inhoud dmesg:
Linux version 2.4.7-10 (root@localhost.localdomain) (gcc version 2.96 20000731 (Red Hat Linux 7.1 2.96-98)) #1 Thu Dec 13 18:09:08 EST 2001
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 0000000000080000 (usable)
BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 000000001dfec000 (usable)
BIOS-e820: 000000001dfec000 - 000000001dfef000 (ACPI data)
BIOS-e820: 000000001dfef000 - 000000001dfff000 (reserved)
BIOS-e820: 000000001dfff000 - 000000001e000000 (ACPI NVS)
BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
BIOS-e820: 00000000ffff0000 - 0000000100000000 (reserved)
On node 0 totalpages: 122860
zone(0): 4096 pages.
zone(1): 118764 pages.
zone(2): 0 pages.
Found and enabled local APIC!
Kernel command line: auto BOOT_IMAGE=linux ro root=806 BOOT_FILE=/boot/vmlinuz-2.4.7-10
Initializing CPU#0
Detected 1403.186 MHz processor.
Console: colour VGA+ 80x25
Calibrating delay loop... 2798.38 BogoMIPS
Memory: 478224k/491440k available (1275k kernel code, 10640k reserved, 91k data, 232k init, 0k highmem)
Dentry-cache hash table entries: 65536 (order: 7, 524288 bytes)
Inode-cache hash table entries: 32768 (order: 6, 262144 bytes)
Mount-cache hash table entries: 8192 (order: 4, 65536 bytes)
Buffer-cache hash table entries: 32768 (order: 5, 131072 bytes)
Page-cache hash table entries: 131072 (order: 8, 1048576 bytes)
CPU: Before vendor init, caps: 0383fbff c1cbfbff 00000000, vendor = 2
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#0.
CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
CPU: L2 Cache: 256K (64 bytes/line)
CPU: After vendor init, caps: 0383fbff c1cbfbff 00000000 00000000
CPU: After generic, caps: 0383fbff c1cbfbff 00000000 00000000
CPU: Common caps: 0383fbff c1cbfbff 00000000 00000000
CPU: AMD Athlon(TM) XP 1600+ stepping 02
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Checking 'hlt' instruction... OK.
POSIX conformance testing by UNIFIX
mtrr: v1.40 (20010327) Richard Gooch (rgooch@atnf.csiro.au)
mtrr: detected mtrr type: Intel
PCI: PCI BIOS revision 2.10 entry at 0xf1a70, last bus=2
PCI: Using configuration type 1
PCI: Probing PCI hardware
Unknown bridge resource 0: assuming transparent
PCI: Using IRQ router default [10de/01b2] at 00:01.0
isapnp: Scanning for PnP cards...
isapnp: No Plug & Play device found
Linux NET4.0 for Linux 2.4
Based upon Swansea University Computer Society NET3.039
Initializing RT netlink socket
Simple Boot Flag extension found and enabled.
apm: BIOS version 1.2 Flags 0x03 (Driver version 1.14)
Starting kswapd v1.8
VFS: Diskquotas version dquot_6.5.0 initialized
Detected PS/2 Mouse Port.
pty: 2048 Unix98 ptys configured
Serial driver version 5.05c (2001-07-08) with MANY_PORTS MULTIPORT SHARE_IRQ SERIAL_PCI ISAPNP enabled
ttyS00 at 0x03f8 (irq = 4) is a 16550A
ttyS01 at 0x02f8 (irq = 3) is a 16550A
Real Time Clock Driver v1.10d
block: queued sectors max/low 317445kB/186373kB, 960 slots per queue
RAMDISK driver initialized: 16 RAM disks of 4096K size 1024 blocksize
Uniform Multi-Platform E-IDE driver Revision: 6.31
ide: Assuming 33MHz PCI bus speed for PIO modes; override with idebus=xx
PCI_IDE: unknown IDE controller on PCI bus 00 device 48, VID=10de, DID=01bc
PCI_IDE: chipset revision 195
PCI_IDE: not 100% native mode: will probe irqs later
ide0: BM-DMA at 0xa800-0xa807, BIOS settings: hda:pio, hdb:pio
ide1: BM-DMA at 0xa808-0xa80f, BIOS settings: hdc:pio, hdd:pio
ide-floppy driver 0.97
floppy0: no floppy controllers found
ide-floppy driver 0.97
md: md driver 0.90.0 MAX_MD_DEVS=256, MD_SB_DISKS=27
md: Autodetecting RAID arrays.
md: autorun ...
md: ... autorun DONE.
NET4: Linux TCP/IP 1.0 for NET4.0
IP Protocols: ICMP, UDP, TCP, IGMP
IP: routing cache hash table of 4096 buckets, 32Kbytes
TCP: Hash tables configured (established 32768 bind 32768)
Linux IP multicast router 0.06 plus PIM-SM
NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
RAMDISK: Compressed image found at block 0
Freeing initrd memory: 425k freed
VFS: Mounted root (ext2 filesystem).
SCSI subsystem driver Revision: 1.00
Device Driver for HPT37x2 ATA RAID Controller
Version 1.32, Compiled Jun 27 2002 18:03:07
Found Controller: HPT370 UDMA/ATA100 RAID Controller
scsi0 : hpt37x2
Vendor: HPT Inc. Model: HPT37x2 RAID 1 Rev: 1.05
Type: Direct-Access ANSI SCSI revision: 02
Attached scsi disk sda at scsi0, channel 0, id 0, lun 0
SCSI device sda: 78177792 512-byte hdwr sectors (40027 MB)
Partition check:
sda:hpt37x2: Mirror rebuild started.
sda1 sda2 sda3 sda4 < sda5 sda6 sda7 >
Journalled Block Device driver loaded
kjournald starting. Commit interval 5 seconds
EXT3-fs: mounted filesystem with ordered data mode.
Freeing unused kernel memory: 232k freed
Adding Swap: 979924k swap-space (priority -1)
EXT3 FS 2.4-0.9.8, 25 Aug 2001 on sd(8,6), internal journal
kjournald starting. Commit interval 5 seconds
EXT3 FS 2.4-0.9.8, 25 Aug 2001 on sd(8,1), internal journal
EXT3-fs: mounted filesystem with ordered data mode.
kjournald starting. Commit interval 5 seconds
EXT3 FS 2.4-0.9.8, 25 Aug 2001 on sd(8,3), internal journal
EXT3-fs: mounted filesystem with ordered data mode.
kjournald starting. Commit interval 5 seconds
EXT3 FS 2.4-0.9.8, 25 Aug 2001 on sd(8,2), internal journal
EXT3-fs: mounted filesystem with ordered data mode.
kjournald starting. Commit interval 5 seconds
EXT3 FS 2.4-0.9.8, 25 Aug 2001 on sd(8,7), internal journal
EXT3-fs: mounted filesystem with ordered data mode.
:strip_exif()/u/53713/avatar.gif?f=community){kind=avatar}
/u/30766/e0.png?f=community)