Letop ik heb het onderstaande ook toegepast en het werkt echt.
Follow these instructions very carefully.
Power on the player with no disk in the drive
Press "PAUSE" on the remote
Enter "1472" on the remote (the characters 01 47 should appear on the display)
[If your player is a non UK model, this number will probably be different - don't worry]
Press the UP arrow three times (the characters 04 Fd should appear on the display)
[This number may be different depending on the configuration of your specific model - don't worry]
Press "PROGRAM", "6", "PROGRAM", "5" (the characters 04 FE should now be displayed)
Press "ENTER" (the display should flash briefly)
Press "RETURN"
Power the player off and then back on
Play a VCD!
If you are having trouble getting the hack to work, try pressing "STOP" on the remote before you press "PAUSE" for the first time.
The above hack will also enable the 5.1 Speaker Setup menu which is of no use on players which do not have an in-built Dolby Digital decoder (e.g. DVD-3000E and DVD-4730). Therefore on these players perform the above procedure but exchange steps 4 and 5 for:
Press the UP arrow three times (the characters 04 9C should appear on the display)
[This number may be different depending on the configuration of your specific model - don't worry]
Press "PROGRAM", "4", "PROGRAM", "5" (the characters 04 dE should now be displayed)
Will it now play SVCDs, XVCDs, XSVCDs, or mini-DVDs?
No and it is unlikely that it ever will. It is indicated in the Service Manual that the specification of one of the decoder chips only supports VCD (thanks chuck).