Wat doet de 12volt plug onder je ATX plug?

Pagina: 1
Acties:

  • cool0
  • Registratie: Februari 2001
  • Laatst online: 14-06 16:49
Ik heb een ANUS P4B I845

Nu zit er onder me ATX aansluting een normale 12volt plug waar AUX bij staat waar is dat ding voor? In me handleiding stond er niks over.

Ik vrees niet de man die 10.000 trappen heeft beoefend maar de man die 1 trap 10.000 keer heeft geoefend


  • Delta2
  • Registratie: November 2000
  • Laatst online: 09-08 09:31
Misschien iets voor een speciale Fan ofzow ?
kzou het verder ook niet weten, is het enige dat mij inviel

DRIVER_IRQL_NOT_LESS_OR_EQUAL == DRIVER_IRQL_IS_SUPERIOR :)


  • Badger
  • Registratie: November 2000
  • Laatst online: 01-09-2025
aux - auxilery

Voor als je misschien erg heftig gaat overklokken :P

Geen id eigenlijk waar het verder voor kan dienen.
Kijk es in een manual of op de site van de fabrikant

  • cool0
  • Registratie: Februari 2001
  • Laatst online: 14-06 16:49
Ja daar heb ik niks over kunnen vinden in de handleiding.

Ik vrees niet de man die 10.000 trappen heeft beoefend maar de man die 1 trap 10.000 keer heeft geoefend


  • cool0
  • Registratie: Februari 2001
  • Laatst online: 14-06 16:49
Denk dat dit hem is.

ASUS EZ Plug

The patented ASUS technology lets you use your existing power supply rathere than buying a new ATX 12V power supply. The ASUS EZ Plug connector is a 4-pin auxillary +12V connector mounted on the motherboard that connects a regular 4-pin device power connector from the power supply. This connector is necessary to provide the additional power required by the P4 CPU.

Dus dat is voor je cpu als je nog geen p4 cpu heb.

Ik vrees niet de man die 10.000 trappen heeft beoefend maar de man die 1 trap 10.000 keer heeft geoefend


  • Badger
  • Registratie: November 2000
  • Laatst online: 01-09-2025
ASUS is one of the first motherboard manufactures to offer a P4 motherboard where you DON'T have to have an ATX 2.03 Power supply. The board is supplied with the 12v AUX connector for users with a 2.03 ATX PSU, but if you are the customer looking for a P4 but not going overboard on upgrading memory and PSU, then this board is for you. ASUS has added a 4-pin molex connector (identical to the ones used for the HDD/CD power plugs) next to the ATX power connector. This allows you to plug in a HDD/CD power connector to the motherboard and there you go, P4 without the ATX 2.03 PSU. Well done ASUS!


PSU dus en niet voor als je geen CPU hebt :D

  • cool0
  • Registratie: Februari 2001
  • Laatst online: 14-06 16:49
Ja dat bedoelde ik ook beetje foute zin.

Ik vrees niet de man die 10.000 trappen heeft beoefend maar de man die 1 trap 10.000 keer heeft geoefend


  • Badger
  • Registratie: November 2000
  • Laatst online: 01-09-2025
ennuh ik zie dat het wel gewoon in de manual staat :)


pag 1-3

Verwijderd

Sluit gewoon aan kan geen kwaad, is extra power als die het eens nodig heeft. Ik heb ze alle drie aangesloten op Asus P4-TE.
Pagina: 1