[tuxracer] Start niet. NVIDIA drivers installed!

[urk_forever]

Heb net mijn pc geinstalled met Slackware 8. Heb ook de nieuwste Nvidia drivers geinstalled en wil kijken of dat nog een beetje draait zo. Dus heb ik tuxracer gedownload en die wil ik nu draaien dus heb ik het uitpepakt en geinstalled. Nu wil ik het draaien maar ik krijg de volgende foutmelding:

Xlib: extension "GLX" missing on display ":0.0".
Xlib: extension "GLX" missing on display ":0.0".
*** tuxracer error: Couldn't initialize video: Couldn't find matching GLX visual (Success)

Ik heb al gezocht maar volgens mij zou alles zo moeten werken! Heb ook al de faq op www.tuxracer.com gelezen maar werkt nog steeds niet!

[Creepy]

Heb je ook de readme's van de NVIDIA drivers (zowel de kernel als de GLX drivers) gelezen??

Daar in staat namelijk in hoe je GLX voor je NVidia kaart in X kan aanzetten.

[urk_forever]

Staat aan in de XF86Config!!

[GeeMoney]

Op donderdag 23 mei 2002 16:20 schreef urk_forever het volgende:
Staat aan in de XF86Config!!

post dat gedeelte eens...

[Niek]

Weet je zeker dat je

code:

Load "glx"

in je /etc/X11/XF86Config(-4) hebt staan? Lees anders eens de nVidia-README door: http://download.nvidia.com/XFree86_40/1.0-2960/README.txt

Trouwens, ik zie nu dat er vandaag een nieuwe versie van de nVidia-drivers voor Linux is uitgekomen

[urk_forever]

Dit is mijn XF86Config:

code:

# File generated by xf86config.

#
# Copyright (c) 1999 by The XFree86 Project, Inc.
#
# Permission is hereby granted, free of charge, to any person obtaining a
# copy of this software and associated documentation files (the "Software"),
# to deal in the Software without restriction, including without limitation
# the rights to use, copy, modify, merge, publish, distribute, sublicense,
# and/or sell copies of the Software, and to permit persons to whom the
# Software is furnished to do so, subject to the following conditions:
# 
# The above copyright notice and this permission notice shall be included in
# all copies or substantial portions of the Software.
# 
# THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
# IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
# FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT.  IN NO EVENT SHALL
# THE XFREE86 PROJECT BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
# WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF
# OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
# SOFTWARE.
# 
# Except as contained in this notice, the name of the XFree86 Project shall
# not be used in advertising or otherwise to promote the sale, use or other
# dealings in this Software without prior written authorization from the
# XFree86 Project.
#

# **********************************************************************
# Refer to the XF86Config(4/5) man page for details about the format of 
# this file.
# **********************************************************************

# **********************************************************************
# Module section -- this  section  is used to specify
# which dynamically loadable modules to load.
# **********************************************************************
#
Section "Module"

# This loads the DBE extension module.

    Load      "dbe"   # Double buffer extension

# This loads the miscellaneous extensions module, and disables
# initialisation of the XFree86-DGA extension within that module.
    SubSection  "extmod"
    Option    "omit xfree86-dga"   # don't initialise the DGA extension
    EndSubSection

# This loads the Type1 and FreeType font modules
    Load      "type1"
    Load      "freetype"

# This loads the GLX module
    Load     "glx"

EndSection

# **********************************************************************
# Files section.  This allows default font and rgb paths to be set
# **********************************************************************

Section "Files"

# The location of the RGB database.  Note, this is the name of the
# file minus the extension (like ".txt" or ".db").  There is normally
# no need to change the default.

    RgbPath "/usr/X11R6/lib/X11/rgb"

# Multiple FontPath entries are allowed (which are concatenated together),
# as well as specifying multiple comma-separated entries in one FontPath
# command (or a combination of both methods)
# 
# If you don't have a floating point coprocessor and emacs, Mosaic or other
# programs take long to start up, try moving the Type1 and Speedo directory
# to the end of this list (or comment them out).
# 

    FontPath   "/usr/X11R6/lib/X11/fonts/local/"
    FontPath   "/usr/X11R6/lib/X11/fonts/misc/"
    FontPath   "/usr/X11R6/lib/X11/fonts/75dpi/:unscaled"
    FontPath   "/usr/X11R6/lib/X11/fonts/100dpi/:unscaled"
    FontPath   "/usr/X11R6/lib/X11/fonts/Type1/"
    FontPath   "/usr/X11R6/lib/X11/fonts/Speedo/"
    FontPath   "/usr/X11R6/lib/X11/fonts/75dpi/"
    FontPath   "/usr/X11R6/lib/X11/fonts/100dpi/"

# The module search path.  The default path is shown here.

#    ModulePath "/usr/X11R6/lib/modules"

EndSection

# **********************************************************************
# Server flags section.
# **********************************************************************

Section "ServerFlags"

# Uncomment this to cause a core dump at the spot where a signal is 
# received.  This may leave the console in an unusable state, but may
# provide a better stack trace in the core dump to aid in debugging

#    Option "NoTrapSignals"

# Uncomment this to disable the <Crtl><Alt><BS> server abort sequence
# This allows clients to receive this key event.

#    Option "DontZap"

# Uncomment this to disable the <Crtl><Alt><KP_+>/<KP_-> mode switching
# sequences.  This allows clients to receive these key events.

#    Option "Dont Zoom"

# Uncomment this to disable tuning with the xvidtune client. With
# it the client can still run and fetch card and monitor attributes,
# but it will not be allowed to change them. If it tries it will
# receive a protocol error.

#    Option "DisableVidModeExtension"

# Uncomment this to enable the use of a non-local xvidtune client. 

#    Option "AllowNonLocalXvidtune"

# Uncomment this to disable dynamically modifying the input device
# (mouse and keyboard) settings. 

#    Option "DisableModInDev"

# Uncomment this to enable the use of a non-local client to
# change the keyboard or mouse settings (currently only xset).

#    Option "AllowNonLocalModInDev"

EndSection

# **********************************************************************
# Input devices
# **********************************************************************

# **********************************************************************
# Core keyboard's InputDevice section
# **********************************************************************

Section "InputDevice"

    Identifier  "Keyboard1"
    Driver  "Keyboard"
# For most OSs the protocol can be omitted (it defaults to "Standard").
# When using XQUEUE (only for SVR3 and SVR4, but not Solaris),
# uncomment the following line.

#    Option     "Protocol"  "Xqueue"

    Option "AutoRepeat" "500 30"

# Specify which keyboard LEDs can be user-controlled (eg, with xset(1))
#    Option "Xleds" "1 2 3"

#    Option "LeftAlt"     "Meta"
#    Option "RightAlt"    "ModeShift"

# To customise the XKB settings to suit your keyboard, modify the
# lines below (which are the defaults).  For example, for a non-U.S.
# keyboard, you will probably want to use:
#    Option "XkbModel"    "pc102"
# If you have a US Microsoft Natural keyboard, you can use:
#    Option "XkbModel"    "microsoft"
#
# Then to change the language, change the Layout setting.
# For example, a german layout can be obtained with:
#    Option "XkbLayout"   "de"
# or:
#    Option "XkbLayout"   "de"
#    Option "XkbVariant"  "nodeadkeys"
#
# If you'd like to switch the positions of your capslock and
# control keys, use:
#    Option "XkbOptions"  "ctrl:swapcaps"

# These are the default XKB settings for XFree86
#    Option "XkbRules"    "xfree86"
#    Option "XkbModel"    "pc101"
#    Option "XkbLayout"   "us"
#    Option "XkbVariant"  ""
#    Option "XkbOptions"  ""

#    Option "XkbDisable"

    Option "XkbRules"   "xfree86"
    Option "XkbModel"   "pc104"
    Option "XkbLayout"  "us"

EndSection


# **********************************************************************
# Core Pointer's InputDevice section
# **********************************************************************

Section "InputDevice"

# Identifier and driver

    Identifier  "Mouse1"
    Driver  "mouse"
    Option "Protocol"    "PS/2"
    Option "Device" "/dev/mouse"

# When using XQUEUE, comment out the above two lines, and uncomment
# the following line.

#    Option "Protocol"  "Xqueue"

# Baudrate and SampleRate are only for some Logitech mice. In
# almost every case these lines should be omitted.

#    Option "BaudRate"  "9600"
#    Option "SampleRate"    "150"

# Emulate3Buttons is an option for 2-button Microsoft mice
# Emulate3Timeout is the timeout in milliseconds (default is 50ms)

    Option "Emulate3Buttons"
#    Option "Emulate3Timeout"    "50"

# ChordMiddle is an option for some 3-button Logitech mice

#    Option "ChordMiddle"

EndSection


# **********************************************************************
# Other input device sections 
# this is optional and is required only if you
# are using extended input devices.  This is for example only.  Refer
# to the XF86Config man page for a description of the options.
# **********************************************************************
#
# Section "InputDevice" 
#    Identifier  "Mouse2"
#    Driver "mouse"
#    Option "Protocol"  "MouseMan"
#    Option "Device"      "/dev/mouse2"
# EndSection
#
# Section "InputDevice"
#    Identifier "spaceball"
#    Driver     "magellan"
#    Option     "Device"      "/dev/cua0"
# EndSection
#
# Section "InputDevice"
#    Identifier "spaceball2"
#    Driver     "spaceorb"
#    Option     "Device"      "/dev/cua0"
# EndSection
#
# Section "InputDevice"
#    Identifier "touchscreen0"
#    Driver     "microtouch"
#    Option     "Device"      "/dev/ttyS0"
#    Option     "MinX"      "1412"
#    Option     "MaxX"      "15184"
#    Option     "MinY"      "15372"
#    Option     "MaxY"      "1230"
#    Option     "ScreenNumber"  "0"
#    Option     "ReportingMode" "Scaled"
#    Option     "ButtonNumber"  "1"
#    Option     "SendCoreEvents"
# EndSection
#
# Section "InputDevice"
#    Identifier "touchscreen1"
#    Driver     "elo2300"
#    Option     "Device"      "/dev/ttyS0"
#    Option     "MinX"      "231"
#    Option     "MaxX"      "3868"
#    Option     "MinY"      "3858"
#    Option     "MaxY"      "272"
#    Option     "ScreenNumber"  "0"
#    Option     "ReportingMode" "Scaled"
#    Option     "ButtonThreshold"    "17"
#    Option     "ButtonNumber"  "1"
#    Option     "SendCoreEvents"
# EndSection

# **********************************************************************
# Monitor section
# **********************************************************************

# Any number of monitor sections may be present

Section "Monitor"

    Identifier  "Siemens MCM1751"

# HorizSync is in kHz unless units are specified.
# HorizSync may be a comma separated list of discrete values, or a
# comma separated list of ranges of values.
# NOTE: THE VALUES HERE ARE EXAMPLES ONLY.  REFER TO YOUR MONITOR'S
# USER MANUAL FOR THE CORRECT NUMBERS.

    HorizSync   31.5 - 57.0

#    HorizSync  30-64      # multisync
#    HorizSync  31.5, 35.2    # multiple fixed sync frequencies
#    HorizSync  15-25, 30-50  # multiple ranges of sync frequencies

# VertRefresh is in Hz unless units are specified.
# VertRefresh may be a comma separated list of discrete values, or a
# comma separated list of ranges of values.
# NOTE: THE VALUES HERE ARE EXAMPLES ONLY.  REFER TO YOUR MONITOR'S
# USER MANUAL FOR THE CORRECT NUMBERS.

    VertRefresh 55-120

EndSection


# **********************************************************************
# Graphics device section
# **********************************************************************

# Any number of graphics device sections may be present

# Standard VGA Device:

Section "Device"
    Identifier  "Standard VGA"
    VendorName  "Unknown"
    BoardName   "Unknown"

# The chipset line is optional in most cases.  It can be used to override
# the driver's chipset detection, and should not normally be specified.

#    Chipset    "generic"

# The Driver line must be present.  When using run-time loadable driver
# modules, this line instructs the server to load the specified driver
# module.  Even when not using loadable driver modules, this line
# indicates which driver should interpret the information in this section.

    Driver     "vga"
# The BusID line is used to specify which of possibly multiple devices
# this section is intended for.  When this line isn't present, a device
# section can only match up with the primary video device.  For PCI
# devices a line like the following could be used.  This line should not
# normally be included unless there is more than one video device
# intalled.

#    BusID  "PCI:0:10:0"

#    VideoRam   256

#    Clocks 25.2 28.3

EndSection

# Device configured by xf86config:

Section "Device"
    Identifier  "PowerColor Sniper M TNT-2 M64"
    Driver  "nvidia"
    #VideoRam    16384
    # Insert Clocks lines here if appropriate
EndSection


# **********************************************************************
# Screen sections
# **********************************************************************

# Any number of screen sections may be present.  Each describes
# the configuration of a single screen.  A single specific screen section
# may be specified from the X server command line with the "-screen"
# option.
Section "Screen"
    Identifier  "Screen 1"
    Device  "PowerColor Sniper M TNT-2 M64"
    Monitor     "Siemens MCM1751"
    DefaultDepth 16

    Subsection "Display"
      Depth  8
      Modes  "640x480" "800x600" "1024x768"
      ViewPort    0 0
    EndSubsection
    Subsection "Display"
      Depth  16
      Modes  "640x480" "800x600" "1024x768"
      ViewPort    0 0
    EndSubsection
    Subsection "Display"
      Depth  24
      Modes  "640x480" "800x600" "1024x768"
      ViewPort    0 0
    EndSubsection
EndSection

# **********************************************************************
# ServerLayout sections.
# **********************************************************************

# Any number of ServerLayout sections may be present.  Each describes
# the way multiple screens are organised.  A specific ServerLayout
# section may be specified from the X server command line with the
# "-layout" option.  In the absence of this, the first section is used.
# When now ServerLayout section is present, the first Screen section
# is used alone.

Section "ServerLayout"

# The Identifier line must be present
    Identifier  "Simple Layout"

# Each Screen line specifies a Screen section name, and optionally
# the relative position of other screens.  The four names after
# primary screen name are the screens to the top, bottom, left and right
# of the primary screen.  In this example, screen 2 is located to the
# right of screen 1.

    Screen "Screen 1"

# Each InputDevice line specifies an InputDevice section name and
# optionally some options to specify the way the device is to be
# used.  Those options include "CorePointer", "CoreKeyboard" and
# "SendCoreEvents".

    InputDevice "Mouse1" "CorePointer"
    InputDevice "Keyboard1" "CoreKeyboard"

EndSection

[GeeMoney]

krijg je het Nvidia splash screen als je je x-window boot?

[urk_forever]

Ja

[GeeMoney]

Op donderdag 23 mei 2002 16:41 schreef urk_forever het volgende:
Ja

download de nieuwe tuxracer demo eens van www.tuxracer.com
en probeer die eens ajb.

[Niek]

Post eens de output van /var/log/XFree86.0.log.

[urk_forever]

Op donderdag 23 mei 2002 16:43 schreef The_Dart het volgende:

[..]

download de nieuwe tuxracer demo eens van www.tuxracer.com
en probeer die eens ajb.

Uhh, heb ik al gedaan!!!

Output van XF86.0.log:

code:

XFree86 Version 4.1.0 / X Window System
(protocol Version 11, revision 0, vendor release 6510)
Release Date: 2 June 2001
    If the server is older than 6-12 months, or if your card is
    newer than the above date, look for a newer version before
    reporting problems.  (See http://www.XFree86.Org/FAQ)
Build Operating System: Linux 2.2.19 i686 [ELF] 
Module Loader present
(==) Log file: "/var/log/XFree86.0.log", Time: Sat Jun 15 16:32:27 2002
(==) Using config file: "/etc/X11/XF86Config"
Markers: (--) probed, (**) from config file, (==) default setting,
       (++) from command line, (!!) notice, (II) informational,
       (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) ServerLayout "Simple Layout"
(**) |-->Screen "Screen 1" (0)
(**) |   |-->Monitor "Siemens MCM1751"
(**) |   |-->Device "PowerColor Sniper M TNT-2 M64"
(**) |-->Input Device "Mouse1"
(**) |-->Input Device "Keyboard1"
(**) Option "AutoRepeat" "500 30"
(**) Option "XkbRules" "xfree86"
(**) XKB: rules: "xfree86"
(**) Option "XkbModel" "pc104"
(**) XKB: model: "pc104"
(**) Option "XkbLayout" "us"
(**) XKB: layout: "us"
(==) Keyboard: CustomKeycode disabled
(**) FontPath set to "/usr/X11R6/lib/X11/fonts/local/,/usr/X11R6/lib/X11/fonts/misc/,/usr/X11R6/lib/X11/fonts/75dpi/:unscaled,/usr/X11R6/lib/X11/fonts/100dpi/:unscaled,/usr/X11R6/lib/X11/fonts/Type1/,/usr/X11R6/lib/X11/fonts/Speedo/,/usr/X11R6/lib/X11/fonts/75dpi/,/usr/X11R6/lib/X11/fonts/100dpi/"
(**) RgbPath set to "/usr/X11R6/lib/X11/rgb"
(==) ModulePath set to "/usr/X11R6/lib/modules"
(--) using VT number 7

(WW) Cannot open APM
(II) Module ABI versions:
    XFree86 ANSI C Emulation: 0.1
    XFree86 Video Driver: 0.4
    XFree86 XInput driver : 0.2
    XFree86 Server Extension : 0.1
    XFree86 Font Renderer : 0.2
(II) Loader running on linux
(II) LoadModule: "bitmap"
(II) Loading /usr/X11R6/lib/modules/fonts/libbitmap.a
(II) Module bitmap: vendor="The XFree86 Project"
    compiled for 4.1.0, module version = 1.0.0
    Module class: XFree86 Font Renderer
    ABI class: XFree86 Font Renderer, version 0.2
(II) Loading font Bitmap
(II) LoadModule: "pcidata"
(II) Loading /usr/X11R6/lib/modules/libpcidata.a
(II) Module pcidata: vendor="The XFree86 Project"
    compiled for 4.1.0, module version = 0.1.0
    ABI class: XFree86 Video Driver, version 0.4
(II) PCI: Probing config type using method 1
(II) PCI: Config type is 1
(II) PCI: stages = 0x03, oldVal1 = 0x00000000, mode1Res1 = 0x80000000
(II) PCI: PCI scan (all values are in hex)
(II) PCI: 00:00:0: chip 1106,0691 card 0000,0000 rev 44 class 06,00,00 hdr 00
(II) PCI: 00:01:0: chip 1106,8598 card 0000,0000 rev 00 class 06,04,00 hdr 01
(II) PCI: 00:07:0: chip 1106,0596 card 1106,0000 rev 22 class 06,01,00 hdr 80
(II) PCI: 00:07:1: chip 1106,0571 card 0000,0000 rev 10 class 01,01,8a hdr 00
(II) PCI: 00:07:2: chip 1106,3038 card 0925,1234 rev 11 class 0c,03,00 hdr 00
(II) PCI: 00:07:3: chip 1106,3050 card 0000,0000 rev 30 class 06,00,00 hdr 00
(II) PCI: 00:0f:0: chip 10b7,9200 card 10b7,1000 rev 74 class 02,00,00 hdr 00
(II) PCI: 01:00:0: chip 10de,002d card 0000,0000 rev 15 class 03,00,00 hdr 00
(II) PCI: End of PCI scan
(II) LoadModule: "scanpci"
(II) Loading /usr/X11R6/lib/modules/libscanpci.a
(II) Module scanpci: vendor="The XFree86 Project"
    compiled for 4.1.0, module version = 0.1.0
    ABI class: XFree86 Video Driver, version 0.4
(II) UnloadModule: "scanpci"
(II) Unloading /usr/X11R6/lib/modules/libscanpci.a
(II) Host-to-PCI bridge:
(II) PCI-to-ISA bridge:
(II) Host-to-PCI bridge:
(II) PCI-to-PCI bridge:
(II) Bus 0: bridge is at (0:0:0), (-1,0,0), BCTRL: 0x08 (VGA_EN is set)
(II) Bus 0 I/O range:
    [0] -1  0x00000000 - 0x0000ffff (0x10000) IX[B]
(II) Bus 0 non-prefetchable memory range:
    [0] -1  0x00000000 - 0xffffffff (0x0) MX[B]
(II) Bus 0 prefetchable memory range:
    [0] -1  0x00000000 - 0xffffffff (0x0) MX[B]
(II) Bus 1: bridge is at (0:1:0), (0,1,1), BCTRL: 0x0c (VGA_EN is set)
(II) Bus 1 I/O range:
(II) Bus 1 non-prefetchable memory range:
    [0] -1  0xd4000000 - 0xd5ffffff (0x2000000) MX[B]
(II) Bus 1 prefetchable memory range:
    [0] -1  0xd6000000 - 0xd7ffffff (0x2000000) MX[B]
(II) Bus -1: bridge is at (0:7:0), (0,-1,0), BCTRL: 0x08 (VGA_EN is set)
(II) Bus -1 I/O range:
(II) Bus -1 non-prefetchable memory range:
(II) Bus -1 prefetchable memory range:
(II) Bus -1: bridge is at (0:0:0), (-1,-1,0), BCTRL: 0x08 (VGA_EN is set)
(II) Bus -1 I/O range:
    [0] -1  0x00000000 - 0x0000ffff (0x10000) IX[B]
(II) Bus -1 non-prefetchable memory range:
    [0] -1  0x00000000 - 0xffffffff (0x0) MX[B]
(II) Bus -1 prefetchable memory range:
    [0] -1  0x00000000 - 0xffffffff (0x0) MX[B]
(--) PCI:*(1:0:0) NVidia Riva Ultra 64 rev 21, Mem @ 0xd4000000/24, 0xd6000000/25
(II) Addressable bus resource ranges are
    [0] -1  0x00000000 - 0xffffffff (0x0) MX[B]
    [1] -1  0x00000000 - 0x0000ffff (0x10000) IX[B]
(II) OS-reported resource ranges:
    [0] -1  0xffe00000 - 0xffffffff (0x200000) MX[B](B)
    [1] -1  0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
    [2] -1  0x000f0000 - 0x000fffff (0x10000) MX[B]
    [3] -1  0x000c0000 - 0x000effff (0x30000) MX[B]
    [4] -1  0x00000000 - 0x0009ffff (0xa0000) MX[B]
    [5] -1  0x0000ffff - 0x0000ffff (0x1) IX[B]
    [6] -1  0x00000000 - 0x000000ff (0x100) IX[B]
(II) Active PCI resource ranges:
    [0] -1  0xd9000000 - 0xd900007f (0x80) MX[B]
    [1] -1  0xd6000000 - 0xd7ffffff (0x2000000) MX[B](B)
    [2] -1  0xd4000000 - 0xd4ffffff (0x1000000) MX[B](B)
    [3] -1  0x0000e800 - 0x0000e87f (0x80) IX[B]
    [4] -1  0x0000e400 - 0x0000e41f (0x20) IX[B]
    [5] -1  0x0000e000 - 0x0000e00f (0x10) IX[B]
(II) Active PCI resource ranges after removing overlaps:
    [0] -1  0xd9000000 - 0xd900007f (0x80) MX[B]
    [1] -1  0xd6000000 - 0xd7ffffff (0x2000000) MX[B](B)
    [2] -1  0xd4000000 - 0xd4ffffff (0x1000000) MX[B](B)
    [3] -1  0x0000e800 - 0x0000e87f (0x80) IX[B]
    [4] -1  0x0000e400 - 0x0000e41f (0x20) IX[B]
    [5] -1  0x0000e000 - 0x0000e00f (0x10) IX[B]
(II) OS-reported resource ranges after removing overlaps with PCI:
    [0] -1  0xffe00000 - 0xffffffff (0x200000) MX[B](B)
    [1] -1  0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
    [2] -1  0x000f0000 - 0x000fffff (0x10000) MX[B]
    [3] -1  0x000c0000 - 0x000effff (0x30000) MX[B]
    [4] -1  0x00000000 - 0x0009ffff (0xa0000) MX[B]
    [5] -1  0x0000ffff - 0x0000ffff (0x1) IX[B]
    [6] -1  0x00000000 - 0x000000ff (0x100) IX[B]
(II) All system resource ranges:
    [0] -1  0xffe00000 - 0xffffffff (0x200000) MX[B](B)
    [1] -1  0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
    [2] -1  0x000f0000 - 0x000fffff (0x10000) MX[B]
    [3] -1  0x000c0000 - 0x000effff (0x30000) MX[B]
    [4] -1  0x00000000 - 0x0009ffff (0xa0000) MX[B]
    [5] -1  0xd9000000 - 0xd900007f (0x80) MX[B]
    [6] -1  0xd6000000 - 0xd7ffffff (0x2000000) MX[B](B)
    [7] -1  0xd4000000 - 0xd4ffffff (0x1000000) MX[B](B)
    [8] -1  0x0000ffff - 0x0000ffff (0x1) IX[B]
    [9] -1  0x00000000 - 0x000000ff (0x100) IX[B]
    [10] -1 0x0000e800 - 0x0000e87f (0x80) IX[B]
    [11] -1 0x0000e400 - 0x0000e41f (0x20) IX[B]
    [12] -1 0x0000e000 - 0x0000e00f (0x10) IX[B]
(II) LoadModule: "dbe"
(II) Loading /usr/X11R6/lib/modules/extensions/libdbe.a
(II) Module dbe: vendor="The XFree86 Project"
    compiled for 4.1.0, module version = 1.0.0
    Module class: XFree86 Server Extension
    ABI class: XFree86 Server Extension, version 0.1
(II) Loading extension DOUBLE-BUFFER
(II) LoadModule: "extmod"
(II) Loading /usr/X11R6/lib/modules/extensions/libextmod.a
(II) Module extmod: vendor="The XFree86 Project"
    compiled for 4.1.0, module version = 1.0.0
    Module class: XFree86 Server Extension
    ABI class: XFree86 Server Extension, version 0.1
(II) Loading extension SHAPE
(II) Loading extension MIT-SUNDRY-NONSTANDARD
(II) Loading extension BIG-REQUESTS
(II) Loading extension SYNC
(II) Loading extension MIT-SCREEN-SAVER
(II) Loading extension XC-MISC
(II) Loading extension XFree86-VidModeExtension
(II) Loading extension XFree86-Misc
(II) Loading extension DPMS
(II) Loading extension FontCache
(II) Loading extension TOG-CUP
(II) Loading extension Extended-Visual-Information
(II) Loading extension XVideo
(II) Loading extension XVideo-MotionCompensation
(II) LoadModule: "type1"
(II) Loading /usr/X11R6/lib/modules/fonts/libtype1.a
(II) Module type1: vendor="The XFree86 Project"
    compiled for 4.1.0, module version = 1.0.0
    Module class: XFree86 Font Renderer
    ABI class: XFree86 Font Renderer, version 0.2
(II) Loading font Type1
(II) Loading font CID
(II) LoadModule: "freetype"
(II) Loading /usr/X11R6/lib/modules/fonts/libfreetype.a
(II) Module freetype: vendor="The XFree86 Project"
    compiled for 4.1.0, module version = 1.1.9
    Module class: XFree86 Font Renderer
    ABI class: XFree86 Font Renderer, version 0.2
(II) Loading font FreeType
(II) LoadModule: "glx"
(II) Loading /usr/X11R6/lib/modules/extensions/libglx.so
(II) Module glx: vendor="NVIDIA Corporation"
    compiled for 4.0.2, module version = 1.0.2880
    Module class: XFree86 Server Extension
    ABI class: XFree86 Server Extension, version 0.1
(II) Loading extension GLX
(II) LoadModule: "nvidia"
(II) Loading /usr/X11R6/lib/modules/drivers/nvidia_drv.o
(II) Module nvidia: vendor="NVIDIA Corporation"
    compiled for 4.0.2, module version = 1.0.2880
    Module class: XFree86 Video Driver
(II) LoadModule: "mouse"
(II) Loading /usr/X11R6/lib/modules/input/mouse_drv.o
(II) Module mouse: vendor="The XFree86 Project"
    compiled for 4.1.0, module version = 1.0.0
    Module class: XFree86 XInput Driver
    ABI class: XFree86 XInput driver, version 0.2
(II) NVIDIA XFree86 Driver  1.0-2880  Tue Mar 26 08:15:50 PST 2002
(II) NVIDIA: NVIDIA driver for: RIVA TNT, RIVA TNT2, Vanta,
    RIVA TNT2 Ultra, RIVA TNT2 Model 64, Aladdin TNT2, GeForce 256,
    GeForce DDR, Quadro, GeForce2 MX/MX 400, GeForce2 MX 100/200,
    Quadro2 MXR/EX/Go, GeForce2 Integrated GPU, GeForce2 GTS,
    GeForce2 Ti, GeForce2 Ultra, Quadro2 Pro, GeForce4 MX 460,
    GeForce4 MX 440, GeForce4 MX 420, Quadro4 500XGL, Quadro4 200/400NVS,
    Quadro4 550XGL, GeForce3, GeForce3 Ti 200, GeForce3 Ti 500,
    Quadro DCC, GeForce4 Ti 4600, GeForce4 Ti 4400, GeForce4 Ti 4200,
    Quadro4 900XGL, Quadro4 750XGL, Quadro4 700XGL, GeForce2 Go,
    GeForce4 440 Go, GeForce4 420 Go, GeForce4 420 Go 32M,
    GeForce4 440 Go 64M, Quadro4 500 GoGL
(II) Primary Device is: PCI 01:00:0
(--) Assigning device section with no busID to primary device
(--) Chipset RIVA TNT2 Model 64 found
(II) resource ranges after xf86ClaimFixedResources() call:
    [0] -1  0xffe00000 - 0xffffffff (0x200000) MX[B](B)
    [1] -1  0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
    [2] -1  0x000f0000 - 0x000fffff (0x10000) MX[B]
    [3] -1  0x000c0000 - 0x000effff (0x30000) MX[B]
    [4] -1  0x00000000 - 0x0009ffff (0xa0000) MX[B]
    [5] -1  0xd9000000 - 0xd900007f (0x80) MX[B]
    [6] -1  0xd6000000 - 0xd7ffffff (0x2000000) MX[B](B)
    [7] -1  0xd4000000 - 0xd4ffffff (0x1000000) MX[B](B)
    [8] -1  0x0000ffff - 0x0000ffff (0x1) IX[B]
    [9] -1  0x00000000 - 0x000000ff (0x100) IX[B]
    [10] -1 0x0000e800 - 0x0000e87f (0x80) IX[B]
    [11] -1 0x0000e400 - 0x0000e41f (0x20) IX[B]
    [12] -1 0x0000e000 - 0x0000e00f (0x10) IX[B]
(II) resource ranges after probing:
    [0] -1  0xffe00000 - 0xffffffff (0x200000) MX[B](B)
    [1] -1  0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
    [2] -1  0x000f0000 - 0x000fffff (0x10000) MX[B]
    [3] -1  0x000c0000 - 0x000effff (0x30000) MX[B]
    [4] -1  0x00000000 - 0x0009ffff (0xa0000) MX[B]
    [5] -1  0xd9000000 - 0xd900007f (0x80) MX[B]
    [6] -1  0xd6000000 - 0xd7ffffff (0x2000000) MX[B](B)
    [7] -1  0xd4000000 - 0xd4ffffff (0x1000000) MX[B](B)
    [8] 0   0x000a0000 - 0x000affff (0x10000) MS[B]
    [9] 0   0x000b0000 - 0x000b7fff (0x8000) MS[B]
    [10] 0  0x000b8000 - 0x000bffff (0x8000) MS[B]
    [11] -1 0x0000ffff - 0x0000ffff (0x1) IX[B]
    [12] -1 0x00000000 - 0x000000ff (0x100) IX[B]
    [13] -1 0x0000e800 - 0x0000e87f (0x80) IX[B]
    [14] -1 0x0000e400 - 0x0000e41f (0x20) IX[B]
    [15] -1 0x0000e000 - 0x0000e00f (0x10) IX[B]
    [16] 0  0x000003b0 - 0x000003bb (0xc) IS[B]
    [17] 0  0x000003c0 - 0x000003df (0x20) IS[B]
(II) Setting vga for screen 0.
(II) Loading sub module "vgahw"
(II) LoadModule: "vgahw"
(II) Loading /usr/X11R6/lib/modules/libvgahw.a
(II) Module vgahw: vendor="The XFree86 Project"
    compiled for 4.1.0, module version = 0.1.0
    ABI class: XFree86 Video Driver, version 0.4
(**) NVIDIA(0): Depth 16, (--) framebuffer bpp 16
(==) NVIDIA(0): RGB weight 565
(==) NVIDIA(0): Default visual is TrueColor
(==) NVIDIA(0): Using gamma correction (1.0, 1.0, 1.0)
(--) NVIDIA(0): Linear framebuffer at 0xD6000000
(--) NVIDIA(0): MMIO registers at 0xD4000000
(--) NVIDIA(0): VideoRAM: 32768 kBytes
(--) NVIDIA(0): Display 0: maximum pixel clock at  8 bpp: 250 MHz
(--) NVIDIA(0): Display 0: maximum pixel clock at 16 bpp: 250 MHz
(--) NVIDIA(0): Display 0: maximum pixel clock at 32 bpp: 215 MHz
(II) Loading sub module "ddc"
(II) LoadModule: "ddc"
(II) Loading /usr/X11R6/lib/modules/libddc.a
(II) Module ddc: vendor="The XFree86 Project"
    compiled for 4.1.0, module version = 1.0.0
    ABI class: XFree86 Video Driver, version 0.4
(WW) NVIDIA(0): Failure reading EDID parameters for display device 0.
(II) NVIDIA(0): Siemens MCM1751: Using hsync range of 31.50-57.00 kHz
(II) NVIDIA(0): Siemens MCM1751: Using vrefresh range of 55.00-120.00 Hz
(II) NVIDIA(0): Clock range:  12.00 to 250.00 MHz
(II) NVIDIA(0): Not using default mode "1024x768" (hsync out of range)
(II) NVIDIA(0): Not using default mode "1024x768" (hsync out of range)
(II) NVIDIA(0): Not using default mode "1152x864" (hsync out of range)
(II) NVIDIA(0): Not using default mode "1280x960" (hsync out of range)
(II) NVIDIA(0): Not using default mode "1280x960" (hsync out of range)
(II) NVIDIA(0): Not using default mode "1280x1024" (hsync out of range)
(II) NVIDIA(0): Not using default mode "1280x1024" (hsync out of range)
(II) NVIDIA(0): Not using default mode "1280x1024" (hsync out of range)
(II) NVIDIA(0): Not using default mode "1600x1200" (hsync out of range)
(II) NVIDIA(0): Not using default mode "1600x1200" (hsync out of range)
(II) NVIDIA(0): Not using default mode "1600x1200" (hsync out of range)
(II) NVIDIA(0): Not using default mode "1600x1200" (hsync out of range)
(II) NVIDIA(0): Not using default mode "1600x1200" (hsync out of range)
(II) NVIDIA(0): Not using default mode "1792x1344" (hsync out of range)
(II) NVIDIA(0): Not using default mode "1792x1344" (bad mode clock/interlace/doublescan)
(II) NVIDIA(0): Not using default mode "1856x1392" (hsync out of range)
(II) NVIDIA(0): Not using default mode "1856x1392" (bad mode clock/interlace/doublescan)
(II) NVIDIA(0): Not using default mode "1920x1440" (hsync out of range)
(II) NVIDIA(0): Not using default mode "1920x1440" (bad mode clock/interlace/doublescan)
(II) NVIDIA(0): Not using default mode "1400x1050" (hsync out of range)
(II) NVIDIA(0): Not using default mode "1400x1050" (hsync out of range)
(**) NVIDIA(0): Validated modes for Display Device 0:
(**) NVIDIA(0): Default mode "1024x768": 75.0 MHz, 56.5 kHz, 70.1 Hz
(**) NVIDIA(0): Default mode "800x600": 56.3 MHz, 53.7 kHz, 85.1 Hz
(**) NVIDIA(0): Default mode "640x480": 36.0 MHz, 43.3 kHz, 85.0 Hz
(II) NVIDIA(0): Virtual screen size determined to be 1024 x 768
(==) NVIDIA(0): DPI set to (75, 75)
(II) Loading sub module "fb"
(II) LoadModule: "fb"
(II) Loading /usr/X11R6/lib/modules/libfb.a
(II) Module fb: vendor="The XFree86 Project"
    compiled for 4.1.0, module version = 1.0.0
    ABI class: XFree86 ANSI C Emulation, version 0.1
(II) Loading sub module "xaa"
(II) LoadModule: "xaa"
(II) Loading /usr/X11R6/lib/modules/libxaa.a
(II) Module xaa: vendor="The XFree86 Project"
    compiled for 4.1.0, module version = 1.0.0
    ABI class: XFree86 Video Driver, version 0.4
(II) Loading sub module "ramdac"
(II) LoadModule: "ramdac"
(II) Loading /usr/X11R6/lib/modules/libramdac.a
(II) Module ramdac: vendor="The XFree86 Project"
    compiled for 4.1.0, module version = 0.1.0
    ABI class: XFree86 Video Driver, version 0.4
(II) do I need RAC?  No, I don't.
(II) resource ranges after preInit:
    [0] 0   0xd6000000 - 0xd7ffffff (0x2000000) MX[B]
    [1] 0   0xd4000000 - 0xd4ffffff (0x1000000) MX[B]
    [2] -1  0xffe00000 - 0xffffffff (0x200000) MX[B](B)
    [3] -1  0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
    [4] -1  0x000f0000 - 0x000fffff (0x10000) MX[B]
    [5] -1  0x000c0000 - 0x000effff (0x30000) MX[B]
    [6] -1  0x00000000 - 0x0009ffff (0xa0000) MX[B]
    [7] -1  0xd9000000 - 0xd900007f (0x80) MX[B]
    [8] -1  0xd6000000 - 0xd7ffffff (0x2000000) MX[B](B)
    [9] -1  0xd4000000 - 0xd4ffffff (0x1000000) MX[B](B)
    [10] 0  0x000a0000 - 0x000affff (0x10000) MS[B](OprD)
    [11] 0  0x000b0000 - 0x000b7fff (0x8000) MS[B](OprD)
    [12] 0  0x000b8000 - 0x000bffff (0x8000) MS[B](OprD)
    [13] -1 0x0000ffff - 0x0000ffff (0x1) IX[B]
    [14] -1 0x00000000 - 0x000000ff (0x100) IX[B]
    [15] -1 0x0000e800 - 0x0000e87f (0x80) IX[B]
    [16] -1 0x0000e400 - 0x0000e41f (0x20) IX[B]
    [17] -1 0x0000e000 - 0x0000e00f (0x10) IX[B]
    [18] 0  0x000003b0 - 0x000003bb (0xc) IS[B](OprU)
    [19] 0  0x000003c0 - 0x000003df (0x20) IS[B](OprU)
(II) NVIDIA(0): AGP 2X successfully initialized
(II) NVIDIA(0): Setting mode "1024x768"
(II) NVIDIA(0): Using XFree86 Acceleration Architecture (XAA)
    Screen to screen bit blits
    Solid filled rectangles
    Solid filled trapezoids
    8x8 mono pattern filled rectangles
    8x8 mono pattern filled trapezoids
    Indirect CPU to Screen color expansion
    Solid Lines
    Scanline Image Writes
    Offscreen Pixmaps
    Driver provided FillSolidRects replacement
    Driver provided FillSolidSpans replacement
    Driver provided FillMono8x8PatternRects replacement
    Driver provided ReadPixmap replacement
    Setting up tile and stipple cache:
        16 128x128 slots
        4 256x256 slots
(==) NVIDIA(0): Backing store disabled
(==) NVIDIA(0): Silken mouse enabled
(II) Loading extension NV-GLX
(II) Loading extension NV-CONTROL
(II) Initializing built-in extension MIT-SHM
(II) Initializing built-in extension XInputExtension
(II) Initializing built-in extension XTEST
(II) Initializing built-in extension XKEYBOARD
(II) Initializing built-in extension LBX
(II) Initializing built-in extension XC-APPGROUP
(II) Initializing built-in extension SECURITY
(II) Initializing built-in extension XINERAMA
(II) Initializing built-in extension XFree86-Bigfont
(II) Initializing built-in extension RENDER
(II) [GLX]: Calling GlxExtensionInit
(**) Option "Protocol" "PS/2"
(**) Mouse1: Protocol: "PS/2"
(**) Option "CorePointer"
(**) Mouse1: Core Pointer
(**) Option "Device" "/dev/mouse"
(==) Mouse1: Buttons: 3
(**) Option "Emulate3Buttons"
(**) Mouse1: Emulate3Buttons, Emulate3Timeout: 50
(II) Keyboard "Keyboard1" handled by legacy driver
(II) XINPUT: Adding extended input device "Mouse1" (type: MOUSE)
Could not init font path element /usr/X11R6/lib/X11/fonts/Speedo/, removing from list!

[yeadder]

zou je aub alleen de belangrijke stukken willen posten of het hele stuk op een stukkie web space zetten

[urk_forever]

Op donderdag 23 mei 2002 16:55 schreef yeadder het volgende:
zou je aub alleen de belangrijke stukken willen posten of het hele stuk op een stukkie web space zetten

Ik weet toch niet wat ze allemaal belangrijk vinden??

[Jordi]

Hier is eigenlijk 1 apart topic voor, maar omdat dit niet echt een 'universeel' probleem lijkt en het topic al een beetje op gang is, laat ik em bij wijze van uitzondering open...

[odysseus]

Zou je de uitvoer van 'xdpyinfo' eens kunnen neerzetten? Ik ben er haast zeker van dat de GLX-extensie niet wordt geladen, dat is voor zover ik kan bedenken de enige reden dat je een dergelijke foutmelding kunt krijgen...

[urk_forever]

Op donderdag 23 mei 2002 17:10 schreef odysseus het volgende:
Zou je de uitvoer van 'xdpyinfo' eens kunnen neerzetten? Ik ben er haast zeker van dat de GLX-extensie niet wordt geladen, dat is voor zover ik kan bedenken de enige reden dat je een dergelijke foutmelding kunt krijgen...

U vraagt wij draaien. Sorry voor de lappen tekst maar heb zo snel geen webspace!

code:

name of display:    :0.0
version number:    11.0
vendor string:    The XFree86 Project, Inc
vendor release number:    40100000
XFree86 version: 4.1.0
maximum request size:  4194300 bytes
motion buffer size:  256
bitmap unit, bit order, padding:    32, LSBFirst, 32
image byte order:    LSBFirst
number of supported pixmap formats:    7
supported pixmap formats:
    depth 1, bits_per_pixel 1, scanline_pad 32
    depth 4, bits_per_pixel 8, scanline_pad 32
    depth 8, bits_per_pixel 8, scanline_pad 32
    depth 15, bits_per_pixel 16, scanline_pad 32
    depth 16, bits_per_pixel 16, scanline_pad 32
    depth 24, bits_per_pixel 32, scanline_pad 32
    depth 32, bits_per_pixel 32, scanline_pad 32
keycode range:    minimum 8, maximum 255
focus:  window 0x60000e, revert to PointerRoot
number of extensions:    27
    BIG-REQUESTS
    DOUBLE-BUFFER
    DPMS
    Extended-Visual-Information
    FontCache
    GLX
    LBX
    MIT-SCREEN-SAVER
    MIT-SHM
    MIT-SUNDRY-NONSTANDARD
    NV-CONTROL
    NV-GLX
    NVIDIA-GLX
    RENDER
    SECURITY
    SHAPE
    SYNC
    TOG-CUP
    XC-APPGROUP
    XC-MISC
    XFree86-Bigfont
    XFree86-Misc
    XFree86-VidModeExtension
    XInputExtension
    XKEYBOARD
    XTEST
    XVideo
default screen number:    0
number of screens:    1

screen #0:
  dimensions:    1024x768 pixels (347x260 millimeters)
  resolution:    75x75 dots per inch
  depths (7):    16, 1, 4, 8, 15, 24, 32
  root window id:    0x59
  depth of root window:    16 planes
  number of colormaps:    minimum 1, maximum 1
  default colormap:    0x20
  default number of colormap cells:    64
  preallocated pixels:    black 0, white 65535
  options:    backing-store NO, save-unders NO
  largest cursor:    32x32
  current input event mask:    0x58207f
    KeyPressMask         KeyReleaseMask      ButtonPressMask        
    ButtonReleaseMask     EnterWindowMask       LeaveWindowMask     
    PointerMotionMask     ButtonMotionMask     SubstructureNotifyMask   
    SubstructureRedirectMask PropertyChangeMask  
  number of visuals:    4
  default visual id:  0x21
  visual:
    visual id:    0x21
    class:    TrueColor
    depth:    16 planes
    available colormap entries:    64 per subfield
    red, green, blue masks:    0xf800, 0x7e0, 0x1f
    significant bits in color specification:    8 bits
  visual:
    visual id:    0x22
    class:    DirectColor
    depth:    16 planes
    available colormap entries:    64 per subfield
    red, green, blue masks:    0xf800, 0x7e0, 0x1f
    significant bits in color specification:    8 bits
  visual:
    visual id:    0x23
    class:    TrueColor
    depth:    16 planes
    available colormap entries:    64 per subfield
    red, green, blue masks:    0xf800, 0x7e0, 0x1f
    significant bits in color specification:    8 bits
  visual:
    visual id:    0x24
    class:    DirectColor
    depth:    16 planes
    available colormap entries:    64 per subfield
    red, green, blue masks:    0xf800, 0x7e0, 0x1f
    significant bits in color specification:    8 bits

[odysseus]

Hmm, dat is heel vaag. Hij zegt dat de extensie niet aanwezig is, maar die is er dus wel aangezien hij in de lijst met extensies staat. Ik mag aannemen dat glxgears dan ook niet werkt? Als je dat probeert te draaien, werkt dat dan en zo ja hoeveel frames haal je?

[Insanergy]

heb je geen XF86Config-4 ??

[Verwijderd]

ik heb het zelfde probleem, met de zelfde foutmelding. Maar gek genoeg doet de bij suse 8 meegeleverde tuxracer 0.6 het wel, maar de demo 1.1 die ik heb gedownload niet. Gears werkt bij mij ook goed en haalt prachtige fpssen (rond de 800 in een 640/480 window)

Ik heb zo het vermoeden dat het probleem bij mij ontstaat doordat de gedownloade versie een andere directorystructuur verwacht. 3d en open gl werkt gewoon goed, maar alleen niet bij tuxracer. Op internet zijn er velen met het zelfde probleem. het is kennelijk niet zeldzaam. Oplossingen war ik wat aan heb kennelijk wel :- (

[MadEgg]

Ik had dit ook bij Gentoo toen ik hem handmatig had gedownload.
Na een 'emerge tuxracer' van Gentoo werkte het wel, deze installeerde echter eerst nog:

smpeg-0.4.4.1
sdl-mixer-1.2.3

Probeer die eens te installeren als je dat niet hebt, probeer dan nog eens...

[MadEgg]

Trouwens, ik had er ook een probleem mee, bij mij wil het geluid niet...
Hij start verder op en draait prima, maar over het sound krijg ik deze melding:

%%% tuxracer warning: Warning: Coulnd't set 22050 Hz 16-bit audio
Reason: No available audio device
Segmentation fault

En dat terwijl de sound-server van KDE toch echt allang 'idle' is, en 't geluid verder goed werkt...

[odysseus]

Op donderdag 23 mei 2002 20:58 schreef MadEgg het volgende:
%%% tuxracer warning: Warning: Coulnd't set 22050 Hz 16-bit audio
Reason: No available audio device
Segmentation fault

En dat terwijl de sound-server van KDE toch echt allang 'idle' is, en 't geluid verder goed werkt...

Je kunt proberen om dat ding met 'artsdsp tuxracer' op te starten. Als dat niet werkt dan moet je even een 'killall artsd' draaien, na het spelen kun je dan je geluid in KDE weer inschakelen door gewoon even 'artsd' te draaien.

[Niek]

Ik heb even in de FAQ van Tux Racer gekeken (http://www.tuxracer.com/index.php?page=faq.php), en daar staat het volgende:

When I try to run Tux Racer under Linux, I get this error: Failed to set video mode Couldn't find matching GLX visual. Is there a work-around?


Yes. This usually means that Tux Racer is trying to run at a bits per pixel (BPP) setting that isn't supported by your current X Windows video mode. To fix this, edit the ~/.tuxracer-v1/options file and change the line that starts with

set bpp_mode

to

set bpp_mode 0

Mischien dat dit helpt?

[Verwijderd]

nee. dat is een van de vele dingen die ik al heb geprobeerd.

[Verwijderd]

Op donderdag 23 mei 2002 20:56 schreef MadEgg het volgende:

smpeg-0.4.4.1
sdl-mixer-1.2.3

Probeer die eens te installeren als je dat niet hebt, probeer dan nog eens...

Zijn al geïnstalleerd.

[MadEgg]

Op donderdag 23 mei 2002 21:01 schreef odysseus het volgende:

[..]

Je kunt proberen om dat ding met 'artsdsp tuxracer' op te starten. Als dat niet werkt dan moet je even een 'killall artsd' draaien, na het spelen kun je dan je geluid in KDE weer inschakelen door gewoon even 'artsd' te draaien.

Thx... artsdsp tuxracer werkt perfect, nu hoor ik Tux ook nog vreten

[blouweKip]

ipv Load "glx" kun je ook:

Load "/usr/X11R6/lib/modules/extensions/libglx.so"

proberen (als de glx driver tenminste op die locatie staat)

[urk_forever]

Op donderdag 23 mei 2002 17:21 schreef odysseus het volgende:
Hmm, dat is heel vaag. Hij zegt dat de extensie niet aanwezig is, maar die is er dus wel aangezien hij in de lijst met extensies staat. Ik mag aannemen dat glxgears dan ook niet werkt? Als je dat probeert te draaien, werkt dat dan en zo ja hoeveel frames haal je?

Glxgears werkt wel! Met 539 FPS.

[Niek]

Op vrijdag 24 mei 2002 09:25 schreef urk_forever het volgende:

[..]

Glxgears werkt wel! Met 539 FPS.

Dan ligt het dus aan de closed source versie van Tux Racer. Je kan wel de open source versie van tuxracer downloaden vanaf tuxracer.sf.net, die heeft dit probleem hoogstwaarschijnlijk niet.

[Verwijderd]

ja daar lijkt het wel op. Bij mij doet de opensource (0.61) versie het wel (en gears ook etc.) en de demo van 1.1 niet. Balen. Is best een leuk spel.

[urk_forever]

Nou heb ik die open-source versie gedownload alleen krijg ik een error tijdens het compilen. Ik moet GLUT of SDL installeren. Kan ik gewoon glut installeren? Of kan ik beter SDL nemen?

[Niek]

* kick *

Misschien een beetje laat, maar ik wou even melden dat Sunspire Studios een patch heeft uitgebracht voor dit probleem. Meer info staat op http://www.sunspirestudios.com/forums/tuxracer/viewtopic.php?topic=189&forum=2&3