linux slaagt vast

[Anoniem: 95341]

ik vind dit zeer raar , ik heb juist install gedaan , alles werkt ( heb de versie 2.4.22 kernel installed + x window system + fluxbox + gnome en die shit

nu als ik opstart laad hij automatisch x , alles is in orde maar als ik ctrl-alt-f? doe voor naar een console te gaan slaagt alles vast

weet er mischien iemand wat het probleem hier van kan zijn ?

fujitsu siemens notebook , radeon agi 320m 3d

[moto-moi]

slaagt vast ?

'Harry slaagt vast voor z'n examen'
Wat bedoel je precies ?

[RvdH]

Hmm.. misschien gebruik je een framebuffer device voor X, en die vindt het volgens mij niet altijd leuk om naar een console te switchen.

Maar je zult toch echt meer info moeten posten (XF86Config, lspci, dmesg, grafische kaart model etc)

[Anoniem: 95341]

sorry ik ben een beetje vermoeit ,

waneer x is opgestart en ik druk de C+A+F1 knop , dan kan ik juistgeteld 1 seconden nog iets intippen en dan reageerd mijn keyboard niet meer

ik ga zodadelijk xfreeconfig copieren hier

[ Voor 117% gewijzigd door Anoniem: 95341 op 29-10-2003 20:36 ]

[Ryceck]

moto-moi schreef op 29 oktober 2003 @ 20:28:
slaagt vast ?

'Harry slaagt vast voor z'n examen'
Wat bedoel je precies ?

Als je het zo formuleert slaagt ie vast niet

[ontopic]
Hebbie misschien errors in je syslogs?, krijg je on-screen errors?
doet s ff zoeken en posten hier, dan kunnen we er misschien wat mee
[/ontopic]

Anoniem: 95341 schreef op 29 October 2003 @ 20:29:
ik denk dat het aan X licht , mar als je uit X gaat , dan crachen dat vind ik maar raar

vast = ik krijg een het console scherm , maar kan niks doen
scherm = vast

NOFI maar Nederlands zat niet je je standaardpakket ofzo?...

[ Voor 51% gewijzigd door Ryceck op 29-10-2003 20:32 ]

[Anoniem: 95341]

heb een paar standart dingetjes gepakt


## BEGIN DEBCONF SECTION
# XF86Config-4 (XFree86 server configuration file) generated by dexconf, the
# Debian X Configuration tool, using values from the debconf database.
#
# Edit this file with caution, and see the XF86Config-4 manual page.
# (Type "man XF86Config-4" at the shell prompt.)
#
# If you want your changes to this file preserved by dexconf, only make changes
# before the "### BEGIN DEBCONF SECTION" line above, and/or after the
# "### END DEBCONF SECTION" line below.
#
# To change things within the debconf section, run the command:
# dpkg-reconfigure xserver-xfree86
# as root. Also see "How do I add custom sections to a dexconf-generated
# XF86Config or XF86Config-4 file?" in /usr/share/doc/xfree86-common/FAQ.gz.

Section "Files"
FontPath "unix/:7100" # local font server
# if the local font server has problems, we can fall back on these
FontPath "/usr/lib/X11/fonts/misc"
FontPath "/usr/lib/X11/fonts/cyrillic"
FontPath "/usr/lib/X11/fonts/100dpi/:unscaled"
FontPath "/usr/lib/X11/fonts/75dpi/:unscaled"
FontPath "/usr/lib/X11/fonts/Type1"
FontPath "/usr/lib/X11/fonts/Speedo"
FontPath "/usr/lib/X11/fonts/100dpi"
FontPath "/usr/lib/X11/fonts/75dpi"
EndSection

Section "Module"
Load "GLcore"
Load "bitmap"
Load "dbe"
Load "ddc"
Load "dri"
Load "extmod"
Load "freetype"
Load "glx"
Load "int10"
Load "pex5"
Load "record"
Load "speedo"
Load "type1"
Load "vbe"
Load "xie"
EndSection

Section "InputDevice"
Identifier "Generic Keyboard"
Driver "keyboard"
Option "CoreKeyboard"
Option "XkbRules" "xfree86"
Option "XkbModel" "pc104"
Option "XkbLayout" "be"
EndSection

Section "InputDevice"
Identifier "Configured Mouse"
Driver "mouse"
Option "CorePointer"
Option "Device" "/dev/psaux"
Option "Protocol" "PS/2"
Option "Emulate3Buttons" "true"
Option "ZAxisMapping" "4 5"
EndSection

Section "InputDevice"
Identifier "Generic Mouse"
Driver "mouse"
Option "SendCoreEvents" "true"
Option "Device" "/dev/input/mice"
Option "Protocol" "ImPS/2"
Option "Emulate3Buttons" "true"
Option "ZAxisMapping" "4 5"
EndSection

Section "Device"
Identifier "Generic Video Card"
Driver "vesa"
EndSection

Section "Monitor"
Identifier "Generic Monitor"
HorizSync 28-49
VertRefresh 43-72
Option "DPMS"
EndSection

Section "Screen"
Identifier "Default Screen"
Device "Generic Video Card"
Monitor "Generic Monitor"
DefaultDepth 16
SubSection "Display"
Depth 1
Modes "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 4
Modes "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 8
Modes "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 15
Modes "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 16
Modes "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 24
Modes "1024x768" "800x600" "640x480"
EndSubSection
EndSection

Section "ServerLayout"
Identifier "Default Layout"
Screen "Default Screen"
InputDevice "Generic Keyboard"
InputDevice "Configured Mouse"
InputDevice "Generic Mouse"
EndSection

Section "DRI"
Mode 0666
EndSection

### END DEBCONF SECTION

future:~# lspci
00:00.0 Host bridge: ATI Technologies Inc: Unknown device cab0 (rev 13)
00:01.0 PCI bridge: ATI Technologies Inc: Unknown device 700f (rev 01)
00:02.0 USB Controller: Acer Laboratories Inc. [ALi] M5237 USB (rev 03)
00:03.0 Modem: Acer Laboratories Inc. [ALi]: Unknown device 5457
00:04.0 IDE interface: Acer Laboratories Inc. [ALi] M5229 IDE (rev c4)
00:06.0 Bridge: Acer Laboratories Inc. [ALi] M7101 PMU
00:07.0 ISA bridge: Acer Laboratories Inc. [ALi] M1533 PCI to ISA Bridge [Aladdin IV]
00:08.0 Multimedia audio controller: Acer Laboratories Inc. [ALi] M5451 PCI South Bridge Audio (rev 02)
00:09.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL-8139 (rev 10)
00:0a.0 FireWire (IEEE 1394): VIA Technologies, Inc. OHCI Compliant IEEE 1394 Host Controller (rev 46)
00:0b.0 CardBus bridge: ENE Technology Inc: Unknown device 1420 (rev 01)
00:0b.1 CardBus bridge: ENE Technology Inc: Unknown device 1420 (rev 01)
00:0f.0 USB Controller: Acer Laboratories Inc. [ALi] M5237 USB (rev 03)
01:05.0 VGA compatible controller: ATI Technologies Inc: Unknown device 4336

[ Voor 30% gewijzigd door Anoniem: 95341 op 29-10-2003 20:51 ]

[Anoniem: 95341]

future:~# dmesg
Linux version 2.4.22 (root@future) (gcc version 2.95.4 20011002 (Debian prerelease)) #1 SMP Tue Oct 28 13:22:40 CET 2003
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009f800 (usable)
BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000d0000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 000000000def0000 (usable)
BIOS-e820: 000000000def0000 - 000000000deff000 (ACPI data)
BIOS-e820: 000000000deff000 - 000000000df00000 (ACPI NVS)
BIOS-e820: 000000000df00000 - 000000000e000000 (reserved)
BIOS-e820: 00000000fff80000 - 0000000100000000 (reserved)
222MB LOWMEM available.
On node 0 totalpages: 57072
zone(0): 4096 pages.
zone(1): 52976 pages.
zone(2): 0 pages.
Kernel command line: BOOT_IMAGE=Linux2.4.22 ro root=306
Local APIC disabled by BIOS -- reenabling.
Found and enabled local APIC!
Initializing CPU#0
Detected 1655.814 MHz processor.
Console: colour VGA+ 80x25
Calibrating delay loop... 3296.46 BogoMIPS
Memory: 222636k/228288k available (1570k kernel code, 5264k reserved, 653k data, 100k init, 0k highmem)
Dentry cache hash table entries: 32768 (order: 6, 262144 bytes)
Inode cache hash table entries: 16384 (order: 5, 131072 bytes)
Mount cache hash table entries: 512 (order: 0, 4096 bytes)
Buffer cache hash table entries: 16384 (order: 4, 65536 bytes)
Page-cache hash table entries: 65536 (order: 6, 262144 bytes)
Enabling Disabled K7/SSE Support...
CPU: CLK_CTL MSR was fff7f37f. Reprogramming to 2007f37f
CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
CPU: L2 Cache: 256K (64 bytes/line)
CPU: After generic, caps: 0383fbff c1cbfbff 00000000 00000000
CPU: Common caps: 0383fbff c1cbfbff 00000000 00000000
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Checking 'hlt' instruction... OK.
POSIX conformance testing by UNIFIX
CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
CPU: L2 Cache: 256K (64 bytes/line)
CPU: After generic, caps: 0383fbff c1cbfbff 00000000 00000000
CPU: Common caps: 0383fbff c1cbfbff 00000000 00000000
CPU0: AMD mobile AMD Athlon (tm) 2000+ stepping 01
per-CPU timeslice cutoff: 731.78 usecs.
SMP motherboard not detected.
enabled ExtINT on CPU#0
ESR value before enabling vector: 00000000
ESR value after enabling vector: 00000000
Using local APIC timer interrupts.
calibrating APIC timer ...
..... CPU clock speed is 1656.3560 MHz.
..... host bus clock speed is 265.0172 MHz.
cpu: 0, clocks: 2650172, slice: 1325086
CPU0<T0:2650160,T1:1321776,D:3298,S:1325086,C:2650172>
Waiting on wait_init_idle (map = 0x0)
All processors have done init_idle
PCI: PCI BIOS revision 2.10 entry at 0xfd85e, last bus=1
PCI: Using configuration type 1
PCI: Probing PCI hardware
PCI: Probing PCI hardware (bus 00)
PCI: Using IRQ router ALI [10b9/1533] at 00:07.0
ATI Northbridge, reserving I/O ports 0x3b0 to 0x3bb.
isapnp: Scanning for PnP cards...
isapnp: No Plug & Play device found
Linux NET4.0 for Linux 2.4
Based upon Swansea University Computer Society NET3.039
Initializing RT netlink socket
apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16)
Starting kswapd
Installing knfsd (copyright (C) 1996 [e-mail]).
NTFS driver v1.1.22 [Flags: R/O]
pty: 256 Unix98 ptys configured
Serial driver version 5.05c (2001-07-08) with MANY_PORTS SHARE_IRQ SERIAL_PCI ISAPNP enabled
ttyS00 at 0x03f8 (irq = 4) is a 16550A
PCI: Found IRQ 11 for device 00:03.0
Redundant entry in serial pci_table. Please send the output of
lspci -vv, this message (10b9,5457,1734,100a)
and the manufacturer and name of serial board or modem board
to [e-mail].
register_serial(): autoconfig failed
Floppy drive(s): fd0 is 1.44M
FDC 0 is a post-1991 82077
8139too Fast Ethernet driver 0.9.26
PCI: Found IRQ 11 for device 00:09.0
PCI: Sharing IRQ 11 with 00:0b.1
eth0: RealTek RTL8139 Fast Ethernet at 0xce800800, 00:02:3f:b1:b8:e9, IRQ 11
eth0: Identified 8139 chip type 'RTL-8139C'
Linux agpgart interface v0.99 (c) Jeff Hartmann
agpgart: Maximum main memory to use for agp memory: 175M
agpgart: unsupported bridge
agpgart: no supported devices found.
[drm] Initialized tdfx 1.0.0 20010216 on minor 0
[drm] Initialized radeon 1.1.1 20010405 on minor 1
[drm:drm_init] *ERROR* Cannot initialize the agpgart module.
Uniform Multi-Platform E-IDE driver Revision: 7.00beta4-2.4
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
hda: FUJITSU MHR2030AT, ATA DISK drive
hdc: QSI CD-RW/DVD-ROM SBW-161, ATAPI CD/DVD-ROM drive
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
ide1 at 0x170-0x177,0x376 on irq 15
hda: attached ide-disk driver.
hda: host protected area => 1
hda: 58605120 sectors (30006 MB) w/2048KiB Cache, CHS=3648/255/63
hdc: attached ide-cdrom driver.
hdc: ATAPI 24X DVD-ROM CD-R/RW drive, 2048kB Cache
Uniform CD-ROM driver Revision: 3.12
Partition check:
hda: hda1 hda2 < hda5 hda6 hda7 >
Linux Kernel Card Services 3.1.22
options: [pci] [cardbus] [pm]
PCI: Found IRQ 11 for device 00:0b.0
PCI: Found IRQ 11 for device 00:0b.1
PCI: Sharing IRQ 11 with 00:09.0
usb.c: registered new driver hub
Yenta IRQ list 0000, PCI irq11
Socket status: 30000006
Yenta IRQ list 0000, PCI irq11
Socket status: 30000006
host/uhci.c: USB Universal Host Controller Interface driver v1.1
Linux video capture interface: v1.00
pktgen.c: v1.2: Packet Generator for packet performance testing.
NET4: Linux TCP/IP 1.0 for NET4.0
IP Protocols: ICMP, UDP, TCP, IGMP
IP: routing cache hash table of 2048 buckets, 16Kbytes
TCP: Hash tables configured (established 16384 bind 16384)
NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
VFS: Mounted root (ext2 filesystem) readonly.
Freeing unused kernel memory: 100k freed
spurious 8259A interrupt: IRQ7.
Adding Swap: 586332k swap-space (priority -1)
eth0: Setting 100mbps full-duplex based on auto-negotiated partner ability 45e1.
eth0: Setting 100mbps full-duplex based on auto-negotiated partner ability 45e1.

[weijl]

welke distro draai je psies?
draai je stable/unstable?
welke xfree draai je?
welke videokaart heb je?

need more info..

[ Voor 6% gewijzigd door weijl op 29-10-2003 21:11 ]

[moto-moi]

Inderdaad, dit topic gaat nergens over

DarkRaiN, doe ons een plezier, en lees eens goed de NOS policy - updated 01/04/03 door, want ik geloof nooit dat je erg je best hebt gedaan op je startposting..
Probeer bij een eventueel nieuw topic eens goed te letten om je taalgebruik, want als ik wil puzzelen, dan koop ik wel zo'n denksport boekje

dicht.