Tijdens het rondklikken op de instellingen van mijn ADSL modem/router kwam ik de termen "SNR Margin" en "Line Attenuation" tegen. GoT geeft hier niet erg veel info over, dus hier ff een definitie.
SNR (Signal to Noise) Margin: Measures the relative strength of the ADSL signal compared to background noise. Thus, the higher the reading the better. Alcatel specifications indicate that the minimum SNR required to maintain sync is 6dB (decibels).
Attenuation: Measures how much the signal has degraded as it travels from the DSLAM to the modem and vice-versa. In this case, the lower the number, the better. Usually the maximum attenuation that can occur and still have a readable signal is about 60-65dB.
Nu ben ik benieuwd naar jullie specs, gewoon om te zien of er veel verschil is in lijn kwaliteit en zo ja, uitvinden waar dat in zit (zal wel vooral afstand tot centrale zijn). Als aftrap hier mijn specs:
Abo: Zon Breedband Family (512 / 128)
Modem: E-Tech ADSL Modem met ingebouwde 4p router
Telefoonlijn: analoog
SNR Margin (dB's): 35.3 / 20.0
Line Attenuation (dB's): 10.1 / 13.5
Voor de duidelijkheid: de verschillende waarden zijn dus voor downstream en upstream, respectievelijk
SNR (Signal to Noise) Margin: Measures the relative strength of the ADSL signal compared to background noise. Thus, the higher the reading the better. Alcatel specifications indicate that the minimum SNR required to maintain sync is 6dB (decibels).
Attenuation: Measures how much the signal has degraded as it travels from the DSLAM to the modem and vice-versa. In this case, the lower the number, the better. Usually the maximum attenuation that can occur and still have a readable signal is about 60-65dB.
Nu ben ik benieuwd naar jullie specs, gewoon om te zien of er veel verschil is in lijn kwaliteit en zo ja, uitvinden waar dat in zit (zal wel vooral afstand tot centrale zijn). Als aftrap hier mijn specs:
Abo: Zon Breedband Family (512 / 128)
Modem: E-Tech ADSL Modem met ingebouwde 4p router
Telefoonlijn: analoog
SNR Margin (dB's): 35.3 / 20.0
Line Attenuation (dB's): 10.1 / 13.5
Voor de duidelijkheid: de verschillende waarden zijn dus voor downstream en upstream, respectievelijk
[ Voor 5% gewijzigd door lankras op 16-01-2003 23:19 ]