[Voeding] Q-Tec 550 Watt aansluitingen

[Verwijderd]

Weet iemand hoeveel aansluitingen en welke aansluitingen deze voeding heeft, op de website van Q-tec kon ik hierover niets vinden.

[Scighera]

1 ATX
1 P4
2 FDD
6 Molex/IDE

[Yokozuna]

Er is een speciaal topic voor deze populaire voeding

Q-tec 550Watt Dual-Fan voeding ervaringen topic

Maar Scighera heeft gelijk:

Looking at the leads in the PSU I found it had 6 standard Molex/IDE connectors instead of the 4 I was used to with my generic PSU, this was a good advantage as it removed some power splitters and therefore freed up some space within my case for better airflow. It also contains 2 floppy connectors which is good for me, one for my Floppy drive and one for my Radeon 9700 pro, which needs its own power supply. The PSU also has and ATX and P4 Connector . This PSU is the only one I have used which tried to minimize on clutter, with a smaller motherboard cable it easily connects to the motherboard with less clutter than the generic PSU's over-sized cables, the Molex connectors are just the right size to reach my hard drives / CD drives / Floppy drives and I used one power splitter to extend the lead to reach a fan in the bottom corner of my case. The extra Molex coming off the power splitter was needed as the PSU supplied enough connectors for all my hardware.

Bron: http://www.equilla.co.uk/review_dual_fan_gold.htm

[ Voor 87% gewijzigd door Yokozuna op 02-07-2003 13:48 ]