Externe 500 driver kan geen kleur, de ingebouwde 500C driver in Windows XP wel.
[url="http://www.hp.nl"]www.hp.nl[/url] en dan 500c invullen bij support/search...
[url="http://www.hp.com/cposupport/swindexes/dj500c_swen.html"]http://www.hp.com/cposupport/swindexes/dj500c_swen.html[/url] (Engels)
en
[url="http://www.hp.com/cposupport/swindexes/dj500c_swen.html"]http://www.hp.com/cposupport/swindexes/dj500c_swen.html[/url] (Nederlands)
Windows XP -> [url="http://www.hp.com/cgi-bin/cposupport/swindex.pl?p=dj500c&l=en&c=MicrosoftWindowsXP"]http://www.hp.com/cgi-bin/cposupport/swindex.pl?p=dj500c&l=en&c=MicrosoftWindowsXP[/url]
The drivers for HP Deskjet printers are included in Windows XP. The following instructions are for installing the basic driver that is preloaded on Windows XP.
There is no need to download a printer driver from the Web.
This document describes how to load the appropriate printer driver that is pre-installed in your Windows XP operating system. This document only addresses the Windows XP operating system.
Use the instructions below for installing the printer driver. The preinstalled Windows XP driver supports basic printing features.
Steps for basic Windows XP driver installation
The driver should automatically install when the printer is connected to the computer.
Connect the printer to the computer. To verify whether the printer has been installed, do the following:
Click Start, then click Control Panel.
Click Printers and Other Hardware, and then click Printers and Faxes.
Check to see if the printer connected to the computer is installed.
If it has not been installed, use the following instructions to install the basic print driver.
Disconnect the printer cable (parallel or USB).
Click Start, Turn Off Computer, then Turn Off to shut down the computer.
Restart the computer.
Connect the USB or parallel cable.
Press the POWER button to turn on the printer.
The printer driver will install automatically. If it does not install, proceed with the instructions below, "Manually installing the printer driver".
Manually installing the printer driver
Click Start, then Control Panel.
Click Printers and Other Hardware, and then click Printers and Faxes.
In Printer Tasks, click Add a printer.
Click Next.
Select Local, then remove the check from Automatically detect and install my Plug and Play printer.
Select Port
Parallel connection is usually LPT1
USB connection is usually USB001
Click Next.
Select HP from the Manufacturer list.
Select the printer model from the printer list, then click Next.
Select Yes if this printer is the default printer, or select No if it is not.
Click Next to continue.
Select No to skip the test page, then click Next.
Click Finish to complete the installation.
NOTE: If prompted for a Windows disk in Step 11, do not use the disk that came with the printer, use the Windows XP disk or the recovery disk that came with the computer.
If prompted for a Windows disk, insert the appropriate Windows or PC Recovery disk not the disk that came with the printer and follow the instructions on the screen. Once the driver has been installed, it will be listed in the Printers window (Start, Printers and Faxes).