1 ) Linux version 2.2.20ext3 (root@conn6m) (gcc version 2.7.2.3) #6 Thu May 2 12:00:25 2002
2 ) BIOS-provided physical RAM map:
3 ) BIOS-e820: 0009f000 @ 00000000 (usable)
4 ) BIOS-e820: 07eae000 @ 00100000 (usable)
5 ) Detected 927125 kHz processor.
6 ) Console: colour VGA+ 80x25
7 ) Calibrating delay loop... 1848.11 BogoMIPS
8 ) Memory: 127180k/130744k available (1560k kernel code, 416k reserved, 1496k data, 92k init)
9 ) Dentry hash table entries: 16384 (order 5, 128k)
10 ) Buffer cache hash table entries: 131072 (order 7, 512k)
11 ) Page cache hash table entries: 32768 (order 5, 128k)
12 ) Intel machine check architecture supported.
13 ) Intel machine check reporting enabled on CPU#0.
14 ) 256K L2 cache (8 way)
15 ) CPU: L2 Cache: 256K
16 ) CPU: Intel Pentium III (Coppermine) stepping 0a
17 ) Checking 386/387 coupling... OK, FPU using exception 16 error reporting.
18 ) Checking 'hlt' instruction... OK.
19 ) Checking for popad bug... OK.
20 ) POSIX conformance testing by UNIFIX
21 ) PCI: PCI BIOS revision 2.10 entry at 0xfc0ce
22 ) PCI: Probing PCI hardware
23 ) Linux NET4.0 for Linux 2.2
24 ) Based upon Swansea University Computer Society NET3.039
25 ) NET4: Unix domain sockets 1.0 for Linux NET4.0.
26 ) NET4: Linux TCP/IP 1.0 for NET4.0
27 ) IP Protocols: ICMP, UDP, TCP
28 ) TCP: Hash tables configured (ehash 131072 bhash 65536)
29 ) Starting kswapd v 1.5
29 ) parport0: PC-style at 0x378 (0x778), irq 7 [SPP,ECP,ECPPS2]
30 ) Serial driver version 4.27 with no serial options enabled
31 ) ttyS00 at 0x03f8 (irq = 4) is a 16550A
32 ) ttyS01 at 0x02f8 (irq = 3) is a 16550A
33 ) RAM disk driver initialized: 16 RAM disks of 4096K size
34 ) loop: registered device at major 7
35 ) PCI_IDE: unknown IDE controller on PCI bus 00 device f9, VID=8086, DID=2411
36 ) PCI_IDE: not 100% native mode: will probe irqs later
37 ) hda: QUANTUM FIREBALLP AS20.5, ATA DISK drive
38 ) hdc: _NEC DV-5800A, ATAPI CDROM drive
39 ) ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
40 ) ide1 at 0x170-0x177,0x376 on irq 15
41 ) hda: QUANTUM FIREBALLP AS20.5, 19595MB w/1902kB Cache, CHS=2498/255/63
42 ) hdc: ATAPI 48X DVD-ROM drive, 512kB Cache
43 ) Uniform CD-ROM driver Revision: 3.11
44 ) Floppy drive(s): fd0 is 1.44M
45 ) FDC 0 is a National Semiconductor PC87306
46 ) ppa: Version 2.07 (for Linux 2.2.x)
47 ) WARNING - no ppa compatible devices found.
As of 31/Aug/1998 Iomega started shipping parallel
port ZIP drives with a different interface which is
supported by the imm (ZIP Plus) driver. If the
cable is marked with "AutoDetect", this is what has
happened.
48 ) imm: Version 2.03 (for Linux 2.0.0)
49 ) scsi : 0 hosts.
50 ) scsi : detected total.
51 ) NET3 PLIP version 2.3-parport gniibe@mri.co.jp
52 ) plip0: Parallel port at 0x378, using IRQ 7
53 ) early initialization of device plip0 is deferred
54 ) SLIP: version 0.8.4-NET3.019-NEWTTY (dynamic channels, max=256).
55 ) 3c59x.c 18Feb01 Donald Becker and others http://www.scyld.com/network/vortex.html
56 ) eth0: 3Com 3c905C Tornado at 0xec80, 00:06:5b:10:59:42, IRQ 5
8K byte-wide RAM 5:3 Rx:Tx split, autoselect/Autonegotiate interface.
MII transceiver found at address 24, status 782d.
Enabling bus-master transmits and whole-frame receives.
57 ) Partition check:
hda: hda1 hda2 < hda5 >
58 ) VFS: Disk change detected on device fd(2,60)
59 ) RAMDISK: bzip2 Compressed image found at block 867
60 ) aaaiiiiiiiiiiiiioooooooooooooooooooooooooooooboiiiiiiiiiiioooooooooooooooooooooooooooooooboiiooooooooooooobfff
61 ) bzip2_out:0x00253000
62 ) bytes_out:0x00253000
63 ) NTFS version 000607
64 ) VFS: Mounted root (minix filesystem).
65 ) Freeing unused kernel memory: 92k freed
66 ) Linux PCMCIA Card Services 3.1.29
kernel build: 2.2.20ext3 unknown
options: [pci] [cardbus]
67 ) PCI routing table version 1.0 at 0xfbc30
68 ) Intel ISA/PCI/CardBus PCIC probe:
no bridges found.
69 ) ds: no socket drivers loaded!
70 ) eth0: Initial media type Autonegotiate.
71 ) eth0: MII #24 status 782d, link partner capability 4461, setting full-duplex.
kan er iemand mij a.u.b. vertellen wat bovenstaande allemaal betekent.
Heb het nodig voor school
please
2 ) BIOS-provided physical RAM map:
3 ) BIOS-e820: 0009f000 @ 00000000 (usable)
4 ) BIOS-e820: 07eae000 @ 00100000 (usable)
5 ) Detected 927125 kHz processor.
6 ) Console: colour VGA+ 80x25
7 ) Calibrating delay loop... 1848.11 BogoMIPS
8 ) Memory: 127180k/130744k available (1560k kernel code, 416k reserved, 1496k data, 92k init)
9 ) Dentry hash table entries: 16384 (order 5, 128k)
10 ) Buffer cache hash table entries: 131072 (order 7, 512k)
11 ) Page cache hash table entries: 32768 (order 5, 128k)
12 ) Intel machine check architecture supported.
13 ) Intel machine check reporting enabled on CPU#0.
14 ) 256K L2 cache (8 way)
15 ) CPU: L2 Cache: 256K
16 ) CPU: Intel Pentium III (Coppermine) stepping 0a
17 ) Checking 386/387 coupling... OK, FPU using exception 16 error reporting.
18 ) Checking 'hlt' instruction... OK.
19 ) Checking for popad bug... OK.
20 ) POSIX conformance testing by UNIFIX
21 ) PCI: PCI BIOS revision 2.10 entry at 0xfc0ce
22 ) PCI: Probing PCI hardware
23 ) Linux NET4.0 for Linux 2.2
24 ) Based upon Swansea University Computer Society NET3.039
25 ) NET4: Unix domain sockets 1.0 for Linux NET4.0.
26 ) NET4: Linux TCP/IP 1.0 for NET4.0
27 ) IP Protocols: ICMP, UDP, TCP
28 ) TCP: Hash tables configured (ehash 131072 bhash 65536)
29 ) Starting kswapd v 1.5
29 ) parport0: PC-style at 0x378 (0x778), irq 7 [SPP,ECP,ECPPS2]
30 ) Serial driver version 4.27 with no serial options enabled
31 ) ttyS00 at 0x03f8 (irq = 4) is a 16550A
32 ) ttyS01 at 0x02f8 (irq = 3) is a 16550A
33 ) RAM disk driver initialized: 16 RAM disks of 4096K size
34 ) loop: registered device at major 7
35 ) PCI_IDE: unknown IDE controller on PCI bus 00 device f9, VID=8086, DID=2411
36 ) PCI_IDE: not 100% native mode: will probe irqs later
37 ) hda: QUANTUM FIREBALLP AS20.5, ATA DISK drive
38 ) hdc: _NEC DV-5800A, ATAPI CDROM drive
39 ) ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
40 ) ide1 at 0x170-0x177,0x376 on irq 15
41 ) hda: QUANTUM FIREBALLP AS20.5, 19595MB w/1902kB Cache, CHS=2498/255/63
42 ) hdc: ATAPI 48X DVD-ROM drive, 512kB Cache
43 ) Uniform CD-ROM driver Revision: 3.11
44 ) Floppy drive(s): fd0 is 1.44M
45 ) FDC 0 is a National Semiconductor PC87306
46 ) ppa: Version 2.07 (for Linux 2.2.x)
47 ) WARNING - no ppa compatible devices found.
As of 31/Aug/1998 Iomega started shipping parallel
port ZIP drives with a different interface which is
supported by the imm (ZIP Plus) driver. If the
cable is marked with "AutoDetect", this is what has
happened.
48 ) imm: Version 2.03 (for Linux 2.0.0)
49 ) scsi : 0 hosts.
50 ) scsi : detected total.
51 ) NET3 PLIP version 2.3-parport gniibe@mri.co.jp
52 ) plip0: Parallel port at 0x378, using IRQ 7
53 ) early initialization of device plip0 is deferred
54 ) SLIP: version 0.8.4-NET3.019-NEWTTY (dynamic channels, max=256).
55 ) 3c59x.c 18Feb01 Donald Becker and others http://www.scyld.com/network/vortex.html
56 ) eth0: 3Com 3c905C Tornado at 0xec80, 00:06:5b:10:59:42, IRQ 5
8K byte-wide RAM 5:3 Rx:Tx split, autoselect/Autonegotiate interface.
MII transceiver found at address 24, status 782d.
Enabling bus-master transmits and whole-frame receives.
57 ) Partition check:
hda: hda1 hda2 < hda5 >
58 ) VFS: Disk change detected on device fd(2,60)
59 ) RAMDISK: bzip2 Compressed image found at block 867
60 ) aaaiiiiiiiiiiiiioooooooooooooooooooooooooooooboiiiiiiiiiiioooooooooooooooooooooooooooooooboiiooooooooooooobfff
61 ) bzip2_out:0x00253000
62 ) bytes_out:0x00253000
63 ) NTFS version 000607
64 ) VFS: Mounted root (minix filesystem).
65 ) Freeing unused kernel memory: 92k freed
66 ) Linux PCMCIA Card Services 3.1.29
kernel build: 2.2.20ext3 unknown
options: [pci] [cardbus]
67 ) PCI routing table version 1.0 at 0xfbc30
68 ) Intel ISA/PCI/CardBus PCIC probe:
no bridges found.
69 ) ds: no socket drivers loaded!
70 ) eth0: Initial media type Autonegotiate.
71 ) eth0: MII #24 status 782d, link partner capability 4461, setting full-duplex.
kan er iemand mij a.u.b. vertellen wat bovenstaande allemaal betekent.
Heb het nodig voor school
please