Ik heb een Maxtor DiamondMax 9 Plus ata133 8mb cache,
Ik laat net even Aida32 op hem los en die zegt dat hij op UDMA 2 werkt, ata33 dus, en ik kijk in mijn instellingen en zie ook UDMA 2 staan, dit terwijl hij UDMA 6 ondersteunt en het moederbord ata100 UDMA 5.. Ik heb hem daarom maar even snel getest met Sisoft Sandra en die gaf deze resultaten. :
SiSoftware Sandra
Test Status
SMP Test : No
Total Test Threads : 1
SMT Test : No
Dynamic MP/MT Load Balance : No
Processor Affinity : No
Windows Disk Cache Used : No
Use Overlapped I/O : Yes
IO Queue Depth : 8 request(s)
Test File Size : 511MB
File Server Optimised : No
Benchmark Breakdown
Buffered Read : 28 MB/s
Sequential Read : 16 MB/s
Random Read : 5 MB/s
Buffered Write : 30 MB/s
Sequential Write : 23 MB/s
Random Write : 9 MB/s
Average Access Time : 9 ms (estimated)
Drive
Drive Type : Hard Disk
Total Size : 114.5GB
Free Space : 75.3GB, 66%
Performance Tips
Notice 5008 : To change benchmarks, click Options.
Notice 5004 : Synthetic benchmark. May not tally with 'real-life' performance.
Notice 5006 : Only compare the results with ones obtained using the same version!
Tip 5202 : Use cache on to measure Windows performance.
Tip 2 : Double-click tip or press Enter while a tip is selected for more information about the tip.
Aida32 info
EIDE Apparaat-eigenschappen
Model ID Maxtor 6Y120P0
Serienummer Y41HJTHE
Revisie YAR41BW0
Parameters 238216 cylinders, 16 koppen, 63 sectoren per track, 512 bytes per sector
LBA Sectoren 240121728
Buffer 7936 KB (Dual Ported, Read Ahead)
Meervoudige Sectoren 16
ECC Bytes 57
Maximale PIO Overdrachtmodus PIO 4
Maximale UDMA Overdrachtmodus UDMA 6 (ATA-133)
Actieve UDMA Overdrachtmodus UDMA 2 (ATA-33)
Ongeformatteerde Capaciteit 117247 MB
EIDE Apparaat Eigenschappen
SMART Ondersteund
Beveiligingsmodus Ondersteund
Energiebeheer Ondersteund
Advanced Power Managment(APM) Ondersteund
Schrijfcache Ondersteund
Host Protected Area Ondersteund
Power-Up In Standby Niet ondersteund
Automatic Acoustic Management Ondersteund
48-bit LBA Niet ondersteund
Device Configuration Overlay Ondersteund
Technische Informatie EIDE Apparaat
Fabrikant Maxtor
Harde Schijf Familie DiamondMax Plus 9
Groottefactor(Form Factor) 3.5"
Capaciteit Geformatteerd 120 GB
Schijven 2
Opnameopervlaktes 3
Fysieke Afmetingen 146.1 x 101.6 x 26.1 mm
Totaal Gewicht 630 g
Gemiddelde Rotatie Toegangssnelheid 4.17 ms
Rotatiesnelheid 7200 RPM
Interface Ultra-ATA/133
Buffer naar Host Datadoorvoersnelheid 133 MB/s
Buffergrootte 8 MB
EIDE-Apparaatfabrikant
Firmanaam Maxtor Corporation
Productinformatie http://www.maxtor.com/en/products/
Dit is _erg_ laag, wat kan ik er aan doen ?? ik kan alleen kiezen tussen PIO mode of UDMA 2
Heb gelijk me RAID array op performance getest :
SiSoftware Sandra
Test Status
SMP Test : No
Total Test Threads : 1
SMT Test : No
Dynamic MP/MT Load Balance : No
Processor Affinity : No
Windows Disk Cache Used : No
Use Overlapped I/O : Yes
IO Queue Depth : 8 request(s)
Test File Size : 511MB
File Server Optimised : No
Benchmark Breakdown
Buffered Read : 82 MB/s
Sequential Read : 71 MB/s
Random Read : 8 MB/s
Buffered Write : 56 MB/s
Sequential Write : 51 MB/s
Random Write : 13 MB/s
Average Access Time : 7 ms (estimated)
Drive
Drive Type : Hard Disk
Total Size : 111.8GB
Free Space : 110.0GB, 98%
Performance Tips
Notice 5008 : To change benchmarks, click Options.
Notice 5004 : Synthetic benchmark. May not tally with 'real-life' performance.
Notice 5006 : Only compare the results with ones obtained using the same version!
Tip 5202 : Use cache on to measure Windows performance.
Tip 2 : Double-click tip or press Enter while a tip is selected for more information about the tip.
Die laat gelijk een heel ander beeld zien.... maar nog steeds mijn primary HD is te traag...
Spec's systeem
Asus p4t533-c
512 Rimm pc1066
raid partitie op promise tx2000
Maxtor Diamond plus 9 {schijf waar het om gaat}
Ik laat net even Aida32 op hem los en die zegt dat hij op UDMA 2 werkt, ata33 dus, en ik kijk in mijn instellingen en zie ook UDMA 2 staan, dit terwijl hij UDMA 6 ondersteunt en het moederbord ata100 UDMA 5.. Ik heb hem daarom maar even snel getest met Sisoft Sandra en die gaf deze resultaten. :
SiSoftware Sandra
Test Status
SMP Test : No
Total Test Threads : 1
SMT Test : No
Dynamic MP/MT Load Balance : No
Processor Affinity : No
Windows Disk Cache Used : No
Use Overlapped I/O : Yes
IO Queue Depth : 8 request(s)
Test File Size : 511MB
File Server Optimised : No
Benchmark Breakdown
Buffered Read : 28 MB/s
Sequential Read : 16 MB/s
Random Read : 5 MB/s
Buffered Write : 30 MB/s
Sequential Write : 23 MB/s
Random Write : 9 MB/s
Average Access Time : 9 ms (estimated)
Drive
Drive Type : Hard Disk
Total Size : 114.5GB
Free Space : 75.3GB, 66%
Performance Tips
Notice 5008 : To change benchmarks, click Options.
Notice 5004 : Synthetic benchmark. May not tally with 'real-life' performance.
Notice 5006 : Only compare the results with ones obtained using the same version!
Tip 5202 : Use cache on to measure Windows performance.
Tip 2 : Double-click tip or press Enter while a tip is selected for more information about the tip.
Aida32 info
EIDE Apparaat-eigenschappen
Model ID Maxtor 6Y120P0
Serienummer Y41HJTHE
Revisie YAR41BW0
Parameters 238216 cylinders, 16 koppen, 63 sectoren per track, 512 bytes per sector
LBA Sectoren 240121728
Buffer 7936 KB (Dual Ported, Read Ahead)
Meervoudige Sectoren 16
ECC Bytes 57
Maximale PIO Overdrachtmodus PIO 4
Maximale UDMA Overdrachtmodus UDMA 6 (ATA-133)
Actieve UDMA Overdrachtmodus UDMA 2 (ATA-33)
Ongeformatteerde Capaciteit 117247 MB
EIDE Apparaat Eigenschappen
SMART Ondersteund
Beveiligingsmodus Ondersteund
Energiebeheer Ondersteund
Advanced Power Managment(APM) Ondersteund
Schrijfcache Ondersteund
Host Protected Area Ondersteund
Power-Up In Standby Niet ondersteund
Automatic Acoustic Management Ondersteund
48-bit LBA Niet ondersteund
Device Configuration Overlay Ondersteund
Technische Informatie EIDE Apparaat
Fabrikant Maxtor
Harde Schijf Familie DiamondMax Plus 9
Groottefactor(Form Factor) 3.5"
Capaciteit Geformatteerd 120 GB
Schijven 2
Opnameopervlaktes 3
Fysieke Afmetingen 146.1 x 101.6 x 26.1 mm
Totaal Gewicht 630 g
Gemiddelde Rotatie Toegangssnelheid 4.17 ms
Rotatiesnelheid 7200 RPM
Interface Ultra-ATA/133
Buffer naar Host Datadoorvoersnelheid 133 MB/s
Buffergrootte 8 MB
EIDE-Apparaatfabrikant
Firmanaam Maxtor Corporation
Productinformatie http://www.maxtor.com/en/products/
Dit is _erg_ laag, wat kan ik er aan doen ?? ik kan alleen kiezen tussen PIO mode of UDMA 2
Heb gelijk me RAID array op performance getest :
SiSoftware Sandra
Test Status
SMP Test : No
Total Test Threads : 1
SMT Test : No
Dynamic MP/MT Load Balance : No
Processor Affinity : No
Windows Disk Cache Used : No
Use Overlapped I/O : Yes
IO Queue Depth : 8 request(s)
Test File Size : 511MB
File Server Optimised : No
Benchmark Breakdown
Buffered Read : 82 MB/s
Sequential Read : 71 MB/s
Random Read : 8 MB/s
Buffered Write : 56 MB/s
Sequential Write : 51 MB/s
Random Write : 13 MB/s
Average Access Time : 7 ms (estimated)
Drive
Drive Type : Hard Disk
Total Size : 111.8GB
Free Space : 110.0GB, 98%
Performance Tips
Notice 5008 : To change benchmarks, click Options.
Notice 5004 : Synthetic benchmark. May not tally with 'real-life' performance.
Notice 5006 : Only compare the results with ones obtained using the same version!
Tip 5202 : Use cache on to measure Windows performance.
Tip 2 : Double-click tip or press Enter while a tip is selected for more information about the tip.
Die laat gelijk een heel ander beeld zien.... maar nog steeds mijn primary HD is te traag...
Spec's systeem
Asus p4t533-c
512 Rimm pc1066
raid partitie op promise tx2000
Maxtor Diamond plus 9 {schijf waar het om gaat}
[ Voor 49% gewijzigd door Verwijderd op 30-04-2003 18:29 . Reden: meer informatie ]