refreshrate instellen. - Linux en overige clients

maandag 23 september 2002 20:50

Acties:

-= Tja =-

Topicstarter

Ik heb een tijdje geleden een tijdje gedraaid met Mandrake 8.2 maar na een crash en een paar irritante ervaringen heb ik het een tijdje voor gezien gehouden. Ik draai nu met Mandrake 9.0 en ik heb troubles om mijn refreshrate goed te krijgen.

De vorige keer heb ik een Modeline laten berekenen en die toegevoegd, maar ik heb begrepen dat met de nieuwe XFree dat het niet meer nodig was en dat hij zelf alle info wel kon afleiden. Hij kan alles wel netjes afleiden maar 76Hz vind ik niet werkbaar.

Ik heb een Matrox g450 en een Illyama 510 en wil op 1440x1080 draaien en helaas werk Powerdesk van Matrox ook niet meer (daar heb ik de vorige keer de refresh rate even perfect mee ingestelt).

Ik ben intussen al weer een aantal uren bezig en van computer heb ik op zich wel wat verstand (schijnt dat ik software ervoor kan schrijven), maar ik krijg dit niet voor elkaar. Wie kan mij even helpen?

maandag 23 september 2002 21:04

Acties:

Lethalis

/etc/X11/XF86Config

"DefaultRefresh"

Ask yourself if you are happy and then you cease to be.

dinsdag 24 september 2002 09:04

Acties:

Alarmnummer

-= Tja =-

Topicstarter

Op DefaultRefresh + XF86Config heb ik bitter weinig kunnen vinden, dus ik weet ook niet onder welke sectie die geplaatst moet worden: Monitor, Screen?

dinsdag 24 september 2002 09:32

Acties:

Lethalis

Meestal staat het al in dat bestand. Ik kan er nu je het zegt ook weinig over vinden. Meestal configureer ik X gewoon met het progje xf86config en tweak daarna /etc/X11/XF86Config en dan is die optie er meestal.

Ik kan nu ff niet controleren waar precies, aangezien ik hier op mijn werk geen X gebruik.

Ask yourself if you are happy and then you cease to be.

dinsdag 24 september 2002 09:36

Acties:

zwik

randomized

Alarmnummer schreef op 24 september 2002 @ 09:04:
Op DefaultRefresh + XF86Config heb ik bitter weinig kunnen vinden, dus ik weet ook niet onder welke sectie die geplaatst moet worden: Monitor, Screen?

Ik zou zeggen: doe je ondertitel eer aan

.

Trouwens, volgens mij kan het ook met VertRefresh.

dinsdag 24 september 2002 21:28

Acties:

tiguan

Ik heb een soortgelijk probleem. Ik heb m'n pc geinstalleerd met een Iiyama monitor er aan. En daar werkte in een keer de hele meuk perfect op 1280x1024@85Hz zonder ook maar een dingetje er aan te hoeven doen.

Nu heb ik m'n pc weer thuis staan en m'n Dell P990 er op aangesloten die dezelfde resolutie aankan, maar ik krijg hem in geen enkele resolutie hoger dan 60Hz. Ik heb m'n monitor gewoon opgegeven. Ik heb de XF86Config-4 nagelopen, en daar staat volgens mij alles goed. Maar hij pakt gewoon geen lekkere refresh rate, 60Hz is echt heel naar om mee werken.

woensdag 25 september 2002 01:55

Acties:

viper

Waar het om gaat is de Horizontale en verticale refreshrate (te vinden in boekje, op internet, waarever

). Zodra deze goed ingesteld staan in je XF86Config(-4), dan pakt X idd bij je ingestelde resolutie de juiste refreshrate (als je geen modelines hebt ingesteld).. Dus zou zeggen, lees nog ff de configfile door

woensdag 25 september 2002 02:34

Acties:

tiguan

Dat d8 jij. Mooi niet dat X dat ff zelf uitzoekt hoor.

Bij mij staat er

HorizSync 30.0-96.0
VertRefresh 48.0-120.0

Volgens het boekje van mijn monitor is dat precies goed. En toch doet X lekker eigenwijs 60Hz. Met of zonder ModeLine.

woensdag 25 september 2002 08:46

Acties:

Alarmnummer

-= Tja =-

Topicstarter

Ik heb geen Modeline toegevoegd, maar ik heb de VertRefresh veranderd van 50-160 naar 85 en ik heb nu een superstrak beeld.

[edit]
hmmzzz.. toch niet helemaal goed gegaan. Hij staat nu wel op 85 Hz, maar op 1280x1024

woensdag 25 september 2002 09:43

Acties:

Verwijderd

Wat is je maximale Horizontal freq?
Kan je monitor wel 1440x1080 op 85Hz?
(Zou je hor freq zo'n 100kHz moeten zijn, 85x1080 plus een %-tje of wat)

Je kan ook de resolutie regel met 1280x1024 uit je /etc/X11/XF86config-4 slopen.

Wat ik ooit gedaan heb om 1280x1024 op 100Hz te krijgen, was met modelines en xvidmode (dacht ik, progje om je timings aan te passen) te spelen. Voor de juiste naam van het progje zul je ff moeten zoeken in dit forum...
In elk geval, je kunt je modeline aanmaken door gewoon x te starten en dan te kijken wat je instellingen zijn.
Dan pas je in de console je XF86config-4 aan, modeline toevoegen, dotfrequency verhogen, evt timings aanpassen, en gaan. Geen onrealistische waarden nemen, kan slecht zijn voor je monitor.
Bij mij was ik er al gauw achter dat als de pixel frequency te hoog is, mijn monitor afschakelt, de meesten zijn zo beveiligd gelukkig..

Als het niet lukt, dan kijk ik vanavond thuis nog wel ff hoe het een en ander heet en waar je het kunt vinden..

woensdag 25 september 2002 15:32

Acties:

Alarmnummer

-= Tja =-

Topicstarter

Mijn monitor die kan dat met gemak aan. Doe moet 1600x1200 met 110 Hz aankunnen. Ik ben nu al weer een aantal uren bezig en ik kom iedere keer (ook bij vorige installaties) tot de conclusie dat linux als desktop omgeving veruit inferieur is aan windows. Windows is sneller, stabieler (dan kde), makkelijker om aan te passen, ziet er beter uit, eenvormiger.

De enigste reden dat ik linux wil draaien is dat er een aantal tools uit zijn voor *nix maar niet voor windows, en ik wil wat ervaring opdoen (alhoewel ik me steeds meer ga afvragen waarom ik dat in godsnaam zou willen).

*gefrustreerde windowsman onder linux*

woensdag 25 september 2002 15:38

Acties:

Lethalis

Linux vergt dedicatie. Je moet bereid zijn dingen uit te zoeken.

Anyway: zet onder je VertRefresh regel gewoon eens voor de grap "DefaultRefresh 85" en start X op.

Greetz,
Lethalis

Ask yourself if you are happy and then you cease to be.

woensdag 25 september 2002 15:41

Acties:

Lethalis

Daarnaast kun je misschien eens je log posten (/var/log/XFree86.log oid). Dan kunnen we zien of er screens gedefinieerd zijn en of hij de goede driver gebruikt.

Ask yourself if you are happy and then you cease to be.

woensdag 25 september 2002 15:46

Acties:

Alarmnummer

-= Tja =-

Topicstarter

Ik ben best bereid om dingen uit te zoeken. Ik heb intussen al een handleiding gelezen over alle zaken die belangrijk zijn voor een Modeline, ik heb net met de hand een Modeline berekend en ik heb tig online calculators geprobeerd. Maar mijn resolutie pakt ie gewoon niet (terwijl dat vorige keer geen probleem was). Helaas heeft matrox ook al tijden geen nieuwe drivers meer uitgebracht voor xfree en xfree4.2.1 wordt ook niet ondersteund..

Ik zit nu onder windows (wel met 1440x1080@85 Hz) en ik kan inderdaad niet alles tweaken (hoewel ik daar ook geen behoefte aan heb).

woensdag 25 september 2002 15:52

Acties:

Alarmnummer

-= Tja =-

Topicstarter

Mijn XF86Config-4

code:

Section "ServerLayout"
    Identifier     "Matrox PowerDesk configured."
    Screen         "screen1" 0 0
    InputDevice    "Keyboard1" "CoreKeyboard"
    InputDevice    "Mouse1" "CorePointer"
EndSection

Section "Files"
    FontPath     "unix/:-1"
EndSection

Section "Module"
    Load  "dbe"
    Load  "v4l"
    Load  "extmod"
    Load  "type1"
    Load  "freetype"
    Load  "glx"
    Load  "dri"
EndSection

Section "ServerFlags"
    Option "allowmouseopenfail"
EndSection

Section "InputDevice"
    Identifier  "Keyboard1"
    Driver      "Keyboard"
    Option      "XkbModel" "pc105"
    Option      "XkbLayout" "us"
    Option      "XkbOptions" ""
EndSection

Section "InputDevice"
    Identifier  "Mouse1"
    Driver      "mouse"
    Option      "Protocol" "IMPS/2"
    Option      "Buttons" "7"
    Option      "Device" "/dev/usbmouse"
    Option      "ZAxisMapping" "4 5"
EndSection

Section "Monitor"
    Identifier   "monitor1"
    VendorName   "Iiyama"
    ModelName    "Iiyama A201HT, VisionMaster Pro 510"
    HorizSync    30.0 - 130.0
    VertRefresh  50.0 - 160.0
    #VertRefresh  85
    ModeLine     "1440x1080" 360.0 1440 1472 1768 1800 1080 1083 1086 1128
    ModeLine     "1024x480" 65.0 1024 1032 1176 1344 480 488 494 563 -hsync -vsync
    ModeLine     "768x576" 50.0 768 832 846 1000 576 590 595 630
    ModeLine     "768x576" 63.1 768 800 960 1024 576 578 590 616
EndSection

Section "Device"
    Identifier  "device1"
    Driver      "mga"
    VendorName  "Matrox"
    BoardName   "Matrox Millennium G450"
    VideoRam    32768
    Option      "DPMS"
    Option      "AGPMode" "true"
    BusID       "PCI:1:0:0"
EndSection

Section "Screen"
    Identifier "screen1"
    Device     "device1"
    Monitor    "monitor1"
    DefaultDepth     16
    SubSection "Display"
        Depth     8
        Modes    "1400x1050" "1280x1024" "1152x864" "1024x768" "800x600" "640x480"
    EndSubSection
    SubSection "Display"
        Depth     15
        Modes    "1400x1050" "1280x1024" "1280x960" "1152x864" "1024x768" "800x600" "640x480"
    EndSubSection
    SubSection "Display"
        Depth     16
        Modes    "1400x1050" "1280x1024" "1152x864" "1024x768" "800x600" "640x480"
    EndSubSection
    SubSection "Display"
        Depth     24
        Modes    "1400x1050" "1280x1024" "1152x864" "1024x768" "800x600" "640x480"
    EndSubSection
EndSection

Section "DRI"
    Mode         0666
EndSection

En bij Modes stond "1440x1080" voorop (waar nu 1400x1050 staat) maar dan gaat ie automatisch naar 1600x1200.

woensdag 25 september 2002 16:05

Acties:

Alarmnummer

-= Tja =-

Topicstarter

Die defaultrefresh die pakt ie trouwens niet (syntax error)

woensdag 25 september 2002 16:14

Acties:

Alarmnummer

-= Tja =-

Topicstarter

Dit is trouwens mijn log.

code:

XFree86 Version 4.2.1 / X Window System
(protocol Version 11, revision 0, vendor release 6600)
Release Date: 3 September 2002
    If the server is older than 6-12 months, or if your card is
    newer than the above date, look for a newer version before
    reporting problems.  (See http://www.XFree86.Org/)
Build Operating System: Linux 2.4.18-23mdkenterprise i686 [ELF] 
Module Loader present
Markers: (--) probed, (**) from config file, (==) default setting,
         (++) from command line, (!!) notice, (II) informational,
         (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/XFree86.0.log", Time: Thu Sep 26 16:11:51 2002
(==) Using config file: "/etc/X11/XF86Config-4"
(==) ServerLayout "Matrox PowerDesk configured."
(**) |-->Screen "screen1" (0)
(**) |   |-->Monitor "monitor1"
(**) |   |-->Device "device1"
(**) |-->Input Device "Keyboard1"
(**) Option "XkbModel" "pc105"
(**) XKB: model: "pc105"
(**) Option "XkbLayout" "us"
(**) XKB: layout: "us"
(WW) Option "XkbOptions" requires an string value
(==) Keyboard: CustomKeycode disabled
(**) |-->Input Device "Mouse1"
(**) FontPath set to "unix/:-1"
(==) RgbPath set to "/usr/X11R6/lib/X11/rgb"
(==) ModulePath set to "/usr/X11R6/lib/modules"
(**) Option "AllowMouseOpenFail"
Using vt 7
(--) using VT number 7

(II) Open APM successful
(II) Module ABI versions:
    XFree86 ANSI C Emulation: 0.1
    XFree86 Video Driver: 0.5
    XFree86 XInput driver : 0.3
    XFree86 Server Extension : 0.1
    XFree86 Font Renderer : 0.3
(II) Loader running on linux
(II) LoadModule: "bitmap"
(II) Loading /usr/X11R6/lib/modules/fonts/libbitmap.a
(II) Module bitmap: vendor="The XFree86 Project"
    compiled for 4.2.1, module version = 1.0.0
    Module class: XFree86 Font Renderer
    ABI class: XFree86 Font Renderer, version 0.3
(II) Loading font Bitmap
(II) LoadModule: "pcidata"
(II) Loading /usr/X11R6/lib/modules/libpcidata.a
(II) Module pcidata: vendor="The XFree86 Project"
    compiled for 4.2.1, module version = 0.1.0
    ABI class: XFree86 Video Driver, version 0.5
(II) PCI: Probing config type using method 1
(II) PCI: Config type is 1
(II) PCI: stages = 0x03, oldVal1 = 0x80003c48, mode1Res1 = 0x80000000
(II) PCI: PCI scan (all values are in hex)
(II) PCI: 00:00:0: chip 1106,0305 card 0000,0000 rev 03 class 06,00,00 hdr 00
(II) PCI: 00:01:0: chip 1106,8305 card 0000,0000 rev 00 class 06,04,00 hdr 01
(II) PCI: 00:07:0: chip 1106,0686 card 1106,0000 rev 40 class 06,01,00 hdr 80
(II) PCI: 00:07:1: chip 1106,0571 card 0000,0000 rev 06 class 01,01,8a hdr 00
(II) PCI: 00:07:2: chip 1106,3038 card 0925,1234 rev 1a class 0c,03,00 hdr 00
(II) PCI: 00:07:3: chip 1106,3038 card 0925,1234 rev 1a class 0c,03,00 hdr 00
(II) PCI: 00:07:4: chip 1106,3057 card 0000,0000 rev 40 class 06,00,00 hdr 00
(II) PCI: 00:0c:0: chip 1011,0014 card 0000,0000 rev 21 class 02,00,00 hdr 00
(II) PCI: 00:0d:0: chip 1013,6003 card 1681,a010 rev 01 class 04,01,00 hdr 00
(II) PCI: 01:00:0: chip 102b,0525 card 102b,0641 rev 82 class 03,00,00 hdr 00
(II) PCI: End of PCI scan
(II) LoadModule: "scanpci"
(II) Loading /usr/X11R6/lib/modules/libscanpci.a
(II) Module scanpci: vendor="The XFree86 Project"
    compiled for 4.2.1, module version = 0.1.0
    ABI class: XFree86 Video Driver, version 0.5
(II) UnloadModule: "scanpci"
(II) Unloading /usr/X11R6/lib/modules/libscanpci.a
(II) Host-to-PCI bridge:
(II) PCI-to-ISA bridge:
(II) Host-to-PCI bridge:
(II) PCI-to-PCI bridge:
(II) Bus 0: bridge is at (0:0:0), (-1,0,0), BCTRL: 0x08 (VGA_EN is set)
(II) Bus 0 I/O range:
    [0] -1  0x00000000 - 0x0000ffff (0x10000) IX[B]
(II) Bus 0 non-prefetchable memory range:
    [0] -1  0x00000000 - 0xffffffff (0x0) MX[B]
(II) Bus 0 prefetchable memory range:
    [0] -1  0x00000000 - 0xffffffff (0x0) MX[B]
(II) Bus 1: bridge is at (0:1:0), (0,1,1), BCTRL: 0x0c (VGA_EN is set)
(II) Bus 1 I/O range:
(II) Bus 1 non-prefetchable memory range:
    [0] -1  0xd6000000 - 0xd8ffffff (0x3000000) MX[B]
(II) Bus 1 prefetchable memory range:
    [0] -1  0xd4000000 - 0xd5ffffff (0x2000000) MX[B]
(II) Bus -1: bridge is at (0:7:0), (0,-1,0), BCTRL: 0x08 (VGA_EN is set)
(II) Bus -1 I/O range:
(II) Bus -1 non-prefetchable memory range:
(II) Bus -1 prefetchable memory range:
(II) Bus -1: bridge is at (0:7:4), (-1,-1,0), BCTRL: 0x08 (VGA_EN is set)
(II) Bus -1 I/O range:
    [0] -1  0x00000000 - 0x0000ffff (0x10000) IX[B]
(II) Bus -1 non-prefetchable memory range:
    [0] -1  0x00000000 - 0xffffffff (0x0) MX[B]
(II) Bus -1 prefetchable memory range:
    [0] -1  0x00000000 - 0xffffffff (0x0) MX[B]
(--) PCI:*(1:0:0) Matrox MGA G400 AGP rev 130, Mem @ 0xd4000000/25, 0xd6000000/14, 0xd7000000/23
(II) Addressable bus resource ranges are
    [0] -1  0x00000000 - 0xffffffff (0x0) MX[B]
    [1] -1  0x00000000 - 0x0000ffff (0x10000) IX[B]
(II) OS-reported resource ranges:
    [0] -1  0xffe00000 - 0xffffffff (0x200000) MX[B](B)
    [1] -1  0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
    [2] -1  0x000f0000 - 0x000fffff (0x10000) MX[B]
    [3] -1  0x000c0000 - 0x000effff (0x30000) MX[B]
    [4] -1  0x00000000 - 0x0009ffff (0xa0000) MX[B]
    [5] -1  0x0000ffff - 0x0000ffff (0x1) IX[B]
    [6] -1  0x00000000 - 0x000000ff (0x100) IX[B]
(II) Active PCI resource ranges:
    [0] -1  0xda000000 - 0xda0fffff (0x100000) MX[B]
    [1] -1  0xda100000 - 0xda100fff (0x1000) MX[B]
    [2] -1  0xda101000 - 0xda10107f (0x80) MX[B]
    [3] -1  0xd0000000 - 0xd3ffffff (0x4000000) MX[B]
    [4] -1  0xd7000000 - 0xd77fffff (0x800000) MX[B](B)
    [5] -1  0xd6000000 - 0xd6003fff (0x4000) MX[B](B)
    [6] -1  0xd4000000 - 0xd5ffffff (0x2000000) MX[B](B)
    [7] -1  0x0000ec00 - 0x0000ec7f (0x80) IX[B]
    [8] -1  0x0000e800 - 0x0000e81f (0x20) IX[B]
    [9] -1  0x0000e400 - 0x0000e41f (0x20) IX[B]
    [10] -1 0x0000e000 - 0x0000e00f (0x10) IX[B]
(II) Active PCI resource ranges after removing overlaps:
    [0] -1  0xda000000 - 0xda0fffff (0x100000) MX[B]
    [1] -1  0xda100000 - 0xda100fff (0x1000) MX[B]
    [2] -1  0xda101000 - 0xda10107f (0x80) MX[B]
    [3] -1  0xd0000000 - 0xd3ffffff (0x4000000) MX[B]
    [4] -1  0xd7000000 - 0xd77fffff (0x800000) MX[B](B)
    [5] -1  0xd6000000 - 0xd6003fff (0x4000) MX[B](B)
    [6] -1  0xd4000000 - 0xd5ffffff (0x2000000) MX[B](B)
    [7] -1  0x0000ec00 - 0x0000ec7f (0x80) IX[B]
    [8] -1  0x0000e800 - 0x0000e81f (0x20) IX[B]
    [9] -1  0x0000e400 - 0x0000e41f (0x20) IX[B]
    [10] -1 0x0000e000 - 0x0000e00f (0x10) IX[B]
(II) OS-reported resource ranges after removing overlaps with PCI:
    [0] -1  0xffe00000 - 0xffffffff (0x200000) MX[B](B)
    [1] -1  0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
    [2] -1  0x000f0000 - 0x000fffff (0x10000) MX[B]
    [3] -1  0x000c0000 - 0x000effff (0x30000) MX[B]
    [4] -1  0x00000000 - 0x0009ffff (0xa0000) MX[B]
    [5] -1  0x0000ffff - 0x0000ffff (0x1) IX[B]
    [6] -1  0x00000000 - 0x000000ff (0x100) IX[B]
(II) All system resource ranges:
    [0] -1  0xffe00000 - 0xffffffff (0x200000) MX[B](B)
    [1] -1  0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
    [2] -1  0x000f0000 - 0x000fffff (0x10000) MX[B]
    [3] -1  0x000c0000 - 0x000effff (0x30000) MX[B]
    [4] -1  0x00000000 - 0x0009ffff (0xa0000) MX[B]
    [5] -1  0xda000000 - 0xda0fffff (0x100000) MX[B]
    [6] -1  0xda100000 - 0xda100fff (0x1000) MX[B]
    [7] -1  0xda101000 - 0xda10107f (0x80) MX[B]
    [8] -1  0xd0000000 - 0xd3ffffff (0x4000000) MX[B]
    [9] -1  0xd7000000 - 0xd77fffff (0x800000) MX[B](B)
    [10] -1 0xd6000000 - 0xd6003fff (0x4000) MX[B](B)
    [11] -1 0xd4000000 - 0xd5ffffff (0x2000000) MX[B](B)
    [12] -1 0x0000ffff - 0x0000ffff (0x1) IX[B]
    [13] -1 0x00000000 - 0x000000ff (0x100) IX[B]
    [14] -1 0x0000ec00 - 0x0000ec7f (0x80) IX[B]
    [15] -1 0x0000e800 - 0x0000e81f (0x20) IX[B]
    [16] -1 0x0000e400 - 0x0000e41f (0x20) IX[B]
    [17] -1 0x0000e000 - 0x0000e00f (0x10) IX[B]
(II) LoadModule: "dbe"
(II) Loading /usr/X11R6/lib/modules/extensions/libdbe.a
(II) Module dbe: vendor="The XFree86 Project"
    compiled for 4.2.1, module version = 1.0.0
    Module class: XFree86 Server Extension
    ABI class: XFree86 Server Extension, version 0.1
(II) Loading extension DOUBLE-BUFFER
(II) LoadModule: "v4l"
(II) Loading /usr/X11R6/lib/modules/drivers/linux/v4l_drv.o
(II) Module v4l: vendor="The XFree86 Project"
    compiled for 4.2.1, module version = 0.0.1
    ABI class: XFree86 Video Driver, version 0.5
(II) LoadModule: "extmod"
(II) Loading /usr/X11R6/lib/modules/extensions/libextmod.a
(II) Module extmod: vendor="The XFree86 Project"
    compiled for 4.2.1, module version = 1.0.0
    Module class: XFree86 Server Extension
    ABI class: XFree86 Server Extension, version 0.1
(II) Loading extension SHAPE
(II) Loading extension MIT-SUNDRY-NONSTANDARD
(II) Loading extension BIG-REQUESTS
(II) Loading extension SYNC
(II) Loading extension MIT-SCREEN-SAVER
(II) Loading extension XC-MISC
(II) Loading extension XFree86-VidModeExtension
(II) Loading extension XFree86-Misc
(II) Loading extension XFree86-DGA
(II) Loading extension DPMS
(II) Loading extension FontCache
(II) Loading extension TOG-CUP
(II) Loading extension Extended-Visual-Information
(II) Loading extension XVideo
(II) Loading extension XVideo-MotionCompensation
(II) LoadModule: "type1"
(II) Loading /usr/X11R6/lib/modules/fonts/libtype1.a
(II) Module type1: vendor="The XFree86 Project"
    compiled for 4.2.1, module version = 1.0.1
    Module class: XFree86 Font Renderer
    ABI class: XFree86 Font Renderer, version 0.3
(II) Loading font Type1
(II) Loading font CID
(II) LoadModule: "freetype"
(II) Loading /usr/X11R6/lib/modules/fonts/libfreetype.a
(II) Module freetype: vendor="The XFree86 Project"
    compiled for 4.2.1, module version = 1.1.10
    Module class: XFree86 Font Renderer
    ABI class: XFree86 Font Renderer, version 0.3
(II) Loading font FreeType
(II) LoadModule: "glx"
(II) Loading /usr/X11R6/lib/modules/extensions/libglx.a
(II) Module glx: vendor="The XFree86 Project"
    compiled for 4.2.1, module version = 1.0.0
    ABI class: XFree86 Server Extension, version 0.1
(II) Loading sub module "GLcore"
(II) LoadModule: "GLcore"
(II) Loading /usr/X11R6/lib/modules/extensions/libGLcore.a
(II) Module GLcore: vendor="The XFree86 Project"
    compiled for 4.2.1, module version = 1.0.0
    ABI class: XFree86 Server Extension, version 0.1
(II) Loading extension GLX
(II) LoadModule: "dri"
(II) Loading /usr/X11R6/lib/modules/extensions/libdri.a
(II) Module dri: vendor="The XFree86 Project"
    compiled for 4.2.1, module version = 1.0.0
    ABI class: XFree86 Server Extension, version 0.1
(II) Loading sub module "drm"
(II) LoadModule: "drm"
(II) Loading /usr/X11R6/lib/modules/linux/libdrm.a
(II) Module drm: vendor="The XFree86 Project"
    compiled for 4.2.1, module version = 1.0.0
    ABI class: XFree86 Server Extension, version 0.1
(II) Loading extension XFree86-DRI
(II) LoadModule: "mga"
(II) Loading /usr/X11R6/lib/modules/drivers/mga_drv.o
(II) Module mga: vendor="The XFree86 Project"
    compiled for 4.2.1, module version = 1.1.0
    Module class: XFree86 Video Driver
    ABI class: XFree86 Video Driver, version 0.5
(II) LoadModule: "mouse"
(II) Loading /usr/X11R6/lib/modules/input/mouse_drv.o
(II) Module mouse: vendor="The XFree86 Project"
    compiled for 4.2.1, module version = 1.0.0
    Module class: XFree86 XInput Driver
    ABI class: XFree86 XInput driver, version 0.3
(II) v4l driver for Video4Linux
(II) MGA: driver for Matrox chipsets: mga2064w, mga1064sg, mga2164w,
    mga2164w AGP, mgag100, mgag100 PCI, mgag200, mgag200 PCI, mgag400,
    mgag550
(II) Primary Device is: PCI 01:00:0
(--) Chipset mgag400 found
(II) resource ranges after xf86ClaimFixedResources() call:
    [0] -1  0xffe00000 - 0xffffffff (0x200000) MX[B](B)
    [1] -1  0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
    [2] -1  0x000f0000 - 0x000fffff (0x10000) MX[B]
    [3] -1  0x000c0000 - 0x000effff (0x30000) MX[B]
    [4] -1  0x00000000 - 0x0009ffff (0xa0000) MX[B]
    [5] -1  0xda000000 - 0xda0fffff (0x100000) MX[B]
    [6] -1  0xda100000 - 0xda100fff (0x1000) MX[B]
    [7] -1  0xda101000 - 0xda10107f (0x80) MX[B]
    [8] -1  0xd0000000 - 0xd3ffffff (0x4000000) MX[B]
    [9] -1  0xd7000000 - 0xd77fffff (0x800000) MX[B](B)
    [10] -1 0xd6000000 - 0xd6003fff (0x4000) MX[B](B)
    [11] -1 0xd4000000 - 0xd5ffffff (0x2000000) MX[B](B)
    [12] -1 0x0000ffff - 0x0000ffff (0x1) IX[B]
    [13] -1 0x00000000 - 0x000000ff (0x100) IX[B]
    [14] -1 0x0000ec00 - 0x0000ec7f (0x80) IX[B]
    [15] -1 0x0000e800 - 0x0000e81f (0x20) IX[B]
    [16] -1 0x0000e400 - 0x0000e41f (0x20) IX[B]
    [17] -1 0x0000e000 - 0x0000e00f (0x10) IX[B]
(II) resource ranges after probing:
    [0] -1  0xffe00000 - 0xffffffff (0x200000) MX[B](B)
    [1] -1  0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
    [2] -1  0x000f0000 - 0x000fffff (0x10000) MX[B]
    [3] -1  0x000c0000 - 0x000effff (0x30000) MX[B]
    [4] -1  0x00000000 - 0x0009ffff (0xa0000) MX[B]
    [5] -1  0xda000000 - 0xda0fffff (0x100000) MX[B]
    [6] -1  0xda100000 - 0xda100fff (0x1000) MX[B]
    [7] -1  0xda101000 - 0xda10107f (0x80) MX[B]
    [8] -1  0xd0000000 - 0xd3ffffff (0x4000000) MX[B]
    [9] -1  0xd7000000 - 0xd77fffff (0x800000) MX[B](B)
    [10] -1 0xd6000000 - 0xd6003fff (0x4000) MX[B](B)
    [11] -1 0xd4000000 - 0xd5ffffff (0x2000000) MX[B](B)
    [12] 0  0x000a0000 - 0x000affff (0x10000) MS[B]
    [13] 0  0x000b0000 - 0x000b7fff (0x8000) MS[B]
    [14] 0  0x000b8000 - 0x000bffff (0x8000) MS[B]
    [15] -1 0x0000ffff - 0x0000ffff (0x1) IX[B]
    [16] -1 0x00000000 - 0x000000ff (0x100) IX[B]
    [17] -1 0x0000ec00 - 0x0000ec7f (0x80) IX[B]
    [18] -1 0x0000e800 - 0x0000e81f (0x20) IX[B]
    [19] -1 0x0000e400 - 0x0000e41f (0x20) IX[B]
    [20] -1 0x0000e000 - 0x0000e00f (0x10) IX[B]
    [21] 0  0x000003b0 - 0x000003bb (0xc) IS[B]
    [22] 0  0x000003c0 - 0x000003df (0x20) IS[B]
(II) Setting vga for screen 0.
(II) Loading sub module "vgahw"
(II) LoadModule: "vgahw"
(II) Loading /usr/X11R6/lib/modules/libvgahw.a
(II) Module vgahw: vendor="The XFree86 Project"
    compiled for 4.2.1, module version = 0.1.0
    ABI class: XFree86 Video Driver, version 0.5
(**) MGA(0): Depth 16, (--) framebuffer bpp 16
(==) MGA(0): RGB weight 565
(WW) MGA(0): Option "AGPMode" requires an integer value
(--) MGA(0): Chipset: "mgag400"
(==) MGA(0): Using AGP 1x mode
(--) MGA(0): Linear framebuffer at 0xD4000000
(--) MGA(0): MMIO registers at 0xD6000000
(--) MGA(0): Pseudo-DMA transfer window at 0xD7000000
(==) MGA(0): BIOS at 0xC0000
(--) MGA(0): Video BIOS info block at offset 0x07CC0
(WW) MGA(0): Video BIOS info block not detected!
(II) MGA(0): MGABios.RamdacType = 0x0
(**) MGA(0): VideoRAM: 32768 kByte
(II) Loading sub module "ddc"
(II) LoadModule: "ddc"
(II) Loading /usr/X11R6/lib/modules/libddc.a
(II) Module ddc: vendor="The XFree86 Project"
    compiled for 4.2.1, module version = 1.0.0
    ABI class: XFree86 Video Driver, version 0.5
(II) Loading sub module "i2c"
(II) LoadModule: "i2c"
(II) Loading /usr/X11R6/lib/modules/libi2c.a
(II) Module i2c: vendor="The XFree86 Project"
    compiled for 4.2.1, module version = 1.2.0
    ABI class: XFree86 Video Driver, version 0.5
(==) MGA(0): Write-combining range (0xd4000000,0x2000000)
(II) MGA(0): vgaHWGetIOBase: hwp->IOBase is 0x03d0, hwp->PIOOffset is 0x0000
(II) MGA(0): I2C bus "DDC" initialized.
(II) MGA(0): I2C device "DDC:ddc2" registered.
(II) MGA(0): I2C device "DDC:ddc2" removed.
(II) MGA(0): I2C Monitor info: (nil)
(II) MGA(0): end of I2C Monitor info

(--) MGA(0): No DDC signal
(II) MGA(0): DDC Monitor info: (nil)
(II) MGA(0): end of DDC Monitor info

(==) MGA(0): Using gamma correction (1.0, 1.0, 1.0)
(==) MGA(0): Min pixel clock is 12 MHz
(==) MGA(0): Max pixel clock is 360 MHz
(II) MGA(0): monitor1: Using hsync range of 30.00-130.00 kHz
(II) MGA(0): monitor1: Using vrefresh range of 50.00-160.00 Hz
(II) MGA(0): Clock range:  12.00 to 360.00 MHz
(II) MGA(0): Not using mode "1440x1080" (hsync out of range)
(--) MGA(0): Has SDRAM
(--) MGA(0): Virtual size is 1400x1050 (pitch 1408)
(**) MGA(0): Default mode "1400x1050": 155.8 MHz, 81.5 kHz, 74.8 Hz
(II) MGA(0): Modeline "1400x1050"  155.80  1400 1464 1784 1912  1050 1052 1064 1090 +hsync +vsync
(**) MGA(0): Default mode "1280x1024": 157.5 MHz, 91.1 kHz, 85.0 Hz
(II) MGA(0): Modeline "1280x1024"  157.50  1280 1344 1504 1728  1024 1025 1028 1072 +hsync +vsync
(**) MGA(0): Default mode "1152x864": 108.0 MHz, 67.5 kHz, 75.0 Hz
(II) MGA(0): Modeline "1152x864"  108.00  1152 1216 1344 1600  864 865 868 900 +hsync +vsync
(**) MGA(0): Default mode "1024x768": 94.5 MHz, 68.7 kHz, 85.0 Hz
(II) MGA(0): Modeline "1024x768"   94.50  1024 1072 1168 1376  768 769 772 808 +hsync +vsync
(**) MGA(0): Default mode "800x600": 56.3 MHz, 53.7 kHz, 85.1 Hz
(II) MGA(0): Modeline "800x600"   56.30  800 832 896 1048  600 601 604 631 +hsync +vsync
(**) MGA(0): Default mode "640x480": 74.2 MHz, 85.9 kHz, 85.1 Hz (D)
(II) MGA(0): Modeline "640x480"   74.25  640 672 752 864  480 480 482 505 doublescan +hsync +vsync
(==) MGA(0): DPI set to (75, 75)
(II) MGA(0): YDstOrg is set to 0
(II) Loading sub module "fb"
(II) LoadModule: "fb"
(II) Loading /usr/X11R6/lib/modules/libfb.a
(II) Module fb: vendor="The XFree86 Project"
    compiled for 4.2.1, module version = 1.0.0
    ABI class: XFree86 ANSI C Emulation, version 0.1
(II) Loading sub module "xaa"
(II) LoadModule: "xaa"
(II) Loading /usr/X11R6/lib/modules/libxaa.a
(II) Module xaa: vendor="The XFree86 Project"
    compiled for 4.2.1, module version = 1.0.0
    ABI class: XFree86 Video Driver, version 0.5
(II) Loading sub module "ramdac"
(II) LoadModule: "ramdac"
(II) Loading /usr/X11R6/lib/modules/libramdac.a
(II) Module ramdac: vendor="The XFree86 Project"
    compiled for 4.2.1, module version = 0.1.0
    ABI class: XFree86 Video Driver, version 0.5
(II) do I need RAC?  No, I don't.
(II) resource ranges after preInit:
    [0] 0   0xd7000000 - 0xd77fffff (0x800000) MX[B]
    [1] 0   0xd6000000 - 0xd6003fff (0x4000) MX[B]
    [2] 0   0xd4000000 - 0xd5ffffff (0x2000000) MX[B]
    [3] -1  0xffe00000 - 0xffffffff (0x200000) MX[B](B)
    [4] -1  0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
    [5] -1  0x000f0000 - 0x000fffff (0x10000) MX[B]
    [6] -1  0x000c0000 - 0x000effff (0x30000) MX[B]
    [7] -1  0x00000000 - 0x0009ffff (0xa0000) MX[B]
    [8] -1  0xda000000 - 0xda0fffff (0x100000) MX[B]
    [9] -1  0xda100000 - 0xda100fff (0x1000) MX[B]
    [10] -1 0xda101000 - 0xda10107f (0x80) MX[B]
    [11] -1 0xd0000000 - 0xd3ffffff (0x4000000) MX[B]
    [12] -1 0xd7000000 - 0xd77fffff (0x800000) MX[B](B)
    [13] -1 0xd6000000 - 0xd6003fff (0x4000) MX[B](B)
    [14] -1 0xd4000000 - 0xd5ffffff (0x2000000) MX[B](B)
    [15] 0  0x000a0000 - 0x000affff (0x10000) MS[B](OprD)
    [16] 0  0x000b0000 - 0x000b7fff (0x8000) MS[B](OprD)
    [17] 0  0x000b8000 - 0x000bffff (0x8000) MS[B](OprD)
    [18] -1 0x0000ffff - 0x0000ffff (0x1) IX[B]
    [19] -1 0x00000000 - 0x000000ff (0x100) IX[B]
    [20] -1 0x0000ec00 - 0x0000ec7f (0x80) IX[B]
    [21] -1 0x0000e800 - 0x0000e81f (0x20) IX[B]
    [22] -1 0x0000e400 - 0x0000e41f (0x20) IX[B]
    [23] -1 0x0000e000 - 0x0000e00f (0x10) IX[B]
    [24] 0  0x000003b0 - 0x000003bb (0xc) IS[B](OprU)
    [25] 0  0x000003c0 - 0x000003df (0x20) IS[B](OprU)
(==) MGA(0): Write-combining range (0xd4000000,0x2000000)
(II) MGA(0): vgaHWGetIOBase: hwp->IOBase is 0x03d0, hwp->PIOOffset is 0x0000
(--) MGA(0): 16 DWORD fifo
(==) MGA(0): Default visual is TrueColor
(II) MGA(0): [drm] bpp: 16 depth: 16
(II) MGA(0): [drm] Sarea 2200+664: 2864
drmOpenDevice: minor is 0
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
drmOpenDevice: minor is 0
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
drmOpenDevice: minor is 0
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 7, (OK)
drmGetBusid returned ''
(II) MGA(0): [drm] loaded kernel module for "mga" driver
(II) MGA(0): [drm] created "mga" driver at busid "PCI:1:0:0"
(II) MGA(0): [drm] added 8192 byte SAREA at 0xfaa5c000
(II) MGA(0): [drm] mapped SAREA 0xfaa5c000 to 0x40016000
(II) MGA(0): [drm] framebuffer handle = 0xd4000000
(II) MGA(0): [drm] added 1 reserved context for kernel
(II) MGA(0): [agp] Mode 0x1f000201 [AGP 0x1106/0x0305; Card 0x102b/0x0525]
(II) MGA(0): [agp] 12288 kB allocated with handle 0xfca9e000
(II) MGA(0): [agp] WARP microcode handle = 0xd0000000
(II) MGA(0): [agp] WARP microcode mapped at 0x429b0000
(II) MGA(0): [agp] Primary DMA handle = 0xd0008000
(II) MGA(0): [agp] Primary DMA mapped at 0x429b8000
(II) MGA(0): [agp] DMA buffers handle = 0xd0108000
(II) MGA(0): [agp] DMA buffers mapped at 0x42ab8000
(II) MGA(0): [drm] Added 128 65536 byte DMA buffers
(II) MGA(0): [drm] Registers handle = 0xd6000000
(II) MGA(0): [drm] Status handle = 0xfcaa7000
(II) MGA(0): [agp] Status page mapped at 0x40018000
(II) MGA(0): [dri] visual configs initialized
(II) MGA(0): Memory manager initialized to (0,0) (1408,3149)
(II) MGA(0): Largest offscreen area available: 1408 x 2099
(II) MGA(0): Reserved back buffer at offset 0x876000
(II) MGA(0): Reserved depth buffer at offset 0xb48000
(II) MGA(0): Reserved 18328 kb for textures at offset 0xe1a000
(II) MGA(0): Using XFree86 Acceleration Architecture (XAA)
    Screen to screen bit blits
    Solid filled rectangles
    Solid filled trapezoids
    8x8 mono pattern filled rectangles
    8x8 mono pattern filled trapezoids
    Indirect CPU to Screen color expansion
    Screen to Screen color expansion
    Solid Lines
    Dashed Lines
    Scanline Image Writes
    Offscreen Pixmaps
    Setting up tile and stipple cache:
        32 128x128 slots
        16 256x256 slots
        5 512x512 slots
(==) MGA(0): Backing store disabled
(==) MGA(0): Silken mouse enabled
(**) Option "dpms"
(**) MGA(0): DPMS enabled
(II) MGA(0): Using overlay video
(II) MGA(0): X context handle = 0x00000001
(II) MGA(0): [drm] installed DRM signal handler
(II) MGA(0): [DRI] installation complete
(II) MGA(0): [drm] Mapped 128 DMA buffers
(==) MGA(0): Direct rendering enabled
(II) Initializing built-in extension MIT-SHM
(II) Initializing built-in extension XInputExtension
(II) Initializing built-in extension XTEST
(II) Initializing built-in extension XKEYBOARD
(II) Initializing built-in extension LBX
(II) Initializing built-in extension XC-APPGROUP
(II) Initializing built-in extension SECURITY
(II) Initializing built-in extension XINERAMA
(II) Initializing built-in extension XFree86-Bigfont
(II) Initializing built-in extension RENDER
(II) Keyboard "Keyboard1" handled by legacy driver
(**) Option "Protocol" "IMPS/2"
(**) Mouse1: Protocol: "IMPS/2"
(**) Option "CorePointer"
(**) Mouse1: Core Pointer
(**) Option "Device" "/dev/usbmouse"
(**) Option "Buttons" "7"
(**) Option "ZAxisMapping" "4 5"
(**) Mouse1: ZAxisMapping: buttons 4 and 5
(**) Mouse1: Buttons: 7
(II) XINPUT: Adding extended input device "Mouse1" (type: MOUSE)

En dit is de XF86Config-4 die daar bij hoort.

code:

Section "ServerLayout"
    Identifier     "Matrox PowerDesk configured."
    Screen         "screen1" 0 0
    InputDevice    "Keyboard1" "CoreKeyboard"
    InputDevice    "Mouse1" "CorePointer"
EndSection

Section "Files"
    FontPath     "unix/:-1"
EndSection

Section "Module"
    Load  "dbe"
    Load  "v4l"
    Load  "extmod"
    Load  "type1"
    Load  "freetype"
    Load  "glx"
    Load  "dri"
EndSection

Section "ServerFlags"
    Option "allowmouseopenfail"
EndSection

Section "InputDevice"
    Identifier  "Keyboard1"
    Driver      "Keyboard"
    Option      "XkbModel" "pc105"
    Option      "XkbLayout" "us"
    Option      "XkbOptions" ""
EndSection

Section "InputDevice"
    Identifier  "Mouse1"
    Driver      "mouse"
    Option      "Protocol" "IMPS/2"
    Option      "Buttons" "7"
    Option      "Device" "/dev/usbmouse"
    Option      "ZAxisMapping" "4 5"
EndSection

Section "Monitor"
    Identifier   "monitor1"
    VendorName   "Iiyama"
    ModelName    "Iiyama A201HT, VisionMaster Pro 510"
    HorizSync    30.0 - 130.0
    VertRefresh  50.0 - 160.0
    #VertRefresh  85.0-85.0
    ModeLine     "1440x1080" 360.0 1440 1472 1768 1800 1080 1083 1086 1128
    ModeLine     "1024x480" 65.0 1024 1032 1176 1344 480 488 494 563 -hsync -vsync
    ModeLine     "768x576" 50.0 768 832 846 1000 576 590 595 630
    ModeLine     "768x576" 63.1 768 800 960 1024 576 578 590 616
EndSection

Section "Device"
    Identifier  "device1"
    Driver      "mga"
    VendorName  "Matrox"
    BoardName   "Matrox Millennium G450"
    VideoRam    32768
    Option      "DPMS"
    Option      "AGPMode" "true"
    BusID       "PCI:1:0:0"
EndSection

Section "Screen"
    Identifier "screen1"
    Device     "device1"
    Monitor    "monitor1"
    DefaultDepth     16
    SubSection "Display"
        Depth     8
        Modes    "1400x1050" "1280x1024" "1152x864" "1024x768" "800x600" "640x480"
    EndSubSection
    SubSection "Display"
        Depth     15
        Modes    "1400x1050" "1280x1024" "1280x960" "1152x864" "1024x768" "800x600" "640x480"
    EndSubSection
    SubSection "Display"
        Depth     16
        Modes    "1400x1050" "1280x1024" "1152x864" "1024x768" "800x600" "640x480"
    EndSubSection
    SubSection "Display"
        Depth     24
        Modes    "1400x1050" "1280x1024" "1152x864" "1024x768" "800x600" "640x480"
    EndSubSection
EndSection

Section "DRI"
    Mode         0666
EndSection

woensdag 25 september 2002 16:26

Acties:

Lethalis

Hmm, 't is goed mogelijk dat DefaultRefresh een optie van de device driver is.

Maar er staat niets in manpages hierover. Moet ik thuis controleren. Wat ik wel vinden kan:

VertRefresh vertrefresh-range
gives the range(s) of vertical refresh frequencies supported by the monitor. vertrefresh-range may be a comma separated list of either discrete values or ranges of values. A range of values is two values separated by a dash. By default the values are in units of Hz. They may be specified in MHz or kHz if MHz or kHz is added to the end of the line. The data given here is used by the X server to determine if video modes are within the specifications of the monitor. This information should be available in the monitor's handbook. If this entry is omitted, a default range of 43-72Hz is used.

Je zou dus VertRefresh 85 kunnen doen bijvoorbeeld. Dit ipv VertRefresh 50.0 - 160.0. En probeer eens de screen te forceren door bij de modes van 16bpp alleen de gewenste resolutie te laten staan.

Ask yourself if you are happy and then you cease to be.

woensdag 25 september 2002 16:49

Acties:

Alarmnummer

-= Tja =-

Topicstarter

Ik heb al geprobeerd:
VertRefresh 85
VertRefresh 85-85
VertRefresh 85.0
VertRefresh 85.0-85.0

Maar hij pakt hem verder niet.

Ik zal die andere resoluties bij 16bpp even uitzetten.

woensdag 25 september 2002 16:58

Acties:

Alarmnummer

-= Tja =-

Topicstarter

Ik heb dit keer VertRefresh 85.0-160.0 ingesteld en hij hij gaat automatisch door naar 1600x1200@85Hz.

woensdag 25 september 2002 17:11

Acties:

Verwijderd

code:

ModeLine     "1440x1080" 360.0 1440 1472 1768 1800 1080 1083 1086 1128 
ModeLine     "1024x480" 65.0 1024 1032 1176 1344 480 488 494 563 -hsync -vsync 
ModeLine     "768x576" 50.0 768 832 846 1000 576 590 595 630 
ModeLine     "768x576" 63.1 768 800 960 1024 576 578 590 616

Hmm, denk je dat je die dotclock echt gaat halen van 360.0? (eerste modeline hierboven)
Sloop evt je modelines eruit (uitcommenteren), en hou je VertRefresh zo (85.0-160.0).

[ Voor 0% gewijzigd door Verwijderd op 25-09-2002 17:12 . Reden: code te breed.. ]

woensdag 25 september 2002 17:14

Acties:

Alarmnummer

-= Tja =-

Topicstarter

Specs iiyama Vistion Master 510 Pro:
Video Bandwidth: 360 Mhz dotclock
Sync Freq Hor: 30.0-130.0 Khz
Sync Freq Ver: 50.0-160.0 Hz

Maar ik zal het even proberen zonder die modlines.

woensdag 25 september 2002 17:23

Acties:

Alarmnummer

-= Tja =-

Topicstarter

Hij blijft doorschakelen naar 1600x1200@85 Hz

code:

XFree86 Version 4.2.1 / X Window System
(protocol Version 11, revision 0, vendor release 6600)
Release Date: 3 September 2002
    If the server is older than 6-12 months, or if your card is
    newer than the above date, look for a newer version before
    reporting problems.  (See http://www.XFree86.Org/)
Build Operating System: Linux 2.4.18-23mdkenterprise i686 [ELF] 
Module Loader present
Markers: (--) probed, (**) from config file, (==) default setting,
         (++) from command line, (!!) notice, (II) informational,
         (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/XFree86.0.log", Time: Thu Sep 26 17:20:46 2002
(==) Using config file: "/etc/X11/XF86Config-4"
(==) ServerLayout "Matrox PowerDesk configured."
(**) |-->Screen "screen1" (0)
(**) |   |-->Monitor "monitor1"
(**) |   |-->Device "device1"
(**) |-->Input Device "Keyboard1"
(**) Option "XkbModel" "pc105"
(**) XKB: model: "pc105"
(**) Option "XkbLayout" "us"
(**) XKB: layout: "us"
(WW) Option "XkbOptions" requires an string value
(==) Keyboard: CustomKeycode disabled
(**) |-->Input Device "Mouse1"
(**) FontPath set to "unix/:-1"
(==) RgbPath set to "/usr/X11R6/lib/X11/rgb"
(==) ModulePath set to "/usr/X11R6/lib/modules"
(**) Option "AllowMouseOpenFail"
Using vt 7
(--) using VT number 7

(II) Open APM successful
(II) Module ABI versions:
    XFree86 ANSI C Emulation: 0.1
    XFree86 Video Driver: 0.5
    XFree86 XInput driver : 0.3
    XFree86 Server Extension : 0.1
    XFree86 Font Renderer : 0.3
(II) Loader running on linux
(II) LoadModule: "bitmap"
(II) Loading /usr/X11R6/lib/modules/fonts/libbitmap.a
(II) Module bitmap: vendor="The XFree86 Project"
    compiled for 4.2.1, module version = 1.0.0
    Module class: XFree86 Font Renderer
    ABI class: XFree86 Font Renderer, version 0.3
(II) Loading font Bitmap
(II) LoadModule: "pcidata"
(II) Loading /usr/X11R6/lib/modules/libpcidata.a
(II) Module pcidata: vendor="The XFree86 Project"
    compiled for 4.2.1, module version = 0.1.0
    ABI class: XFree86 Video Driver, version 0.5
(II) PCI: Probing config type using method 1
(II) PCI: Config type is 1
(II) PCI: stages = 0x03, oldVal1 = 0x80003c48, mode1Res1 = 0x80000000
(II) PCI: PCI scan (all values are in hex)
(II) PCI: 00:00:0: chip 1106,0305 card 0000,0000 rev 03 class 06,00,00 hdr 00
(II) PCI: 00:01:0: chip 1106,8305 card 0000,0000 rev 00 class 06,04,00 hdr 01
(II) PCI: 00:07:0: chip 1106,0686 card 1106,0000 rev 40 class 06,01,00 hdr 80
(II) PCI: 00:07:1: chip 1106,0571 card 0000,0000 rev 06 class 01,01,8a hdr 00
(II) PCI: 00:07:2: chip 1106,3038 card 0925,1234 rev 1a class 0c,03,00 hdr 00
(II) PCI: 00:07:3: chip 1106,3038 card 0925,1234 rev 1a class 0c,03,00 hdr 00
(II) PCI: 00:07:4: chip 1106,3057 card 0000,0000 rev 40 class 06,00,00 hdr 00
(II) PCI: 00:0c:0: chip 1011,0014 card 0000,0000 rev 21 class 02,00,00 hdr 00
(II) PCI: 00:0d:0: chip 1013,6003 card 1681,a010 rev 01 class 04,01,00 hdr 00
(II) PCI: 01:00:0: chip 102b,0525 card 102b,0641 rev 82 class 03,00,00 hdr 00
(II) PCI: End of PCI scan
(II) LoadModule: "scanpci"
(II) Loading /usr/X11R6/lib/modules/libscanpci.a
(II) Module scanpci: vendor="The XFree86 Project"
    compiled for 4.2.1, module version = 0.1.0
    ABI class: XFree86 Video Driver, version 0.5
(II) UnloadModule: "scanpci"
(II) Unloading /usr/X11R6/lib/modules/libscanpci.a
(II) Host-to-PCI bridge:
(II) PCI-to-ISA bridge:
(II) Host-to-PCI bridge:
(II) PCI-to-PCI bridge:
(II) Bus 0: bridge is at (0:0:0), (-1,0,0), BCTRL: 0x08 (VGA_EN is set)
(II) Bus 0 I/O range:
    [0] -1  0x00000000 - 0x0000ffff (0x10000) IX[B]
(II) Bus 0 non-prefetchable memory range:
    [0] -1  0x00000000 - 0xffffffff (0x0) MX[B]
(II) Bus 0 prefetchable memory range:
    [0] -1  0x00000000 - 0xffffffff (0x0) MX[B]
(II) Bus 1: bridge is at (0:1:0), (0,1,1), BCTRL: 0x0c (VGA_EN is set)
(II) Bus 1 I/O range:
(II) Bus 1 non-prefetchable memory range:
    [0] -1  0xd6000000 - 0xd8ffffff (0x3000000) MX[B]
(II) Bus 1 prefetchable memory range:
    [0] -1  0xd4000000 - 0xd5ffffff (0x2000000) MX[B]
(II) Bus -1: bridge is at (0:7:0), (0,-1,0), BCTRL: 0x08 (VGA_EN is set)
(II) Bus -1 I/O range:
(II) Bus -1 non-prefetchable memory range:
(II) Bus -1 prefetchable memory range:
(II) Bus -1: bridge is at (0:7:4), (-1,-1,0), BCTRL: 0x08 (VGA_EN is set)
(II) Bus -1 I/O range:
    [0] -1  0x00000000 - 0x0000ffff (0x10000) IX[B]
(II) Bus -1 non-prefetchable memory range:
    [0] -1  0x00000000 - 0xffffffff (0x0) MX[B]
(II) Bus -1 prefetchable memory range:
    [0] -1  0x00000000 - 0xffffffff (0x0) MX[B]
(--) PCI:*(1:0:0) Matrox MGA G400 AGP rev 130, Mem @ 0xd4000000/25, 0xd6000000/14, 0xd7000000/23
(II) Addressable bus resource ranges are
    [0] -1  0x00000000 - 0xffffffff (0x0) MX[B]
    [1] -1  0x00000000 - 0x0000ffff (0x10000) IX[B]
(II) OS-reported resource ranges:
    [0] -1  0xffe00000 - 0xffffffff (0x200000) MX[B](B)
    [1] -1  0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
    [2] -1  0x000f0000 - 0x000fffff (0x10000) MX[B]
    [3] -1  0x000c0000 - 0x000effff (0x30000) MX[B]
    [4] -1  0x00000000 - 0x0009ffff (0xa0000) MX[B]
    [5] -1  0x0000ffff - 0x0000ffff (0x1) IX[B]
    [6] -1  0x00000000 - 0x000000ff (0x100) IX[B]
(II) Active PCI resource ranges:
    [0] -1  0xda000000 - 0xda0fffff (0x100000) MX[B]
    [1] -1  0xda100000 - 0xda100fff (0x1000) MX[B]
    [2] -1  0xda101000 - 0xda10107f (0x80) MX[B]
    [3] -1  0xd0000000 - 0xd3ffffff (0x4000000) MX[B]
    [4] -1  0xd7000000 - 0xd77fffff (0x800000) MX[B](B)
    [5] -1  0xd6000000 - 0xd6003fff (0x4000) MX[B](B)
    [6] -1  0xd4000000 - 0xd5ffffff (0x2000000) MX[B](B)
    [7] -1  0x0000ec00 - 0x0000ec7f (0x80) IX[B]
    [8] -1  0x0000e800 - 0x0000e81f (0x20) IX[B]
    [9] -1  0x0000e400 - 0x0000e41f (0x20) IX[B]
    [10] -1 0x0000e000 - 0x0000e00f (0x10) IX[B]
(II) Active PCI resource ranges after removing overlaps:
    [0] -1  0xda000000 - 0xda0fffff (0x100000) MX[B]
    [1] -1  0xda100000 - 0xda100fff (0x1000) MX[B]
    [2] -1  0xda101000 - 0xda10107f (0x80) MX[B]
    [3] -1  0xd0000000 - 0xd3ffffff (0x4000000) MX[B]
    [4] -1  0xd7000000 - 0xd77fffff (0x800000) MX[B](B)
    [5] -1  0xd6000000 - 0xd6003fff (0x4000) MX[B](B)
    [6] -1  0xd4000000 - 0xd5ffffff (0x2000000) MX[B](B)
    [7] -1  0x0000ec00 - 0x0000ec7f (0x80) IX[B]
    [8] -1  0x0000e800 - 0x0000e81f (0x20) IX[B]
    [9] -1  0x0000e400 - 0x0000e41f (0x20) IX[B]
    [10] -1 0x0000e000 - 0x0000e00f (0x10) IX[B]
(II) OS-reported resource ranges after removing overlaps with PCI:
    [0] -1  0xffe00000 - 0xffffffff (0x200000) MX[B](B)
    [1] -1  0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
    [2] -1  0x000f0000 - 0x000fffff (0x10000) MX[B]
    [3] -1  0x000c0000 - 0x000effff (0x30000) MX[B]
    [4] -1  0x00000000 - 0x0009ffff (0xa0000) MX[B]
    [5] -1  0x0000ffff - 0x0000ffff (0x1) IX[B]
    [6] -1  0x00000000 - 0x000000ff (0x100) IX[B]
(II) All system resource ranges:
    [0] -1  0xffe00000 - 0xffffffff (0x200000) MX[B](B)
    [1] -1  0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
    [2] -1  0x000f0000 - 0x000fffff (0x10000) MX[B]
    [3] -1  0x000c0000 - 0x000effff (0x30000) MX[B]
    [4] -1  0x00000000 - 0x0009ffff (0xa0000) MX[B]
    [5] -1  0xda000000 - 0xda0fffff (0x100000) MX[B]
    [6] -1  0xda100000 - 0xda100fff (0x1000) MX[B]
    [7] -1  0xda101000 - 0xda10107f (0x80) MX[B]
    [8] -1  0xd0000000 - 0xd3ffffff (0x4000000) MX[B]
    [9] -1  0xd7000000 - 0xd77fffff (0x800000) MX[B](B)
    [10] -1 0xd6000000 - 0xd6003fff (0x4000) MX[B](B)
    [11] -1 0xd4000000 - 0xd5ffffff (0x2000000) MX[B](B)
    [12] -1 0x0000ffff - 0x0000ffff (0x1) IX[B]
    [13] -1 0x00000000 - 0x000000ff (0x100) IX[B]
    [14] -1 0x0000ec00 - 0x0000ec7f (0x80) IX[B]
    [15] -1 0x0000e800 - 0x0000e81f (0x20) IX[B]
    [16] -1 0x0000e400 - 0x0000e41f (0x20) IX[B]
    [17] -1 0x0000e000 - 0x0000e00f (0x10) IX[B]
(II) LoadModule: "dbe"
(II) Loading /usr/X11R6/lib/modules/extensions/libdbe.a
(II) Module dbe: vendor="The XFree86 Project"
    compiled for 4.2.1, module version = 1.0.0
    Module class: XFree86 Server Extension
    ABI class: XFree86 Server Extension, version 0.1
(II) Loading extension DOUBLE-BUFFER
(II) LoadModule: "v4l"
(II) Loading /usr/X11R6/lib/modules/drivers/linux/v4l_drv.o
(II) Module v4l: vendor="The XFree86 Project"
    compiled for 4.2.1, module version = 0.0.1
    ABI class: XFree86 Video Driver, version 0.5
(II) LoadModule: "extmod"
(II) Loading /usr/X11R6/lib/modules/extensions/libextmod.a
(II) Module extmod: vendor="The XFree86 Project"
    compiled for 4.2.1, module version = 1.0.0
    Module class: XFree86 Server Extension
    ABI class: XFree86 Server Extension, version 0.1
(II) Loading extension SHAPE
(II) Loading extension MIT-SUNDRY-NONSTANDARD
(II) Loading extension BIG-REQUESTS
(II) Loading extension SYNC
(II) Loading extension MIT-SCREEN-SAVER
(II) Loading extension XC-MISC
(II) Loading extension XFree86-VidModeExtension
(II) Loading extension XFree86-Misc
(II) Loading extension XFree86-DGA
(II) Loading extension DPMS
(II) Loading extension FontCache
(II) Loading extension TOG-CUP
(II) Loading extension Extended-Visual-Information
(II) Loading extension XVideo
(II) Loading extension XVideo-MotionCompensation
(II) LoadModule: "type1"
(II) Loading /usr/X11R6/lib/modules/fonts/libtype1.a
(II) Module type1: vendor="The XFree86 Project"
    compiled for 4.2.1, module version = 1.0.1
    Module class: XFree86 Font Renderer
    ABI class: XFree86 Font Renderer, version 0.3
(II) Loading font Type1
(II) Loading font CID
(II) LoadModule: "freetype"
(II) Loading /usr/X11R6/lib/modules/fonts/libfreetype.a
(II) Module freetype: vendor="The XFree86 Project"
    compiled for 4.2.1, module version = 1.1.10
    Module class: XFree86 Font Renderer
    ABI class: XFree86 Font Renderer, version 0.3
(II) Loading font FreeType
(II) LoadModule: "glx"
(II) Loading /usr/X11R6/lib/modules/extensions/libglx.a
(II) Module glx: vendor="The XFree86 Project"
    compiled for 4.2.1, module version = 1.0.0
    ABI class: XFree86 Server Extension, version 0.1
(II) Loading sub module "GLcore"
(II) LoadModule: "GLcore"
(II) Loading /usr/X11R6/lib/modules/extensions/libGLcore.a
(II) Module GLcore: vendor="The XFree86 Project"
    compiled for 4.2.1, module version = 1.0.0
    ABI class: XFree86 Server Extension, version 0.1
(II) Loading extension GLX
(II) LoadModule: "dri"
(II) Loading /usr/X11R6/lib/modules/extensions/libdri.a
(II) Module dri: vendor="The XFree86 Project"
    compiled for 4.2.1, module version = 1.0.0
    ABI class: XFree86 Server Extension, version 0.1
(II) Loading sub module "drm"
(II) LoadModule: "drm"
(II) Loading /usr/X11R6/lib/modules/linux/libdrm.a
(II) Module drm: vendor="The XFree86 Project"
    compiled for 4.2.1, module version = 1.0.0
    ABI class: XFree86 Server Extension, version 0.1
(II) Loading extension XFree86-DRI
(II) LoadModule: "mga"
(II) Loading /usr/X11R6/lib/modules/drivers/mga_drv.o
(II) Module mga: vendor="The XFree86 Project"
    compiled for 4.2.1, module version = 1.1.0
    Module class: XFree86 Video Driver
    ABI class: XFree86 Video Driver, version 0.5
(II) LoadModule: "mouse"
(II) Loading /usr/X11R6/lib/modules/input/mouse_drv.o
(II) Module mouse: vendor="The XFree86 Project"
    compiled for 4.2.1, module version = 1.0.0
    Module class: XFree86 XInput Driver
    ABI class: XFree86 XInput driver, version 0.3
(II) v4l driver for Video4Linux
(II) MGA: driver for Matrox chipsets: mga2064w, mga1064sg, mga2164w,
    mga2164w AGP, mgag100, mgag100 PCI, mgag200, mgag200 PCI, mgag400,
    mgag550
(II) Primary Device is: PCI 01:00:0
(--) Chipset mgag400 found
(II) resource ranges after xf86ClaimFixedResources() call:
    [0] -1  0xffe00000 - 0xffffffff (0x200000) MX[B](B)
    [1] -1  0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
    [2] -1  0x000f0000 - 0x000fffff (0x10000) MX[B]
    [3] -1  0x000c0000 - 0x000effff (0x30000) MX[B]
    [4] -1  0x00000000 - 0x0009ffff (0xa0000) MX[B]
    [5] -1  0xda000000 - 0xda0fffff (0x100000) MX[B]
    [6] -1  0xda100000 - 0xda100fff (0x1000) MX[B]
    [7] -1  0xda101000 - 0xda10107f (0x80) MX[B]
    [8] -1  0xd0000000 - 0xd3ffffff (0x4000000) MX[B]
    [9] -1  0xd7000000 - 0xd77fffff (0x800000) MX[B](B)
    [10] -1 0xd6000000 - 0xd6003fff (0x4000) MX[B](B)
    [11] -1 0xd4000000 - 0xd5ffffff (0x2000000) MX[B](B)
    [12] -1 0x0000ffff - 0x0000ffff (0x1) IX[B]
    [13] -1 0x00000000 - 0x000000ff (0x100) IX[B]
    [14] -1 0x0000ec00 - 0x0000ec7f (0x80) IX[B]
    [15] -1 0x0000e800 - 0x0000e81f (0x20) IX[B]
    [16] -1 0x0000e400 - 0x0000e41f (0x20) IX[B]
    [17] -1 0x0000e000 - 0x0000e00f (0x10) IX[B]
(II) resource ranges after probing:
    [0] -1  0xffe00000 - 0xffffffff (0x200000) MX[B](B)
    [1] -1  0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
    [2] -1  0x000f0000 - 0x000fffff (0x10000) MX[B]
    [3] -1  0x000c0000 - 0x000effff (0x30000) MX[B]
    [4] -1  0x00000000 - 0x0009ffff (0xa0000) MX[B]
    [5] -1  0xda000000 - 0xda0fffff (0x100000) MX[B]
    [6] -1  0xda100000 - 0xda100fff (0x1000) MX[B]
    [7] -1  0xda101000 - 0xda10107f (0x80) MX[B]
    [8] -1  0xd0000000 - 0xd3ffffff (0x4000000) MX[B]
    [9] -1  0xd7000000 - 0xd77fffff (0x800000) MX[B](B)
    [10] -1 0xd6000000 - 0xd6003fff (0x4000) MX[B](B)
    [11] -1 0xd4000000 - 0xd5ffffff (0x2000000) MX[B](B)
    [12] 0  0x000a0000 - 0x000affff (0x10000) MS[B]
    [13] 0  0x000b0000 - 0x000b7fff (0x8000) MS[B]
    [14] 0  0x000b8000 - 0x000bffff (0x8000) MS[B]
    [15] -1 0x0000ffff - 0x0000ffff (0x1) IX[B]
    [16] -1 0x00000000 - 0x000000ff (0x100) IX[B]
    [17] -1 0x0000ec00 - 0x0000ec7f (0x80) IX[B]
    [18] -1 0x0000e800 - 0x0000e81f (0x20) IX[B]
    [19] -1 0x0000e400 - 0x0000e41f (0x20) IX[B]
    [20] -1 0x0000e000 - 0x0000e00f (0x10) IX[B]
    [21] 0  0x000003b0 - 0x000003bb (0xc) IS[B]
    [22] 0  0x000003c0 - 0x000003df (0x20) IS[B]
(II) Setting vga for screen 0.
(II) Loading sub module "vgahw"
(II) LoadModule: "vgahw"
(II) Loading /usr/X11R6/lib/modules/libvgahw.a
(II) Module vgahw: vendor="The XFree86 Project"
    compiled for 4.2.1, module version = 0.1.0
    ABI class: XFree86 Video Driver, version 0.5
(**) MGA(0): Depth 16, (--) framebuffer bpp 16
(==) MGA(0): RGB weight 565
(WW) MGA(0): Option "AGPMode" requires an integer value
(--) MGA(0): Chipset: "mgag400"
(==) MGA(0): Using AGP 1x mode
(--) MGA(0): Linear framebuffer at 0xD4000000
(--) MGA(0): MMIO registers at 0xD6000000
(--) MGA(0): Pseudo-DMA transfer window at 0xD7000000
(==) MGA(0): BIOS at 0xC0000
(--) MGA(0): Video BIOS info block at offset 0x07CC0
(WW) MGA(0): Video BIOS info block not detected!
(II) MGA(0): MGABios.RamdacType = 0x0
(**) MGA(0): VideoRAM: 32768 kByte
(II) Loading sub module "ddc"
(II) LoadModule: "ddc"
(II) Loading /usr/X11R6/lib/modules/libddc.a
(II) Module ddc: vendor="The XFree86 Project"
    compiled for 4.2.1, module version = 1.0.0
    ABI class: XFree86 Video Driver, version 0.5
(II) Loading sub module "i2c"
(II) LoadModule: "i2c"
(II) Loading /usr/X11R6/lib/modules/libi2c.a
(II) Module i2c: vendor="The XFree86 Project"
    compiled for 4.2.1, module version = 1.2.0
    ABI class: XFree86 Video Driver, version 0.5
(==) MGA(0): Write-combining range (0xd4000000,0x2000000)
(II) MGA(0): vgaHWGetIOBase: hwp->IOBase is 0x03d0, hwp->PIOOffset is 0x0000
(II) MGA(0): I2C bus "DDC" initialized.
(II) MGA(0): I2C device "DDC:ddc2" registered.
(II) MGA(0): I2C device "DDC:ddc2" removed.
(II) MGA(0): I2C Monitor info: (nil)
(II) MGA(0): end of I2C Monitor info

(--) MGA(0): No DDC signal
(II) MGA(0): DDC Monitor info: (nil)
(II) MGA(0): end of DDC Monitor info

(==) MGA(0): Using gamma correction (1.0, 1.0, 1.0)
(==) MGA(0): Min pixel clock is 12 MHz
(==) MGA(0): Max pixel clock is 360 MHz
(II) MGA(0): monitor1: Using hsync range of 30.00-130.00 kHz
(II) MGA(0): monitor1: Using vrefresh range of 85.00-160.00 Hz
(II) MGA(0): Clock range:  12.00 to 360.00 MHz
(II) MGA(0): Not using default mode "640x480" (vrefresh out of range)
(II) MGA(0): Not using default mode "320x240" (vrefresh out of range)
(II) MGA(0): Not using default mode "640x480" (vrefresh out of range)
(II) MGA(0): Not using default mode "320x240" (vrefresh out of range)
(II) MGA(0): Not using default mode "640x480" (vrefresh out of range)
(II) MGA(0): Not using default mode "320x240" (vrefresh out of range)
(II) MGA(0): Not using default mode "800x600" (vrefresh out of range)
(II) MGA(0): Not using default mode "400x300" (vrefresh out of range)
(II) MGA(0): Not using default mode "800x600" (vrefresh out of range)
(II) MGA(0): Not using default mode "400x300" (vrefresh out of range)
(II) MGA(0): Not using default mode "800x600" (vrefresh out of range)
(II) MGA(0): Not using default mode "400x300" (vrefresh out of range)
(II) MGA(0): Not using default mode "800x600" (vrefresh out of range)
(II) MGA(0): Not using default mode "400x300" (vrefresh out of range)
(II) MGA(0): Not using default mode "1024x768" (vrefresh out of range)
(II) MGA(0): Not using default mode "512x384" (vrefresh out of range)
(II) MGA(0): Not using default mode "1024x768" (vrefresh out of range)
(II) MGA(0): Not using default mode "512x384" (vrefresh out of range)
(II) MGA(0): Not using default mode "1024x768" (vrefresh out of range)
(II) MGA(0): Not using default mode "512x384" (vrefresh out of range)
(II) MGA(0): Not using default mode "1152x864" (vrefresh out of range)
(II) MGA(0): Not using default mode "576x432" (vrefresh out of range)
(II) MGA(0): Not using default mode "1280x960" (vrefresh out of range)
(II) MGA(0): Not using default mode "640x480" (vrefresh out of range)
(II) MGA(0): Not using default mode "1280x1024" (vrefresh out of range)
(II) MGA(0): Not using default mode "640x512" (vrefresh out of range)
(II) MGA(0): Not using default mode "1280x1024" (vrefresh out of range)
(II) MGA(0): Not using default mode "640x512" (vrefresh out of range)
(II) MGA(0): Not using default mode "1600x1200" (vrefresh out of range)
(II) MGA(0): Not using default mode "800x600" (vrefresh out of range)
(II) MGA(0): Not using default mode "1600x1200" (vrefresh out of range)
(II) MGA(0): Not using default mode "800x600" (vrefresh out of range)
(II) MGA(0): Not using default mode "1600x1200" (vrefresh out of range)
(II) MGA(0): Not using default mode "800x600" (vrefresh out of range)
(II) MGA(0): Not using default mode "1600x1200" (vrefresh out of range)
(II) MGA(0): Not using default mode "800x600" (vrefresh out of range)
(II) MGA(0): Not using default mode "1792x1344" (vrefresh out of range)
(II) MGA(0): Not using default mode "896x672" (vrefresh out of range)
(II) MGA(0): Not using default mode "1792x1344" (vrefresh out of range)
(II) MGA(0): Not using default mode "896x672" (vrefresh out of range)
(II) MGA(0): Not using default mode "1856x1392" (vrefresh out of range)
(II) MGA(0): Not using default mode "928x696" (vrefresh out of range)
(II) MGA(0): Not using default mode "1856x1392" (vrefresh out of range)
(II) MGA(0): Not using default mode "928x696" (vrefresh out of range)
(II) MGA(0): Not using default mode "1920x1440" (vrefresh out of range)
(II) MGA(0): Not using default mode "960x720" (vrefresh out of range)
(II) MGA(0): Not using default mode "1920x1440" (vrefresh out of range)
(II) MGA(0): Not using default mode "960x720" (vrefresh out of range)
(II) MGA(0): Not using default mode "832x624" (vrefresh out of range)
(II) MGA(0): Not using default mode "416x312" (vrefresh out of range)
(II) MGA(0): Not using default mode "1400x1050" (vrefresh out of range)
(II) MGA(0): Not using default mode "700x525" (vrefresh out of range)
(II) MGA(0): Not using default mode "1400x1050" (vrefresh out of range)
(II) MGA(0): Not using default mode "700x525" (vrefresh out of range)
(II) MGA(0): Not using default mode "1600x1024" (vrefresh out of range)
(II) MGA(0): Not using default mode "800x512" (vrefresh out of range)
(II) MGA(0): Not using mode "1400x1050" (no mode of this name)
(--) MGA(0): Has SDRAM
(--) MGA(0): Virtual size is 1600x1200 (pitch 1600)
(**) MGA(0): Default mode "1600x1200": 229.5 MHz, 106.2 kHz, 85.0 Hz
(II) MGA(0): Modeline "1600x1200"  229.50  1600 1664 1856 2160  1200 1201 1204 1250 +hsync +vsync
(**) MGA(0): Default mode "1280x1024": 157.5 MHz, 91.1 kHz, 85.0 Hz
(II) MGA(0): Modeline "1280x1024"  157.50  1280 1344 1504 1728  1024 1025 1028 1072 +hsync +vsync
(**) MGA(0): Default mode "1280x960": 148.5 MHz, 85.9 kHz, 85.0 Hz
(II) MGA(0): Modeline "1280x960"  148.50  1280 1344 1504 1728  960 961 964 1011 +hsync +vsync
(**) MGA(0): Default mode "1024x768": 94.5 MHz, 68.7 kHz, 85.0 Hz
(II) MGA(0): Modeline "1024x768"   94.50  1024 1072 1168 1376  768 769 772 808 +hsync +vsync
(**) MGA(0): Default mode "1024x768": 44.9 MHz, 35.5 kHz, 87.1 Hz (I)
(II) MGA(0): Modeline "1024x768"   44.90  1024 1032 1208 1264  768 768 776 817 interlace +hsync +vsync
(**) MGA(0): Default mode "800x600": 56.3 MHz, 53.7 kHz, 85.1 Hz
(II) MGA(0): Modeline "800x600"   56.30  800 832 896 1048  600 601 604 631 +hsync +vsync
(**) MGA(0): Default mode "800x600": 114.8 MHz, 106.2 kHz, 85.0 Hz (D)
(II) MGA(0): Modeline "800x600"  114.75  800 832 928 1080  600 600 602 625 doublescan +hsync +vsync
(**) MGA(0): Default mode "640x512": 78.8 MHz, 91.1 kHz, 85.0 Hz (D)
(II) MGA(0): Modeline "640x512"   78.75  640 672 752 864  512 512 514 536 doublescan +hsync +vsync
(**) MGA(0): Default mode "640x480": 74.2 MHz, 85.9 kHz, 85.1 Hz (D)
(II) MGA(0): Modeline "640x480"   74.25  640 672 752 864  480 480 482 505 doublescan +hsync +vsync
(**) MGA(0): Default mode "640x480": 36.0 MHz, 43.3 kHz, 85.0 Hz
(II) MGA(0): Modeline "640x480"   36.00  640 696 752 832  480 481 484 509 -hsync -vsync
(**) MGA(0): Default mode "720x400": 35.5 MHz, 37.9 kHz, 85.0 Hz
(II) MGA(0): Modeline "720x400"   35.50  720 756 828 936  400 401 404 446 -hsync +vsync
(**) MGA(0): Default mode "640x400": 31.5 MHz, 37.9 kHz, 85.1 Hz
(II) MGA(0): Modeline "640x400"   31.50  640 672 736 832  400 401 404 445 -hsync +vsync
(**) MGA(0): Default mode "640x350": 31.5 MHz, 37.9 kHz, 85.1 Hz
(II) MGA(0): Modeline "640x350"   31.50  640 672 736 832  350 382 385 445 +hsync -vsync
(**) MGA(0): Default mode "512x384": 47.2 MHz, 68.7 kHz, 85.0 Hz (D)
(II) MGA(0): Modeline "512x384"   47.25  512 536 584 688  384 384 386 404 doublescan +hsync +vsync
(**) MGA(0): Default mode "512x384": 22.4 MHz, 35.5 kHz, 87.1 Hz (D)
(II) MGA(0): Modeline "512x384"   22.45  512 516 604 632  384 384 388 409 interlace doublescan +hsync +vsync
(**) MGA(0): Default mode "400x300": 28.1 MHz, 53.7 kHz, 85.3 Hz (D)
(II) MGA(0): Modeline "400x300"   28.15  400 416 448 524  300 300 302 315 doublescan +hsync +vsync
(**) MGA(0): Default mode "320x240": 18.0 MHz, 43.3 kHz, 85.2 Hz (D)
(II) MGA(0): Modeline "320x240"   18.00  320 348 376 416  240 240 242 254 doublescan -hsync -vsync
(**) MGA(0): Default mode "360x200": 17.8 MHz, 37.9 kHz, 85.0 Hz (D)
(II) MGA(0): Modeline "360x200"   17.75  360 378 414 468  200 200 202 223 doublescan -hsync +vsync
(**) MGA(0): Default mode "320x200": 15.8 MHz, 37.9 kHz, 85.3 Hz (D)
(II) MGA(0): Modeline "320x200"   15.75  320 336 368 416  200 200 202 222 doublescan -hsync +vsync
(**) MGA(0): Default mode "320x175": 15.8 MHz, 37.9 kHz, 85.3 Hz (D)
(II) MGA(0): Modeline "320x175"   15.75  320 336 368 416  175 191 192 222 doublescan +hsync -vsync
(==) MGA(0): DPI set to (75, 75)
(II) MGA(0): YDstOrg is set to 0
(II) Loading sub module "fb"
(II) LoadModule: "fb"
(II) Loading /usr/X11R6/lib/modules/libfb.a
(II) Module fb: vendor="The XFree86 Project"
    compiled for 4.2.1, module version = 1.0.0
    ABI class: XFree86 ANSI C Emulation, version 0.1
(II) Loading sub module "xaa"
(II) LoadModule: "xaa"
(II) Loading /usr/X11R6/lib/modules/libxaa.a
(II) Module xaa: vendor="The XFree86 Project"
    compiled for 4.2.1, module version = 1.0.0
    ABI class: XFree86 Video Driver, version 0.5
(II) Loading sub module "ramdac"
(II) LoadModule: "ramdac"
(II) Loading /usr/X11R6/lib/modules/libramdac.a
(II) Module ramdac: vendor="The XFree86 Project"
    compiled for 4.2.1, module version = 0.1.0
    ABI class: XFree86 Video Driver, version 0.5
(II) do I need RAC?  No, I don't.
(II) resource ranges after preInit:
    [0] 0   0xd7000000 - 0xd77fffff (0x800000) MX[B]
    [1] 0   0xd6000000 - 0xd6003fff (0x4000) MX[B]
    [2] 0   0xd4000000 - 0xd5ffffff (0x2000000) MX[B]
    [3] -1  0xffe00000 - 0xffffffff (0x200000) MX[B](B)
    [4] -1  0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
    [5] -1  0x000f0000 - 0x000fffff (0x10000) MX[B]
    [6] -1  0x000c0000 - 0x000effff (0x30000) MX[B]
    [7] -1  0x00000000 - 0x0009ffff (0xa0000) MX[B]
    [8] -1  0xda000000 - 0xda0fffff (0x100000) MX[B]
    [9] -1  0xda100000 - 0xda100fff (0x1000) MX[B]
    [10] -1 0xda101000 - 0xda10107f (0x80) MX[B]
    [11] -1 0xd0000000 - 0xd3ffffff (0x4000000) MX[B]
    [12] -1 0xd7000000 - 0xd77fffff (0x800000) MX[B](B)
    [13] -1 0xd6000000 - 0xd6003fff (0x4000) MX[B](B)
    [14] -1 0xd4000000 - 0xd5ffffff (0x2000000) MX[B](B)
    [15] 0  0x000a0000 - 0x000affff (0x10000) MS[B](OprD)
    [16] 0  0x000b0000 - 0x000b7fff (0x8000) MS[B](OprD)
    [17] 0  0x000b8000 - 0x000bffff (0x8000) MS[B](OprD)
    [18] -1 0x0000ffff - 0x0000ffff (0x1) IX[B]
    [19] -1 0x00000000 - 0x000000ff (0x100) IX[B]
    [20] -1 0x0000ec00 - 0x0000ec7f (0x80) IX[B]
    [21] -1 0x0000e800 - 0x0000e81f (0x20) IX[B]
    [22] -1 0x0000e400 - 0x0000e41f (0x20) IX[B]
    [23] -1 0x0000e000 - 0x0000e00f (0x10) IX[B]
    [24] 0  0x000003b0 - 0x000003bb (0xc) IS[B](OprU)
    [25] 0  0x000003c0 - 0x000003df (0x20) IS[B](OprU)
(==) MGA(0): Write-combining range (0xd4000000,0x2000000)
(II) MGA(0): vgaHWGetIOBase: hwp->IOBase is 0x03d0, hwp->PIOOffset is 0x0000
(--) MGA(0): 16 DWORD fifo
(==) MGA(0): Default visual is TrueColor
(II) MGA(0): [drm] bpp: 16 depth: 16
(II) MGA(0): [drm] Sarea 2200+664: 2864
drmOpenDevice: minor is 0
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
drmOpenDevice: minor is 0
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
drmOpenDevice: minor is 0
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 7, (OK)
drmGetBusid returned ''
(II) MGA(0): [drm] loaded kernel module for "mga" driver
(II) MGA(0): [drm] created "mga" driver at busid "PCI:1:0:0"
(II) MGA(0): [drm] added 8192 byte SAREA at 0xfaa5c000
(II) MGA(0): [drm] mapped SAREA 0xfaa5c000 to 0x40016000
(II) MGA(0): [drm] framebuffer handle = 0xd4000000
(II) MGA(0): [drm] added 1 reserved context for kernel
(II) MGA(0): [agp] Mode 0x1f000201 [AGP 0x1106/0x0305; Card 0x102b/0x0525]
(II) MGA(0): [agp] 12288 kB allocated with handle 0xfca9e000
(II) MGA(0): [agp] WARP microcode handle = 0xd0000000
(II) MGA(0): [agp] WARP microcode mapped at 0x429b0000
(II) MGA(0): [agp] Primary DMA handle = 0xd0008000
(II) MGA(0): [agp] Primary DMA mapped at 0x429b8000
(II) MGA(0): [agp] DMA buffers handle = 0xd0108000
(II) MGA(0): [agp] DMA buffers mapped at 0x42ab8000
(II) MGA(0): [drm] Added 128 65536 byte DMA buffers
(II) MGA(0): [drm] Registers handle = 0xd6000000
(II) MGA(0): [drm] Status handle = 0xfcaa7000
(II) MGA(0): [agp] Status page mapped at 0x40018000
(II) MGA(0): [dri] visual configs initialized
(II) MGA(0): Memory manager initialized to (0,0) (1600,2400)
(II) MGA(0): Largest offscreen area available: 1600 x 1200
(II) MGA(0): Reserved back buffer at offset 0x754000
(II) MGA(0): Reserved depth buffer at offset 0xafe000
(II) MGA(0): Reserved 17760 kb for textures at offset 0xea8000
(II) MGA(0): Using XFree86 Acceleration Architecture (XAA)
    Screen to screen bit blits
    Solid filled rectangles
    Solid filled trapezoids
    8x8 mono pattern filled rectangles
    8x8 mono pattern filled trapezoids
    Indirect CPU to Screen color expansion
    Screen to Screen color expansion
    Solid Lines
    Dashed Lines
    Scanline Image Writes
    Offscreen Pixmaps
    Setting up tile and stipple cache:
        32 128x128 slots
        19 256x256 slots
(==) MGA(0): Backing store disabled
(==) MGA(0): Silken mouse enabled
(**) Option "dpms"
(**) MGA(0): DPMS enabled
(II) MGA(0): Using overlay video
(II) MGA(0): X context handle = 0x00000001
(II) MGA(0): [drm] installed DRM signal handler
(II) MGA(0): [DRI] installation complete
(II) MGA(0): [drm] Mapped 128 DMA buffers
(==) MGA(0): Direct rendering enabled
(II) Initializing built-in extension MIT-SHM
(II) Initializing built-in extension XInputExtension
(II) Initializing built-in extension XTEST
(II) Initializing built-in extension XKEYBOARD
(II) Initializing built-in extension LBX
(II) Initializing built-in extension XC-APPGROUP
(II) Initializing built-in extension SECURITY
(II) Initializing built-in extension XINERAMA
(II) Initializing built-in extension XFree86-Bigfont
(II) Initializing built-in extension RENDER
(II) Keyboard "Keyboard1" handled by legacy driver
(**) Option "Protocol" "IMPS/2"
(**) Mouse1: Protocol: "IMPS/2"
(**) Option "CorePointer"
(**) Mouse1: Core Pointer
(**) Option "Device" "/dev/usbmouse"
(**) Option "Buttons" "7"
(**) Option "ZAxisMapping" "4 5"
(**) Mouse1: ZAxisMapping: buttons 4 and 5
(**) Mouse1: Buttons: 7
(II) XINPUT: Adding extended input device "Mouse1" (type: MOUSE)

XF86Config-4

code:

Section "ServerLayout"
    Identifier     "Matrox PowerDesk configured."
    Screen         "screen1" 0 0
    InputDevice    "Keyboard1" "CoreKeyboard"
    InputDevice    "Mouse1" "CorePointer"
EndSection

Section "Files"
    FontPath     "unix/:-1"
EndSection

Section "Module"
    Load  "dbe"
    Load  "v4l"
    Load  "extmod"
    Load  "type1"
    Load  "freetype"
    Load  "glx"
    Load  "dri"
EndSection

Section "ServerFlags"
    Option "allowmouseopenfail"
EndSection

Section "InputDevice"
    Identifier  "Keyboard1"
    Driver      "Keyboard"
    Option      "XkbModel" "pc105"
    Option      "XkbLayout" "us"
    Option      "XkbOptions" ""
EndSection

Section "InputDevice"
    Identifier  "Mouse1"
    Driver      "mouse"
    Option      "Protocol" "IMPS/2"
    Option      "Buttons" "7"
    Option      "Device" "/dev/usbmouse"
    Option      "ZAxisMapping" "4 5"
EndSection

Section "Monitor"
    Identifier   "monitor1"
    VendorName   "Iiyama"
    ModelName    "Iiyama A201HT, VisionMaster Pro 510"
    HorizSync    30.0 - 130.0
    #VertRefresh  50.0 - 160.0
    VertRefresh  85.0-160.0
    #ModeLine     "1440x1080" 360.0 1440 1472 1768 1800 1080 1083 1086 1128
    #ModeLine     "1024x480" 65.0 1024 1032 1176 1344 480 488 494 563 -hsync -vsync
    #ModeLine     "768x576" 50.0 768 832 846 1000 576 590 595 630
    #ModeLine     "768x576" 63.1 768 800 960 1024 576 578 590 616
EndSection

Section "Device"
    Identifier  "device1"
    Driver      "mga"
    VendorName  "Matrox"
    BoardName   "Matrox Millennium G450"
    VideoRam    32768
    Option      "DPMS"
    Option      "AGPMode" "true"
    BusID       "PCI:1:0:0"
EndSection

Section "Screen"
    Identifier "screen1"
    Device     "device1"
    Monitor    "monitor1"
    DefaultDepth     16
    SubSection "Display"
        Depth     8
        Modes    "1400x1050" "1280x1024" "1152x864" "1024x768" "800x600" "640x480"
    EndSubSection
    SubSection "Display"
        Depth     15
        Modes    "1400x1050" "1280x1024" "1280x960" "1152x864" "1024x768" "800x600" "640x480"
    EndSubSection
    SubSection "Display"
        Depth     16
        Modes    "1400x1050" #"1280x1024" "1152x864" "1024x768" "800x600" "640x480"
    EndSubSection
    SubSection "Display"
        Depth     24
        Modes    "1400x1050" "1280x1024" "1152x864" "1024x768" "800x600" "640x480"
    EndSubSection
EndSection

Section "DRI"
    Mode         0666
EndSection

woensdag 25 september 2002 23:10

Acties:

Verwijderd

Ik weet er ook niet veel van, maar ik zie wel dat je het volgende in de errors hebt:
Dat was nadat het je gelukt was die (welke? 1080 of 1050 vertikaal?) resolutie te draaien, maar slechts op 76 Hz...

code:

(II) MGA(0): monitor1: Using hsync range of 30.00-130.00 kHz
(II) MGA(0): monitor1: Using vrefresh range of 50.00-160.00 Hz
(II) MGA(0): Clock range:  12.00 to 360.00 MHz
(II) MGA(0): Not using mode "1440x1080" (hsync out of range)
(--) MGA(0): Has SDRAM
(--) MGA(0): Virtual size is 1400x1050 (pitch 1408)
(**) MGA(0): Default mode "1400x1050": 155.8 MHz, 81.5 kHz, 74.8 Hz
(II) MGA(0): Modeline "1400x1050"  155.80  1400 1464 1784 1912  1050 1052 1064 1090 +hsync +vsync

Kan je niet kijken of je die modeline voor 1400x1050 kunt aanpassen? En hij heeft dus problemen met de hsync van die 1440x1080....
Dus daar heb je ook nog wat te proberen.
Oh ja, je kan aan het eind van die regel nog
+hsync +vsync
of
-hsync -vsync
toevoegen.

Creativiteit en met vallen en opstaan...
Veel succes!

(Overigens, ik begrijp dat je als windowsgebruiker nu niet echt blij bent met 'dat geweldige linux'...
Helaas is jouw huidige situatie voor sommige systemen met linux de realiteit.
Ik heb zelf ook de nodige problemen gehad (niet onoverkomelijk, maar ik was een ruime week bezig om het goed te krijgen, dus om na een dag of wat al de boel op te geven, .... hier op NOS wel steun en support gevonden, maar het meeste uitzoekwerk heb ik zelf gedaan als newbie...incl. kernels compileren enzo... vind mezelf ook niet helemaal newbie meer..), ik hoop dat het je lukt, of dat iemand je de oplossing kan geven.
Misschien zou mdk9.0 final soulaas kunnen bieden, als niets anders helpt?)

woensdag 25 september 2002 23:16

Acties:

Verwijderd

In je log valt te zien dat de mode 1400x1050 niet herkent wordt (no mode of this name). Volgens mij is dit ook geen VESA standaard. Dan schiet hij naar de eerstvolgende wel herkenbare mode en dat is 1600x1200.

Overigens staat er in mijn XF86config in alle kleurdieptes maar een mode i.p.v. de zes bij de jouwe. Misschien dat je ook kunt proberen om de overbodige modes te verwijderen.

grt.
Marco

donderdag 26 september 2002 02:00

Acties:

Buffy

Fire bad, Tree pretty

Probeer deze modlines eens:

code:

# 1400 x 1050 @ 114.6 Hz, 125.702 kHz hsync
ModeLine        "1400x1050" 358 1400 1464 1720 2848 1050 1052 1071 1097

# 1400 x 1080 @ 111.5 Hz, 125.702 kHz hsync
ModeLine        "1400x1080" 358 1400 1464 2720 2848 1080 1082 1101 1127

Deze zijn gemaakt op basis van deze specs:

code:

1
2
3

Dotclock     12.00 - 360.00 MHz
Hsysnc       30.00 - 130.00 kHz
Vrefresh     50.00 - 160 Hz

Als je monitor niet aan deze specs voldoet (met name de dotclock/bandwidth) en er komt rook uit: It ain't my fault

_{Modelines voor lagere dotclocks/refreshrates kan je berekenen mbv dit octave script bestRR.m.}

That which doesn't kill us, makes us stranger - Trevor (AEon FLux)
When a finger points at the moon, the imbecile looks at the finger (Chinese Proverb)

donderdag 26 september 2002 08:57

Acties:

Lethalis

Nogmaals: verwijder bij je screens eens alle resoluties behalve degene die jij wilt. Dan gaat hij óf naar de juiste resolutie óf hij start niet eens op. In het eerste geval: feest vieren. In het tweede geval: het probleem achterhalen. Zoals Marco al oppert, is die resolutie niet standaard. Dit zou een goede reden kunnen zijn voor het probleem.

Ask yourself if you are happy and then you cease to be.

vrijdag 27 september 2002 11:29

Acties:

Alarmnummer

-= Tja =-

Topicstarter

Eindelijk maar toch is het gelukt. Ik heb een Modeline gecopieerd uit mijn X logbestand en daar de dotclock verhoogt van 155 naar 200 en ik zit nu op 1400x1040@95 Hz.

Ik gooi ook meteen even mijn modeline hier neer zodat ik hem de volgende keer weer kan gebruiken

Modeline "1400x1050@95" 200.80 1400 1464 1784 1912 1050 1052 1064 1090 +hsync +vsync
Modeline "1400x1050@85" 180.80 1400 1464 1784 1912 1050 1052 1064 1090 +hsync +vsync

vrijdag 27 september 2002 12:21

Acties:

riotrick

Alarmnummer schreef op 27 september 2002 @ 11:29:
Eindelijk maar toch is het gelukt. Ik heb een Modeline gecopieerd uit mijn X logbestand en daar de dotclock verhoogt van 155 naar 200 en ik zit nu op 1400x1040@95 Hz.

Ik gooi ook meteen even mijn modeline hier neer zodat ik hem de volgende keer weer kan gebruiken

GoT Backup System(tm)

vrijdag 27 september 2002 12:23

Acties:

Verwijderd

Goh, ik wist niet dat dat kon.
Weer wat geleerd

Pagina: 1

Reageer