-XP- Cdrom *.exe files fouten

Pagina: 1
Acties:

  • SonyEricsson
  • Registratie: September 2002
  • Laatst online: 00:23
Mijn probleem
Sinds vandaag krijg ik opeens fouten als ik *.exe files van me cdrom wil opstarten
(bv. auton of setup )

De volgende foutmelding kijrg ik :

16-bits MS-Dos-subsysteem

D:\autorun.exe

De NTVDM-CPU heeft een ongeldige instructie aangetroffen.
bla bla bla bla
kies sluiten om de toepassing af te sluiten

en dan kan ik kiezen uit sluiten of negeren


Wie weet hoe ik dit moet verhelpen


Mijn systconf.

PIII 1000EB
384 MB sdram
I810E MS6305
Radeon 7000


Ik heb al wat gezocht maar werd er niet wijzer op

  • blackd
  • Registratie: Februari 2001
  • Niet online
Wat voor CDROM speler is het, pakt hij andere CD's wel goed?
Zo ja: doet de CDROM het in een andere PC wel goed?
Zo nee: Zit de IDE kabel goed, heb je een andere CDROM speler in de PC geprobeerd?

9000Wp o/w SolarEdge SE6K - Panasonic 5kW bi-bloc - gasloos sinds 17-7-2023


  • Jeldert
  • Registratie: Juni 2001
  • Niet online

Jeldert

Rozijntjes

Van Microsoft (http://support.microsoft....US;q245184&LNG=ENG&SA=PER)
NTVDM CPU Has Encountered an Illegal Instruction
The information in this article applies to:
Microsoft Windows NT Server 4.0
Microsoft Windows NT Workstation 4.0

SYMPTOMS
When you attempt to run a 16-bit program on a computer running Microsoft Windows NT 4.0 Service Pack 3, the program may quit immediately, or you may receive the following error message:

Hidden Console of WOW VDM
The NTVDM CPU has encountered an illegal instruction.
CS: 04c3 IP:3937 OP:c71c 9d 37 00
Choose Close to terminate the application.
When you click Close, you may receive several similar error messages.
CAUSE
This behavior can occur if you use an incorrect version of the Command.com file. For example, this issue is known to occur if you use a Command.com file included in Microsoft Windows 95, dated 7/11/95.
RESOLUTION
To resolve this issue, replace the Command.com file in the Winnt\System32 folder with the same file from another computer that is running Windows NT Workstation 4.0 or Windows NT Server 4.0, and then make sure that there are no Command.com files dated 7/11/95 on the computer. You can also replace the Command.com file on the computer with the same file on the Windows NT installation CD-ROM.

Juist


  • SonyEricsson
  • Registratie: September 2002
  • Laatst online: 00:23
Maar ik draai WinXP :?

Ik de cdrom deed het vanmorgen nog gewoon goed
Het is een Sanyo/IBm 32x