[HP laserjet 4si] load letter?

[Verwijderd]

Hej, ik heb hiero nu drie mooie laserjet 4si staan, installen gaat allemaal goed enzo, maar als ik een printopdracht geef krijg ik de melding "load letter". Mn puter zegt na een tijdje dat het papier op is, maar allebei de laden zitten helemaal vol! Voordat ik de printopdracht geef zegtie dattie "00 ready" is!

Iemand enig idee wat ik moet veranderen?

[kieskes]

papier instellen op A4 en uit de 'onderste' lade

[FoolZero]

Waarschijnlijk moet je even controleren of er nog ergens een default setting op 'letter' staat i.p.v. A4. Met name onder WindowsNT 4.0 is dit wel een veel voorkomende situatie.

[Verwijderd]

HP LaserJet 4 Family Printers - PC, LC, or MP LOAD XXX Message Displayed on Control Panel

SOLUTION: Follow the steps below:
NOTE: The messages listed above can be cleared from the printer display by pressing the SHIFT and CONTINUE buttons on the printer simultaneously.

NOTE: Not all tray options are available with all HP LaserJet 4 family printers. This document does not apply to the HP LaserJet 4L/4ML printers.

Verify the media loaded into the desired tray on the printer is the correct size.
For example, if the message "MP Load Legal" is encountered, then verify that legal size paper is physically present in the MP (Multi-Purpose) tray. If the message "LC LOAD MONARCH" is encountered, then verify that Monarch paper is physically present in the LC (Lower Cassette) tray.
Verify the media size that the desired tray is configured for.
If using the universal PC (paper cassette) or LC (lower cassette), make sure the green paper size knob matches the desired media size. If selecting the MP tray for a document that requires legal size paper (for example), verify that the front panel shows that the MP tray is configured for legal.
Verifying front panel media settings for the LC or the PC tray
Press the ONLINE button to take the printer offline.
Press the MENU key until Printing Menu is displayed.
Press the ITEM key until Paper = XXX* is displayed.
If the paper size is not at the correct setting, click the plus (+) key until the correct paper size is displayed.
Press the ENTER key to place an asterisk next to the Paper setting. This saves the setting in the printer memory.
Press ONLINE to return the printer to ready.
Verifying front panel media settings for the MP tray
Press the ONLINE button to take the printer offline.
Press the MENU key until Printing Menu is displayed.
Press the ITEM key until MP Tray = Cassette is displayed. If this item is not displayed, press the ITEM key until MP Tray = FIRST appears in the printer display.
Press the ENTER key to place an asterisk next to the paper setting. This saves the setting in the printer memory.
Press the MENU key until Printing Menu is displayed
Press the ITEM key until Paper = XXX* is displayed.
If the paper size is not at the correct setting, click the plus (+) key until the correct paper size is displayed.
Press the ENTER key to place an asterisk next to the Paper setting. This saves the setting in the printer memory.
Press ONLINE to return the printer to ready.
Verify that the media size selected from within the software application is correct.
The example below verifies the Page Setup in Microsoft (R) Word for Windows 6.0 (the method of verification will be different for each software application):
From within Microsoft Word for Windows 6.0 (with the document on screen), select File, then Page Setup.
Select the Paper Size tab.
Verify that the paper size indicated is correct. If not, change it to the correct size.
Click the Paper Source tab.
Verify that the tray associated with the selected paper size is chosen. Click OK. Print document.