Dag allemaal (dit is eerste post 
)
Ik heb thuis een netwerkje gebouwd met freesco. Een 486, daarachter 8 poorts hub en momenteel 4 pc's. Wij hebben telenet (België).
Ik heb bij instellingen van freesco de proxy van telenet ingevuld, toch moet ik bij de clients die nog eens invullen als ik wil kunnen surfen. Niet zo'n probleem misschien, maar nu krijg ik icq en internet op linuxbak niet fatsoenlijk niet aan de praat. Wat doe ik fout? Ik zal hieronder de instellingen van freesco plakken.
Hartelijk bedankt
----- cat /etc/system.cfg -----
# [System]
ROUTER=ethernet# 0.dialup/leased/ethernet/bridge
HOSTNAME=router#711.Router name
DOMAIN=netwerk#712.(Local) domain name
ENAMSQ=y # 11.Enable NAT and firewall
ENABRG=n # 12.Enable bridging mode? DONT TOUCH!!!
BIGMEM=n # 13.If 16+MB RAM start ppp bsd compression
SAVERS= # 14.Savers - screen(min),hdd(x5 sec) 0 -off
SWPSIZE=0# 15.Swap size in Kb on boot device. 0 - off
LOGSIZE=# 16.System_log,logins_log sizes (bytes)
DEFISP=# 6.Default dialup ISP
# [Services] # y - worldwide/s - local/n - disable
ENADNS=s #411.Enable caching DNS server
LOGDNS=n#412.Enable debug info
ENADHCP=s #421.Enable DHCP server
WINSADDR=#422.WINS address (for DHCP server)
LIZTIME=86400,86400#423.default-lease-time,max-lease-time
ENAWWW=n #431.Enable Public HTTP Server
WWWPORT=80 #432.on port
ENAWWA=s #441.Enable Time Server and control via HTTP
WWAPORT=82 #442.on port
TIMADDR=#443.Host timeserver address, empty - disable
TIMZONE=+0400#444.Offset to UTC (-1200 -:- +1200)
ENALPD=s #451.Enable Print Server
LPPORT1=515#452.on port
LPDEV1=lp1#453.on output device
LPPORT2=#454.Second lp server on port, empty - disable
LPDEV2=lp2#455.on output device
ENATEL=s# 46.Enable telnet server
# [Security]
TRUSTLN=p #211.Trust local nets y/n/p{artual}
TRUSTMD=y#212.Modem links have access to local networks
RINGS=2,7#220.Rings before answer at login,nologin time
MonTIM=""#221.Nologin times for modem users
TueTIM=""#222
WedTIM=""#223
ThuTIM=""#224
FriTIM=""#225
SatTIM=""#226
SunTIM=""#227
# [Modems]
MODEM0= # 51.1st modem
MSPEED0=# 52.port's speed
MINIT0=""# 53.init string
MTU0=#541.Maximum Transmit Unit
MRU0=#542.Maximum Receive Unit
MADDR0=192.168.168.2# 55.ppp link remote addr (for dialin purpose)
MODEM1= # 61
MSPEED1=# 62
MINIT1=""# 63
MTU1=#641
MRU1=#642
MADDR1=192.168.168.3# 65.I said for dialin purpose.
# [leased line router]
ADRTYPE=dynamic #921.if ISP supplies us with dynamic IP, then:
LOCAL=127.0.0.2 #922.fake local side ppp IP addr
REMOTE=127.0.0.3 #923.fake remote addr
# [ethernet/leased/printer/ras router]
GATEWAY=#911.Default gateway, if exist.
DNSADDR=195.130.132.17#912.Primary DNS address for ethernet connection
DNSADDR1=195.130.132.18#913.Secondary DNS address for ethernet connection
PROXY="proxy.pandora.be:8080"#914.HTTP proxy addr[:port]
# [Hardware]
IO0=0x300#811.1st ethernet card I/O address
IRQ0=10#812.IRQ line
IO1=0#821
IRQ1=0#822
IO2=0#831
IRQ2=0#832
# [Networks]
USEDHCP0=y#720.Use DHCP client to config this interface
INTNAME0=eth0#721.Interface name (eth0|arc0e|arc0)
DHCPLOG=n#722.Enable DHCP client messages in the log
DHCPDNS=y#723 Enable auto configuration of DNS via DHCP
IPADDR0=*.*.*.*#724.IP adress of this interface
NETMASK0=255.255.254.0 #725.Network mask
NETWORK0=213.118.96.0# Network address
BRDCAST0=213.118.97.255# Broadcast address
#726.IP pool, empty disables DHCP on this interface
IPRANGE0=""
INTNAME1=eth1#731.Interface name (eth1|eth0:1|arc0e|arc0 etc)
IPADDR1=192.168.0.1#732. Second network
NETMASK1=255.255.255.0
NETWORK1=192.168.0.0
BRDCAST1=192.168.0.255
IPRANGE1="192.168.0.2 192.168.0.8"
INTNAME2=#74x. Third network
IPADDR2=
NETMASK2=
NETWORK2=
BRDCAST2=
IPRANGE2=""
----- cat /etc/live.cfg -----
VER=0.2.7
bootdev=fd0
UPTIME="Thu Mar 14 10:36:58 2002"
RENEW=1
IPADDR0=*.*.*.*
NETMASK0=255.255.255.0
BRDCAST0=213.119.133.255
NETWORK0=213.119.133.0
GATEWAY=213.119.133.1
DNSADDR=195.130.132.18
DNSADDR1=195.130.132.25
UPDATE=1
DONE="echo Done"
----- cat /etc/dhcpc/dhcpcd-eth0.info -----
IPADDR=*.*.*.*
NETMASK=255.255.255.0
NETWORK=213.119.133.0
BROADCAST=213.119.133.255
GATEWAY=213.119.133.1
DOMAIN=pandora.be
DNS=195.130.132.18,195.130.132.25
DHCPSID=195.130.132.17
DHCPGIADDR=213.118.91.1
DHCPSIADDR=195.130.132.17
DHCPCHADDR=00:50:BA:F0:F2:FE
DHCPSHADDR=00:E0:0C:B2:ED:DB
DHCPSNAME=
LEASETIME=3600
RENEWALTIME=1800
REBINDTIME=1860
----- cat /etc/forward.cfg -----
#_47x._[Port_forwarding_AKA_export_services]
#_
#_tcp|udp,incoming_port,local_computer_IP_addr/port
#_
#_Example:_t,80,192.168.168.2/80
#_this_will_open_worldwide_web_server_on_local_computer_192.168.168.2
#_
#_Example:_t,21,192.168.168.3/21
#_this_will_open_worldwide_ftp_server_on_local_computer_192.168.168.2
#_
#_Comment_must_be_on_separate_line_start_with_"#_"_and_should_not_have_spaces
----- cat /etc/banlist.cfg -----
#_23._[List_of_banned_hosts/nets_one_record_per_line]
#_
#_local|external,IP_addr[/netmask_or_netbits_if_baning_a_whole_net]
#_
#_Example:_l,123.124.125.0/24_ban_local_net
#_Example:_e,123.124.125.0/255.255.255.0_ban_external_net
#_Example:_l,10.0.0.123_ban_local_host
#_
#_Comment_must_be_on_separat_lines_start_with_"#_"_and_should_not_have_spaces
----- sed -n 1,/AUTH/P /etc/chat.pwd -----
----- lsmod -----
ModulePagesUsed by
/tmp/net/rtl8139.o.C 31
/tmp/prm/ne.o.A1 21
ip_masq_ftp 10
ip_masq_irc 10
ip_masq_quake 10
ip_masq_vdolive 10
ip_masq_raudio 10
ip_masq_icq 10
ip_masq_cuseeme 10
8390 2[/tmp/prm/ne.o.A1]0
----- dmesg | grep eth -----
NE*000 ethercard probe at 0xff80: 00 50 ba f0 f2 fe
eth0: NE2000 found at 0xff80, using IRQ 11.
eth1: RealTek RTL8139 Fast Ethernet at 0xfc00, IRQ 9, 00:48:54:55:ab:0c.
----- ifconfig -----
lo Link encap:Local Loopback
inet addr:127.0.0.1 Bcast:127.255.255.255 Mask:255.0.0.0
UP BROADCAST LOOPBACK RUNNING MTU:3584 Metric:1
RX packets:5 errors:0 dropped:0 overruns:0
TX packets:5 errors:0 dropped:0 overruns:0
eth0 Link encap:10Mbps Ethernet HWaddr 00:50:BA:F0:F2:FE
inet addr:213.119.133.189 Bcast:213.119.133.255 Mask:255.255.255.0
UP BROADCAST NOTRAILERS RUNNING MTU:1500 Metric:1
RX packets:26148 errors:0 dropped:0 overruns:0
TX packets:21875 errors:0 dropped:0 overruns:0
Interrupt:11 Base address:0xff80
eth1 Link encap:10Mbps Ethernet HWaddr 00:48:54:55:AB:0C
inet addr:192.168.0.1 Bcast:192.168.0.255 Mask:255.255.255.0
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:25292 errors:0 dropped:0 overruns:0
TX packets:28684 errors:0 dropped:0 overruns:0
Interrupt:9 Base address:0xfc00
----- cat /proc/interrupts -----
0: 1436011 timer
1: 8 keyboard
2: 0 cascade
6: 113 + floppy
8: 1 + rtc
9: 50455 eth1
11: 42322 NE2000
13: 0 math error
----- cat /proc/ioports -----
0000-001f : dma1
0020-003f : pic1
0040-005f : timer
0060-006f : keyboard
0070-007f : rtc
0080-009f : dma page reg
00a0-00bf : pic2
00c0-00df : dma2
00f0-00ff : npu
02f8-02ff : serial(auto)
0378-037f : lp
03c0-03df : vga+
03f0-03f5 : floppy
03f7-03f7 : floppy DIR
03f8-03ff : serial(auto)
fc00-fc7f : eth1
ff80-ff9f : NE2000
----- route -n -----
Kernel routing table
Destination Gateway Genmask Flags MSS Window Use Iface
255.255.255.255 * 255.255.255.255 UH 1500 0 3 eth1
213.119.133.0 * 255.255.255.0 U 1500 0 14 eth0
192.168.0.0 * 255.255.255.0 U 1500 0 3 eth1
127.0.0.0 * 255.0.0.0 U 3584 0 1 lo
default 213.119.133.1 * UG 1500 0 66 eth0
----- cat /etc/dhcpd.leases -----
----- free -----
total: used: free: shared: buffers: cached:
Mem: 15147008 8765440 6381568 4431872 2985984 1130496
Swap: 0 0 0
MemTotal: 14792 kB
MemFree: 6232 kB
MemShared: 4328 kB
Buffers: 2916 kB
Cached: 1104 kB
SwapTotal: 0 kB
SwapFree: 0 kB
Mounted FS:
/dev/root / ext2 rw 0 0
/proc /proc proc rw 0 0
/dev/fd0 /mnt umsdos rw 0 0
Filesystem 1024-blocks Used Available Capacity Mounted on
/dev/ram0 2548 1535 1013 60% /
/dev/fd0 1424 1374 50 97% /mnt
----- ps -----
PidStat ParentNameCommand
1 S0initinitauto
2 S1kflushd
3 S1kswapd
4 S1logrotatesh/bin/logrotate
6 S1syslogdsyslogd-r-h-m0
8 S1klogdklogd
19 S1daemonsh/bin/daemon-agetty 9600 tty2
24 S19agettyagetty9600tty2
134 S1dhcpcddhcpcd-R-t600-c/etc/renew-hroutereth0
177 S1namednamed
199 S1dhcpddhcpd-qeth1
339 S1lpdlpd-n1-p515-o/dev/lp1
342 S1thttpdthttpd-p82-uroot-d/wwa-l/dev/null
345 S1daemonsh/bin/daemon-telnetd -debug
347 S345telnetdtelnetd-debug
371 S1daemonsh/bin/daemon-agetty 9600 tty1
373 S371agettyagetty9600tty1
5758 Z342usr.cgi
5760 Z342usr.cgi
5761 Z342usr.cgi
5762 Z342usr.cgi
5775 Z342usr.cgi
5781 S4sleepsleep10
5782 S342usr.cgishusr.cgiinfo
5783 S5782sysinfosh/bin/sysinfo
5784 S5782sedseds/</\<\;/g;s/>/\>\;/g
5811 R5783pssh/bin/ps
----- cat /etc/ppp/opt* -----
asyncmap 0
----- setserial -bg /dev/cua? -----
/dev/cua0 at 0x03f8 (irq = 4) is a 16550A
/dev/cua1 at 0x02f8 (irq = 3) is a 16550A
)Ik heb thuis een netwerkje gebouwd met freesco. Een 486, daarachter 8 poorts hub en momenteel 4 pc's. Wij hebben telenet (België).
Ik heb bij instellingen van freesco de proxy van telenet ingevuld, toch moet ik bij de clients die nog eens invullen als ik wil kunnen surfen. Niet zo'n probleem misschien, maar nu krijg ik icq en internet op linuxbak niet fatsoenlijk niet aan de praat. Wat doe ik fout? Ik zal hieronder de instellingen van freesco plakken.
Hartelijk bedankt
----- cat /etc/system.cfg -----
# [System]
ROUTER=ethernet# 0.dialup/leased/ethernet/bridge
HOSTNAME=router#711.Router name
DOMAIN=netwerk#712.(Local) domain name
ENAMSQ=y # 11.Enable NAT and firewall
ENABRG=n # 12.Enable bridging mode? DONT TOUCH!!!
BIGMEM=n # 13.If 16+MB RAM start ppp bsd compression
SAVERS= # 14.Savers - screen(min),hdd(x5 sec) 0 -off
SWPSIZE=0# 15.Swap size in Kb on boot device. 0 - off
LOGSIZE=# 16.System_log,logins_log sizes (bytes)
DEFISP=# 6.Default dialup ISP
# [Services] # y - worldwide/s - local/n - disable
ENADNS=s #411.Enable caching DNS server
LOGDNS=n#412.Enable debug info
ENADHCP=s #421.Enable DHCP server
WINSADDR=#422.WINS address (for DHCP server)
LIZTIME=86400,86400#423.default-lease-time,max-lease-time
ENAWWW=n #431.Enable Public HTTP Server
WWWPORT=80 #432.on port
ENAWWA=s #441.Enable Time Server and control via HTTP
WWAPORT=82 #442.on port
TIMADDR=#443.Host timeserver address, empty - disable
TIMZONE=+0400#444.Offset to UTC (-1200 -:- +1200)
ENALPD=s #451.Enable Print Server
LPPORT1=515#452.on port
LPDEV1=lp1#453.on output device
LPPORT2=#454.Second lp server on port, empty - disable
LPDEV2=lp2#455.on output device
ENATEL=s# 46.Enable telnet server
# [Security]
TRUSTLN=p #211.Trust local nets y/n/p{artual}
TRUSTMD=y#212.Modem links have access to local networks
RINGS=2,7#220.Rings before answer at login,nologin time
MonTIM=""#221.Nologin times for modem users
TueTIM=""#222
WedTIM=""#223
ThuTIM=""#224
FriTIM=""#225
SatTIM=""#226
SunTIM=""#227
# [Modems]
MODEM0= # 51.1st modem
MSPEED0=# 52.port's speed
MINIT0=""# 53.init string
MTU0=#541.Maximum Transmit Unit
MRU0=#542.Maximum Receive Unit
MADDR0=192.168.168.2# 55.ppp link remote addr (for dialin purpose)
MODEM1= # 61
MSPEED1=# 62
MINIT1=""# 63
MTU1=#641
MRU1=#642
MADDR1=192.168.168.3# 65.I said for dialin purpose.
# [leased line router]
ADRTYPE=dynamic #921.if ISP supplies us with dynamic IP, then:
LOCAL=127.0.0.2 #922.fake local side ppp IP addr
REMOTE=127.0.0.3 #923.fake remote addr
# [ethernet/leased/printer/ras router]
GATEWAY=#911.Default gateway, if exist.
DNSADDR=195.130.132.17#912.Primary DNS address for ethernet connection
DNSADDR1=195.130.132.18#913.Secondary DNS address for ethernet connection
PROXY="proxy.pandora.be:8080"#914.HTTP proxy addr[:port]
# [Hardware]
IO0=0x300#811.1st ethernet card I/O address
IRQ0=10#812.IRQ line
IO1=0#821
IRQ1=0#822
IO2=0#831
IRQ2=0#832
# [Networks]
USEDHCP0=y#720.Use DHCP client to config this interface
INTNAME0=eth0#721.Interface name (eth0|arc0e|arc0)
DHCPLOG=n#722.Enable DHCP client messages in the log
DHCPDNS=y#723 Enable auto configuration of DNS via DHCP
IPADDR0=*.*.*.*#724.IP adress of this interface
NETMASK0=255.255.254.0 #725.Network mask
NETWORK0=213.118.96.0# Network address
BRDCAST0=213.118.97.255# Broadcast address
#726.IP pool, empty disables DHCP on this interface
IPRANGE0=""
INTNAME1=eth1#731.Interface name (eth1|eth0:1|arc0e|arc0 etc)
IPADDR1=192.168.0.1#732. Second network
NETMASK1=255.255.255.0
NETWORK1=192.168.0.0
BRDCAST1=192.168.0.255
IPRANGE1="192.168.0.2 192.168.0.8"
INTNAME2=#74x. Third network
IPADDR2=
NETMASK2=
NETWORK2=
BRDCAST2=
IPRANGE2=""
----- cat /etc/live.cfg -----
VER=0.2.7
bootdev=fd0
UPTIME="Thu Mar 14 10:36:58 2002"
RENEW=1
IPADDR0=*.*.*.*
NETMASK0=255.255.255.0
BRDCAST0=213.119.133.255
NETWORK0=213.119.133.0
GATEWAY=213.119.133.1
DNSADDR=195.130.132.18
DNSADDR1=195.130.132.25
UPDATE=1
DONE="echo Done"
----- cat /etc/dhcpc/dhcpcd-eth0.info -----
IPADDR=*.*.*.*
NETMASK=255.255.255.0
NETWORK=213.119.133.0
BROADCAST=213.119.133.255
GATEWAY=213.119.133.1
DOMAIN=pandora.be
DNS=195.130.132.18,195.130.132.25
DHCPSID=195.130.132.17
DHCPGIADDR=213.118.91.1
DHCPSIADDR=195.130.132.17
DHCPCHADDR=00:50:BA:F0:F2:FE
DHCPSHADDR=00:E0:0C:B2:ED:DB
DHCPSNAME=
LEASETIME=3600
RENEWALTIME=1800
REBINDTIME=1860
----- cat /etc/forward.cfg -----
#_47x._[Port_forwarding_AKA_export_services]
#_
#_tcp|udp,incoming_port,local_computer_IP_addr/port
#_
#_Example:_t,80,192.168.168.2/80
#_this_will_open_worldwide_web_server_on_local_computer_192.168.168.2
#_
#_Example:_t,21,192.168.168.3/21
#_this_will_open_worldwide_ftp_server_on_local_computer_192.168.168.2
#_
#_Comment_must_be_on_separate_line_start_with_"#_"_and_should_not_have_spaces
----- cat /etc/banlist.cfg -----
#_23._[List_of_banned_hosts/nets_one_record_per_line]
#_
#_local|external,IP_addr[/netmask_or_netbits_if_baning_a_whole_net]
#_
#_Example:_l,123.124.125.0/24_ban_local_net
#_Example:_e,123.124.125.0/255.255.255.0_ban_external_net
#_Example:_l,10.0.0.123_ban_local_host
#_
#_Comment_must_be_on_separat_lines_start_with_"#_"_and_should_not_have_spaces
----- sed -n 1,/AUTH/P /etc/chat.pwd -----
----- lsmod -----
ModulePagesUsed by
/tmp/net/rtl8139.o.C 31
/tmp/prm/ne.o.A1 21
ip_masq_ftp 10
ip_masq_irc 10
ip_masq_quake 10
ip_masq_vdolive 10
ip_masq_raudio 10
ip_masq_icq 10
ip_masq_cuseeme 10
8390 2[/tmp/prm/ne.o.A1]0
----- dmesg | grep eth -----
NE*000 ethercard probe at 0xff80: 00 50 ba f0 f2 fe
eth0: NE2000 found at 0xff80, using IRQ 11.
eth1: RealTek RTL8139 Fast Ethernet at 0xfc00, IRQ 9, 00:48:54:55:ab:0c.
----- ifconfig -----
lo Link encap:Local Loopback
inet addr:127.0.0.1 Bcast:127.255.255.255 Mask:255.0.0.0
UP BROADCAST LOOPBACK RUNNING MTU:3584 Metric:1
RX packets:5 errors:0 dropped:0 overruns:0
TX packets:5 errors:0 dropped:0 overruns:0
eth0 Link encap:10Mbps Ethernet HWaddr 00:50:BA:F0:F2:FE
inet addr:213.119.133.189 Bcast:213.119.133.255 Mask:255.255.255.0
UP BROADCAST NOTRAILERS RUNNING MTU:1500 Metric:1
RX packets:26148 errors:0 dropped:0 overruns:0
TX packets:21875 errors:0 dropped:0 overruns:0
Interrupt:11 Base address:0xff80
eth1 Link encap:10Mbps Ethernet HWaddr 00:48:54:55:AB:0C
inet addr:192.168.0.1 Bcast:192.168.0.255 Mask:255.255.255.0
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:25292 errors:0 dropped:0 overruns:0
TX packets:28684 errors:0 dropped:0 overruns:0
Interrupt:9 Base address:0xfc00
----- cat /proc/interrupts -----
0: 1436011 timer
1: 8 keyboard
2: 0 cascade
6: 113 + floppy
8: 1 + rtc
9: 50455 eth1
11: 42322 NE2000
13: 0 math error
----- cat /proc/ioports -----
0000-001f : dma1
0020-003f : pic1
0040-005f : timer
0060-006f : keyboard
0070-007f : rtc
0080-009f : dma page reg
00a0-00bf : pic2
00c0-00df : dma2
00f0-00ff : npu
02f8-02ff : serial(auto)
0378-037f : lp
03c0-03df : vga+
03f0-03f5 : floppy
03f7-03f7 : floppy DIR
03f8-03ff : serial(auto)
fc00-fc7f : eth1
ff80-ff9f : NE2000
----- route -n -----
Kernel routing table
Destination Gateway Genmask Flags MSS Window Use Iface
255.255.255.255 * 255.255.255.255 UH 1500 0 3 eth1
213.119.133.0 * 255.255.255.0 U 1500 0 14 eth0
192.168.0.0 * 255.255.255.0 U 1500 0 3 eth1
127.0.0.0 * 255.0.0.0 U 3584 0 1 lo
default 213.119.133.1 * UG 1500 0 66 eth0
----- cat /etc/dhcpd.leases -----
----- free -----
total: used: free: shared: buffers: cached:
Mem: 15147008 8765440 6381568 4431872 2985984 1130496
Swap: 0 0 0
MemTotal: 14792 kB
MemFree: 6232 kB
MemShared: 4328 kB
Buffers: 2916 kB
Cached: 1104 kB
SwapTotal: 0 kB
SwapFree: 0 kB
Mounted FS:
/dev/root / ext2 rw 0 0
/proc /proc proc rw 0 0
/dev/fd0 /mnt umsdos rw 0 0
Filesystem 1024-blocks Used Available Capacity Mounted on
/dev/ram0 2548 1535 1013 60% /
/dev/fd0 1424 1374 50 97% /mnt
----- ps -----
PidStat ParentNameCommand
1 S0initinitauto
2 S1kflushd
3 S1kswapd
4 S1logrotatesh/bin/logrotate
6 S1syslogdsyslogd-r-h-m0
8 S1klogdklogd
19 S1daemonsh/bin/daemon-agetty 9600 tty2
24 S19agettyagetty9600tty2
134 S1dhcpcddhcpcd-R-t600-c/etc/renew-hroutereth0
177 S1namednamed
199 S1dhcpddhcpd-qeth1
339 S1lpdlpd-n1-p515-o/dev/lp1
342 S1thttpdthttpd-p82-uroot-d/wwa-l/dev/null
345 S1daemonsh/bin/daemon-telnetd -debug
347 S345telnetdtelnetd-debug
371 S1daemonsh/bin/daemon-agetty 9600 tty1
373 S371agettyagetty9600tty1
5758 Z342usr.cgi
5760 Z342usr.cgi
5761 Z342usr.cgi
5762 Z342usr.cgi
5775 Z342usr.cgi
5781 S4sleepsleep10
5782 S342usr.cgishusr.cgiinfo
5783 S5782sysinfosh/bin/sysinfo
5784 S5782sedseds/</\<\;/g;s/>/\>\;/g
5811 R5783pssh/bin/ps
----- cat /etc/ppp/opt* -----
asyncmap 0
----- setserial -bg /dev/cua? -----
/dev/cua0 at 0x03f8 (irq = 4) is a 16550A
/dev/cua1 at 0x02f8 (irq = 3) is a 16550A
:strip_icc():strip_exif()/u/43473/crop5e12eeae6a054_cropped.jpeg?f=community)