Toon posts:

Nat-tabel kwijt

Pagina: 1
Acties:

Verwijderd

Topicstarter
goedenavond,

ik heb een getweaked adsl modem.
hierbij heb ik geprobeerd wat porten te mappen, zodat ik een spelletje kon hosten.
na enig gekloot had ik het zover gekregen dat ik die hele NAT-list kwijt was en dat m'n internet niet meer werkte, maar wel mijn msn. 8)7
Na de firewall gedisabled te hebben, kon ik weer internetten.

Nu is mijn vraag of jullie weten hoe ik weer aan een knappe NAT-list kom.

bvd,

  • Erkens
  • Registratie: December 2001
  • Niet online

Erkens

Fotograaf

kan je hem niet resetten en alles opnieuw instellen maar dan goed?

Verwijderd

Topicstarter
Er zit geen mogelijkheid op die router tot resetten ervan. Misschien softwarematig, dat zou ik nog even moeten bekijken.

thnx voor de tip iig

Verwijderd

Op bijgeleverde cd-rom staan de standaard scripts volgens mij.
Dat zijn die planet en xs4all cd-rommetjes oid.

  • SpaceDok
  • Registratie: Juli 2001
  • Laatst online: 20:35
RTFM!

Introduction
Procedure
At the back of the STHome there is a small push button labeled
"Defaults".
Via this button a hardware reset of the STHome, the
SwitchtoDefaults, is possible.
Proceed as follows:
1. Make sure your STHome is turned on.
2. Use a pencil to press the push button at the back of the STHome.
3. Release the button. Via the flashing front panel LEDs, you will
notice that the STHome will reboot.
Wait to allow the POST to end. The STHome will come online
with manufacturing defaults.
4. After a reset to original defaults a reconfiguration of
STHome's IP address might be necessary. This because the
reset to defaults also resets your STHome's IP address to its
default value 10.0.0.138.

Succes

Geloof niets van wat je hoort en de helft van wat je ziet...