Mensen, wat vinden jullie van het nieuwe voor/eindversterker combo'tje van Arcam ?
Dit merk staat absoluut niet bekend om home cinema prestaties whatsoever, maar dit nieuwe setje zou op Lexicon/meridian niveau moeten kunnen meespelen aldus what hi fi. Een echte topper dus. het kost alleen wel 5000 pond ...
maar het ziet er zeker
uit...
FMJ AV8 PREAMP PROCESSOR

FMJ P7 Power Amplifier

SAMEN

Het zou Arcam een miljoen $ gekost hebben om het te ontwikkelen en is voor de prestaties redelijk goedkoop...
Het is uiteraard THX ultra 2 gecertificeerd en de 7 kanaals eindversterker levert maar liefst 1.6 kilowatt aan vermogen
(pics zijn niet echt super zo van opzij maar goed)
Specs voorversterker :
TECHNICAL SPECIFICATIONS
PREAMP PROCESSOR FMJ AV8
AUDIO
Line input sensitivity 2Vrms
Input impedance 10k ohms
Preamp output level (nominal) 2V
Output impedance 25 ohms
Signal/noise ratio (unwtd 20Hz/20Hz) - analogue
Signal/noise ratio (unwtd 20Hz/20Hz) - digital (24 bit)
>100dB
>98dB
THD + N - analogue
THD + N - digital (24 bit) 0.0012%
0.0015%
Headphone max output level into 600 ohms
Output impedance 5V p-p
5 ohms
VIDEO INPUTS AND OUTPUTS
Input and output impedance 75 ohms
Composite video level 1V
HF response to (-3dB) 12MHz
S-Video level (Y/C) 1V / 0.28V
HF response to (3dB) 12MHz
HQ (component) video
level (Y/Cr/Cb) 1V / 0.5V / 0.5V
level (R/G/B) 1V / 1V / 1V
HF response to (-3dB) 300MHz
Digital inputs
Coaxial connection (level / impedance) 0.5V / 75 ohms
Acceptable sampling frequencies, all inputs 44.1 kHz, 48kHz, (and 96kHz stereo only)
Digial output
Output level impedance 0.5V / 75 ohms
Sampling frequency in ADC output mode 44.1kHz
Trigger outputs
Output D.C. voltage (excl. RGB status) 12V +/- 1V
Allowable load 30mA max (min 400 ohms)
Remote inputs and outputs
Signal modulated 36kHz carrier
Coding Philips RC-5
GENERAL
Mains voltage range 85V to 265V
Power Consumption 35 VA
Power Consumption (standby) 2 VA
Dimensions WxDxH (including feet) 433mm x 430mm x 130mm
Weight (packed) 14kg nett
Specs Eindversterker
MULTICHANNEL POWER AMPLIFIER FMJ P7
All measurements are with 230V / 50 Hz mains power
Continuous Power Output
Watts Per Channel
All channels driven
20Hz - 20Hz, 8ohms, 150WPC
20Hz - 20Hz, 4ohms, 230WPC 1.05kW total
1.62kW total
One or two channels driven at 1kHz
8ohms, 160WPC
4ohms, 230WPC
3.2ohms, 300WPC
Peak Output Current Capability
>22 amps per channel
Total Harmonic Distortion
At any level up to rated power, into 4 or 8 ohms
<0.05% 20Hz - 20Hz, typically <0.005% at 1kHz
Frequency Response
+/- 0.2dB 20Hz - 20Hz
-1 dB at 1Hz and 100kHz
Residual Hum and Noise
Typically -112dB ref full power
Voltage Gain
X28.3 (1 volt input gives 100W / 8 ohms output)
Input Impedance
22 kohms in parallel with 470 pF
Output Impedance
50 milliohms at 20Hz, 1kHz
120 milliohms at 20Hz
Power Requirements
115 or 230 VAC, 50 / 60Hz, 3kW maximum via heavy duty IEC mains inlet
A soft start system eliminates large currents at switch on
General
Dimensions W/D/H mm. inc. feet. 433x460x180
Weight (packed) 35kg
Dit merk staat absoluut niet bekend om home cinema prestaties whatsoever, maar dit nieuwe setje zou op Lexicon/meridian niveau moeten kunnen meespelen aldus what hi fi. Een echte topper dus. het kost alleen wel 5000 pond ...
maar het ziet er zeker
FMJ AV8 PREAMP PROCESSOR

FMJ P7 Power Amplifier

SAMEN

Het zou Arcam een miljoen $ gekost hebben om het te ontwikkelen en is voor de prestaties redelijk goedkoop...
Het is uiteraard THX ultra 2 gecertificeerd en de 7 kanaals eindversterker levert maar liefst 1.6 kilowatt aan vermogen
(pics zijn niet echt super zo van opzij maar goed)
Specs voorversterker :
TECHNICAL SPECIFICATIONS
PREAMP PROCESSOR FMJ AV8
AUDIO
Line input sensitivity 2Vrms
Input impedance 10k ohms
Preamp output level (nominal) 2V
Output impedance 25 ohms
Signal/noise ratio (unwtd 20Hz/20Hz) - analogue
Signal/noise ratio (unwtd 20Hz/20Hz) - digital (24 bit)
>100dB
>98dB
THD + N - analogue
THD + N - digital (24 bit) 0.0012%
0.0015%
Headphone max output level into 600 ohms
Output impedance 5V p-p
5 ohms
VIDEO INPUTS AND OUTPUTS
Input and output impedance 75 ohms
Composite video level 1V
HF response to (-3dB) 12MHz
S-Video level (Y/C) 1V / 0.28V
HF response to (3dB) 12MHz
HQ (component) video
level (Y/Cr/Cb) 1V / 0.5V / 0.5V
level (R/G/B) 1V / 1V / 1V
HF response to (-3dB) 300MHz
Digital inputs
Coaxial connection (level / impedance) 0.5V / 75 ohms
Acceptable sampling frequencies, all inputs 44.1 kHz, 48kHz, (and 96kHz stereo only)
Digial output
Output level impedance 0.5V / 75 ohms
Sampling frequency in ADC output mode 44.1kHz
Trigger outputs
Output D.C. voltage (excl. RGB status) 12V +/- 1V
Allowable load 30mA max (min 400 ohms)
Remote inputs and outputs
Signal modulated 36kHz carrier
Coding Philips RC-5
GENERAL
Mains voltage range 85V to 265V
Power Consumption 35 VA
Power Consumption (standby) 2 VA
Dimensions WxDxH (including feet) 433mm x 430mm x 130mm
Weight (packed) 14kg nett
Specs Eindversterker
MULTICHANNEL POWER AMPLIFIER FMJ P7
All measurements are with 230V / 50 Hz mains power
Continuous Power Output
Watts Per Channel
All channels driven
20Hz - 20Hz, 8ohms, 150WPC
20Hz - 20Hz, 4ohms, 230WPC 1.05kW total
1.62kW total
One or two channels driven at 1kHz
8ohms, 160WPC
4ohms, 230WPC
3.2ohms, 300WPC
Peak Output Current Capability
>22 amps per channel
Total Harmonic Distortion
At any level up to rated power, into 4 or 8 ohms
<0.05% 20Hz - 20Hz, typically <0.005% at 1kHz
Frequency Response
+/- 0.2dB 20Hz - 20Hz
-1 dB at 1Hz and 100kHz
Residual Hum and Noise
Typically -112dB ref full power
Voltage Gain
X28.3 (1 volt input gives 100W / 8 ohms output)
Input Impedance
22 kohms in parallel with 470 pF
Output Impedance
50 milliohms at 20Hz, 1kHz
120 milliohms at 20Hz
Power Requirements
115 or 230 VAC, 50 / 60Hz, 3kW maximum via heavy duty IEC mains inlet
A soft start system eliminates large currents at switch on
General
Dimensions W/D/H mm. inc. feet. 433x460x180
Weight (packed) 35kg
[ Voor 75% gewijzigd door Verwijderd op 10-12-2002 16:02 ]