[X] Ati Radeon - Linux en overige clients

vrijdag 23 augustus 2002 15:07

Acties:

Verwijderd

Topicstarter

Peeps...

heb hier een Dell Inspiron 4100 met een Ati Radeon drin zitten. Heb X gecompiled enzo, geconfigt, met als driver "radeon" opgegeven. Even kernel gerecompiled met de radeon als module.

Als ik dan startx doen krijg ik:

code:

XFree86 Version 4.2.0 / X Window System
(protocol Version 11, revision 0, vendor release 6600)
Release Date: 18 January 2002
        If the server is older than 6-12 months, or if your card is
        newer than the above date, look for a newer version before
        reporting problems.  (See http://www.XFree86.Org/)
Build Operating System: Linux 2.4.19 i686 [ELF]
Module Loader present
Markers: (--) probed, (**) from config file, (==) default setting,
         (++) from command line, (!!) notice, (II) informational,
         (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/XFree86.0.log", Time: Fri Aug 23 15:00:38 2002
(==) Using config file: "/etc/X11/XF86Config"
(EE) Failed to load module "radeon" (module does not exist, 0)
(EE) No devices detected.

grmbl... modprobe radeon dan maar, geen foutmeldingen, gaat ok. in /lib/modules/2.4.19/kernel/drivers/char/drm staat de module ook netjes klaar.

ik zeg :

vrijdag 23 augustus 2002 15:12

Acties:

JeffG

Bestaat deze? /usr/X11R6/lib/modules/dri/radeon_dri.so ??
Want dat is de module die wordt gezocht. In /lib/modules/2.4.19/kernel/drivers/char/drm staan modules voor de kernel.

vrijdag 23 augustus 2002 15:17

Acties:

Verwijderd

Topicstarter

JeffG schreef op 23 augustus 2002 @ 15:12:
Bestaat deze? /usr/X11R6/lib/modules/dri/radeon_dri.so ??
Want dat is de module die wordt gezocht. In /lib/modules/2.4.19/kernel/drivers/char/drm staan modules voor de kernel.

koel, dat wissik nie, maar:

code:

1 2	root@hondekop:/usr/X11R6/lib/modules/dri# ls radeon_dri.so

vrijdag 23 augustus 2002 15:49

Acties:

JeffG

Vreemd, dan weet ik het ook niet

Probeer dit nog is, ik denk niet dat het werkt, maar je weet nooit

code:

1 2	XFree86 -configure XFree86 -xf86config XF86Config.new

vrijdag 23 augustus 2002 15:51

Acties:

deadinspace

The what goes where now?

Tgaat niet om de kernel module maar de radeon module gok ik... Wat staat er in /usr/X11R6/lib/modules/driver/ ?

Zucht [/laat]

vrijdag 23 augustus 2002 16:05

Acties:

Verwijderd

Topicstarter

JeffG schreef op 23 augustus 2002 @ 15:49:
Vreemd, dan weet ik het ook niet Probeer dit nog is, ik denk niet dat het werkt, maar je weet nooit
code:
1
2
XFree86 -configure
XFree86 -xf86config XF86Config.new

Ok:

code:

root@hondekop:/usr/X11R6/lib/modules/dri# XFree86 -configure

XFree86 Version 4.2.0 / X Window System
(protocol Version 11, revision 0, vendor release 6600)
Release Date: 18 January 2002
        If the server is older than 6-12 months, or if your card is
        newer than the above date, look for a newer version before
        reporting problems.  (See http://www.XFree86.Org/)
Build Operating System: Linux 2.4.19 i686 [ELF]
Module Loader present
Markers: (--) probed, (**) from config file, (==) default setting,
         (++) from command line, (!!) notice, (II) informational,
         (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/XFree86.0.log", Time: Fri Aug 23 16:03:05 2002
List of video drivers:
        vga
        vesa
        v4l
(++) Using config file: "/root/XF86Config.new"


XFree86 detected your mouse at device /dev/mouse.
Please check your config if the mouse is still not
operational, as by default XFree86 tries to autodetect
the protocol.

Your XF86Config file is /root/XF86Config.new

To test the server, run 'XFree86 -xf86config /root/XF86Config.new'

Als driver wil ie dus niet de radeon zien. Als nu XFree86 -xf86config /root/XF86Config.new doe dan krijg ik een zwart fel flikkerend scherm met een hele grote cursor....

vrijdag 23 augustus 2002 19:52

Acties:

Verwijderd

Topicstarter

een subtiel schopje... meestal linux nerds zijn nu toch wel een keer wakker

vrijdag 23 augustus 2002 20:11

Acties:

Shunt

Boe

schoppen binnen 23 uur wordt niet gewardeerd op got

maar probeer eens de driver te herdllen

Game PC
2 Post or Not 2 Post What's the question ?
"If it ain't broken, you didn't try hard enough"

vrijdag 23 augustus 2002 20:14

Acties:

Verwijderd

Topicstarter

Shunt schreef op 23 augustus 2002 @ 20:11:
schoppen binnen 23 uur wordt niet gewardeerd op got maar probeer eens de driver te herdllen

die zit standaard bij X, heb niks apart gedownload.

vrijdag 23 augustus 2002 20:16

Acties:

Shunt

Boe

dan zou ik de drivers van ati zelf eens dllen zal een stuk beter werken

Game PC
2 Post or Not 2 Post What's the question ?
"If it ain't broken, you didn't try hard enough"

vrijdag 23 augustus 2002 20:22

Acties:

Verwijderd

Topicstarter

Shunt schreef op 23 augustus 2002 @ 20:16:
dan zou ik de drivers van ati zelf eens dllen zal een stuk beter werken

mjah, wel vaag, heb al 5 keer eerder linux op deze labtop gehad... ineens wil het niet

vrijdag 23 augustus 2002 20:23

Acties:

Shunt

Boe

jah das vreemd jah

Game PC
2 Post or Not 2 Post What's the question ?
"If it ain't broken, you didn't try hard enough"

vrijdag 23 augustus 2002 22:06

Acties:

Verwijderd

Topicstarter

ok.... langzaam aan wordt ik gek :

code:

root@hondekop:/usr/X11R6/lib# startx


XFree86 Version 4.2.0 / X Window System
(protocol Version 11, revision 0, vendor release 6600)
Release Date: 18 January 2002
        If the server is older than 6-12 months, or if your card is
        newer than the above date, look for a newer version before
        reporting problems.  (See http://www.XFree86.Org/)
Build Operating System: Linux 2.4.19 i686 [ELF]
Module Loader present
Markers: (--) probed, (**) from config file, (==) default setting,
         (++) from command line, (!!) notice, (II) informational,
         (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/XFree86.0.log", Time: Fri Aug 23 22:03:50 2002
(==) Using config file: "/etc/X11/XF86Config"
(EE) Failed to load module "ati" (module does not exist, 0)
(EE) No devices detected.

Fatal server error:
no screens found

When reporting a problem related to a server crash, please send
the full server output, not just the last messages.
This can be found in the log file "/var/log/XFree86.0.log".
Please report problems to xfree86@xfree86.org.

XIO:  fatal IO error 104 (Connection reset by peer) on X server ":0.0"
      after 0 requests (0 known processed) with 0 events remaining.p

mwah.... ok... ff de atil module opzoeken in "(==) Using config file: "/etc/X11/XF86Config", daar zou ie dus in moeten staan :

code:

root@hondekop:/usr/X11R6/lib# cat /etc/X11/XF86Config
# XFree86 4.0 configuration generated by Xconfigurator

Section "ServerLayout"
Identifier "XFree86 Configured"
Screen 0 "Screen0" 0 0
InputDevice "Mouse0" "CorePointer"
InputDevice "Keyboard0" "CoreKeyboard"
EndSection

# By default, Red Hat Linux 6.0 and later use xfs

Section "Files"
FontPath "unix/:7100"
EndSection

# Module loading section

Section "Module"
Load "dbe" # Double-buffering
Load "GLcore" # OpenGL support
Load "dri" # Direct rendering infrastructure
Load "glx" # OpenGL X protocol interface
Load "extmod" # Misc. required extensions
Load "v4l" # Video4Linux
# Load "pex5" # PHIGS for X 3D environment (obsolete)
# Load "record" # X event recorder
# Load "xie" # X Image Extension (obsolete)
# You only need the following two modules if you do not use xfs.
# Load "freetype" # TrueType font handler
# Load "type1" # Adobe Type 1 font handler
EndSection

Section "InputDevice"
Identifier "Keyboard0"
Driver "keyboard"
Option "XkbLayout" "us"
EndSection

Section "InputDevice"
Identifier "Mouse0"
Driver "mouse"
Option "Device" "/dev/mouse"
Option "Protocol" "IMPS/2"
Option "Emulate3Buttons" "off"
Option "ZAxisMapping" "4 5"
EndSection

Section "Monitor"
Identifier "Generic Laptop Display Panel 1400x1050"
VendorName "Unknown"
ModelName "Unknown"
HorizSync 31.5-90
VertRefresh 59-75
Option "dpms"
EndSection

Section "Device"
Identifier "ATI Radeon (generic)"
Driver "radeon"
BoardName "Unknown"
Option "nodri"
EndSection

Section "Device"
Identifier "Linux Frame Buffer"
Driver "fbdev"
BoardName "Unknown"
EndSection

Section "Screen"
Identifier "Screen0"
Device "ATI Radeon (generic)"
Monitor "Generic Laptop Display Panel 1400x1050"
DefaultDepth 24
Subsection "Display"
Depth 24
Modes "1024x768"
EndSubSection
EndSection

Section "DRI"
Mode 0666
EndSection

Ikke geen ati module geladen zien worden !! ook in /usr/X11R6 geen symlinks of wat dan ook....

vrijdag 23 augustus 2002 22:18

Acties:

Solarsparc

code:

1 2	(II) LoadModule: "ati" (II) Loading /usr/X11R6/lib/modules/drivers/ati_drv.o

En het enige "radeon-achtige" wat ik geselecteerd heb is Driver "radeon".

Ik post ff mijn XF86Config, hij's simpel maar werkt pefect, probeer hem eens letterlijk over te nemen (pas wel op de input config - kheb een extra USB muis erin staan):

code:

Section "ServerLayout"
    Identifier     "XFree86 Configured"
    Screen      0  "Screen0" 0 0
    InputDevice    "Mouse0" "CorePointer"
    InputDevice    "Keyboard0" "CoreKeyboard"
    InputDevice    "USB mouse" "SendCoreEvents"
EndSection

Section "Files"
    RgbPath      "/usr/X11R6/lib/X11/rgb"
    ModulePath   "/usr/X11R6/lib/modules"
    FontPath     "/usr/X11R6/lib/X11/fonts/misc/"
    FontPath     "/usr/X11R6/lib/X11/fonts/Speedo/"
    FontPath     "/usr/X11R6/lib/X11/fonts/Type1/"
    FontPath     "/usr/X11R6/lib/X11/fonts/CID/"
    FontPath     "/usr/X11R6/lib/X11/fonts/75dpi/"
    FontPath     "/usr/X11R6/lib/X11/fonts/100dpi/"
EndSection

Section "Module"
    Load  "extmod"
    Load  "GLcore"
    Load  "glx"
    Load  "drm"
    Load  "dri"
    Load  "dbe"
    Load  "record"
    Load  "xtrap"
    Load  "speedo"
    Load  "type1"
    Load  "fbdevhw"
EndSection

Section "InputDevice"
    Identifier  "Keyboard0"
    Driver      "keyboard"
    Option      "XkbRules" "xfree86"
    Option      "XkbModel" "pc105"
    Option      "XkbLayout" "fr"
EndSection

Section "InputDevice"
    Identifier  "Mouse0"
    Driver      "mouse"
    Option      "Protocol" "PS/2"
    Option      "Device" "/dev/mouse"
        Option "ZAxisMapping" "4 5"
 EndSection

Section "InputDevice"
        Identifier  "USB Mouse"
    Driver      "mouse"
    Option      "Device"    "/dev/input/mice"
    Option      "Protocol"  "IMPS/2"
    Option      "Emulate3Buttons"   "no"
    Option      "ZAxisMapping" "4 5"
EndSection

Section "Monitor"
    Identifier   "Monitor0"
    VendorName   "Monitor Vendor"
    ModelName    "Monitor Model"
EndSection

Section "Device"
        ### Available Driver options are:-
        ### Values: <i>: integer, <f>: float, <bool>: "True"/"False",
        ### <string>: "String", <freq>: "<f> Hz/kHz/MHz"
        ### [arg]: arg optional
        #Option     "NoAccel"               # [<bool>]
        #Option     "SWcursor"              # [<bool>]
        #Option     "Dac6Bit"               # [<bool>]
        #Option     "Dac8Bit"               # [<bool>]
        #Option     "ForcePCIMode"          # [<bool>]
        #Option     "CPPIOMode"             # [<bool>]
        #Option     "CPusecTimeout"         # <i>
        #Option     "AGPMode"               # <i>
        #Option     "AGPSize"               # <i>
        #Option     "RingSize"              # <i>
        #Option     "BufferSize"            # <i>
        #Option     "EnableDepthMoves"      # [<bool>]
        #Option     "CrtScreen"             # [<bool>]
        #Option     "PanelSize"             # [<str>]
        #Option     "UseFBDev"              # [<bool>]
    Identifier  "Card0"
    Driver      "radeon"
    VendorName  "ATI"
    BoardName   "Radeon Mobility M6 LY"
    BusID       "PCI:1:0:0"
    VideoRam    16384
    Option      "AGPMode" "2"
EndSection

Section "Screen"
    Identifier "Screen0"
    Device     "Card0"
    Monitor    "Monitor0"
    DefaultColorDepth 24
    SubSection "Display"
        Depth     1
    EndSubSection
    SubSection "Display"
        Depth     4
    EndSubSection
    SubSection "Display"
        Depth     8
    EndSubSection
    SubSection "Display"
        Depth     15
    EndSubSection
    SubSection "Display"
        Depth     24
        Modes   "1024x768" "800x600" "640x480"
    EndSubSection
    SubSection "Display"
        Depth     16
    EndSubSection
EndSection

Section "DRI"
    mode 0666
EndSection

vrijdag 23 augustus 2002 22:23

Acties:

Verwijderd

Topicstarter

Solarsparc schreef op 23 augustus 2002 @ 22:18:
veel spul

code:

XFree86 Version 4.2.0 / X Window System
(protocol Version 11, revision 0, vendor release 6600)
Release Date: 18 January 2002
        If the server is older than 6-12 months, or if your card is
        newer than the above date, look for a newer version before
        reporting problems.  (See http://www.XFree86.Org/)
Build Operating System: Linux 2.4.19 i686 [ELF]
Module Loader present
Markers: (--) probed, (**) from config file, (==) default setting,
         (++) from command line, (!!) notice, (II) informational,
         (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/XFree86.0.log", Time: Fri Aug 23 22:21:03 2002
(==) Using config file: "/etc/X11/XF86Config"
(EE) LoadModule: Module fbdevhw does not have a fbdevhwModuleData data object.
(EE) Failed to load module "fbdevhw" (invalid module, 0)
(EE) Failed to load module "ati" (module does not exist, 0)
(EE) No drivers available.

Fatal server error:
no screens found

When reporting a problem related to a server crash, please send
the full server output, not just the last messages.
This can be found in the log file "/var/log/XFree86.0.log".
Please report problems to xfree86@xfree86.org.

XIO:  fatal IO error 104 (Connection reset by peer) on X server ":0.0"
      after 0 requests (0 known processed) with 0 events remaining.
root@hondekop:/usr/X11R6/lib#

bijna zelfde verhaal dus, ik snap dr nu echt geen ruk meer van...

vrijdag 23 augustus 2002 22:28

Acties:

Solarsparc

code:

1	/usr/X11R6/lib/modules/drivers/ati_drv.o

En die heb je wel?

vrijdag 23 augustus 2002 22:30

Acties:

Verwijderd

Topicstarter

Solarsparc schreef op 23 augustus 2002 @ 22:28:
code:
1
/usr/X11R6/lib/modules/drivers/ati_drv.o
En die heb je wel?

nee, die heb ik niet, maar ik wil toch ook de radeon gebruiken ?

code:

1 2	root@hondekop:/usr/X11R6/lib/modules/drivers# ls atimisc_drv.o linux radeon_drv.o vesa_drv.o vga_drv.o

vrijdag 23 augustus 2002 22:35

Acties:

Solarsparc

Voor zover ik kan zien, laadt ie beide, eerst ati en dan radeon.

Waar zijn al jouw drivers heen?

Di's mijn output namelijk:

code:

bash-2.05a# cd /usr/X11R6/lib/modules/drivers/
bash-2.05a# ls
apm_drv.o        fbdev_drv.o     r128_drv.o           tga_drv.o
ark_drv.o        glint_drv.o     radeon_drv.o         trident_drv.o
ati_drv.o        i128_drv.o      rendition_drv.o      tseng_drv.o
atimisc_drv.o    i740_drv.o      s3_drv.o             vesa_drv.o
chips_drv.o      i810_drv.o      s3virge_drv.o        vga_drv.o
cirrus_alpine.o  linux           savage_drv.o         vmware_drv.o
cirrus_drv.o     mga_drv.o       siliconmotion_drv.o
cirrus_laguna.o  neomagic_drv.o  sis_drv.o
cyrix_drv.o      nv_drv.o        tdfx_drv.o

Probeer anders ff uit je install dir die modules te kopieren oid.