip interconnect

Building on the success of the VIA Apollo KT333, the market leading DDR333 SDRAM chipset for the AMD Athlon™ XP processor, the VIA Apollo KT400 boasts a complete set of today's cutting-edge features combined with VIA's ultra efficient memory controller technology, delivering unparalled system performance to Socket A compatible processors. Enhanced DDR333 memory support, offering 25% more memory bandwidth to the CPU than mainstream DDR266, and the fast 200/266/333MHz processor bus, unleash the full power of AMD Athlon™ XP processors, enabling stunning performance across the full spectrum of applications."


Een snelle blik in de pricewatch leert ons vervolgens dat de snelste CPU met 333Mhz FSB een Athlon XP 3000+ (2,17Ghz) is met Barton Core.
Om een Barton CPU te gebruiken zal je overigens waarschijnlijk wel een BIOS-update moeten doen, maar dat is zo gedaan :)

Zie ook dit linkje:
http://www.via.com.tw/en/apollo/kt400.jsp
Met ook nog een handige tabel waar een hoop specs van de chipset in staan.

En als je echt 100% zeker wilt zijn over de Barton-support van dit bordje kan je natuurlijk altijd even een mailtje sturen naar ECS, of VIA.

Succes ermee :)

[ Voor 4% gewijzigd door Laurenz op 04-03-2004 02:25 ]

Leave only footprints, take only memories


  • makje
  • Registratie: December 2001
  • Laatst online: 17:37

makje

Professioneel prutser

Tja, de cpu-supporttable bij ECS is inderdaad erg onoverzichtelijk en zelfs onvolledig. Echter als je de BIOS updates voor je moederbord bekijkt dan is met BIOS 1.0a support gekomen voor de Barton 2600+.

Ik vermoed dat hij de 2800+ en de 3000+ ook nog wel zal kunnen pakken, maar dat wordt door ECS niet gegarandeerd. Hoger zal waarschijnlijk niet meer gaan omdat de VIA KT400 chipset en dit moederbord geen FSB van 200Mhz ondersteunen en de kans dat een Barton 3200+ zal werken dus wel heel klein wordt....

9800x3d