Toon posts:

Ip adres vinden

Pagina: 1
Acties:

Verwijderd

Topicstarter
Ik heb hier een 3com ISDN Office Connect staan.
Hier ben ik het IP adres van kwijt... Ook de Seriele verbinding krijg ik niet tot stand...
Weet iemand (als het mogelijk is) hoe ik het IP-adres kan achterhalen van dat apparaat.... Misschien met behulp van het HARDWARE adress of zo..???

Whelp...

Verwijderd

de bijgeleverde 3com software zal daar toch wel een tooltje voor hebben?

  • GaveGozer
  • Registratie: Februari 2000
  • Laatst online: 25-09-2025

GaveGozer

That's Me

kun je niet net zoals bij een ethernet kaart
ipconfig /all intikken in de command line van de "dos prompt"

Ik was hier en ai 't nie geleuf dan maak ik ow so wat anders wies!


Verwijderd

Op dinsdag 22 januari 2002 17:45 schreef GaveGozer het volgende:
kun je niet net zoals bij een ethernet kaart
ipconfig /all intikken in de command line van de "dos prompt"
Of winipcfg bij 9x versies.

  • Twynn
  • Registratie: Maart 2001
  • Laatst online: 14-08 09:13
Wordt dat ding als router gebruikt voor een inet-verbinding? Dan kun je hem misschien aan de default-gateway herkennen..

  • Oscar the Grouch
  • Registratie: Augustus 2000
  • Laatst online: 15-08 10:14

Oscar the Grouch

Ex-Admin

Question everything

Move [forum=6] >> [forum=4]

 I don't know half of you half as well as I should like; and I like less than half of you half as well as you deserve


Verwijderd

Op dinsdag 22 januari 2002 17:02 schreef Jammed het volgende:
Ik heb hier een 3com ISDN Office Connect staan.
Hier ben ik het IP adres van kwijt... Ook de Seriele verbinding krijg ik niet tot stand...
Weet iemand (als het mogelijk is) hoe ik het IP-adres kan achterhalen van dat apparaat.... Misschien met behulp van het HARDWARE adress of zo..???

Whelp...
factory default: http://192.168.1.1/mainpage

Q. How do I reset my LAN Modem back to its factory settings?

A. To reset the LAN Modem to its factory default setting, connect a telephone to one of the Phone ports (disconnect the ISDN line) and then press **3266# from the handset. An alternative method is to go the the LAN Modem's main configuration screen and click on Maintenance, then Reset and restore factory defaults.

Meer nodig:
http://support.3com.com/infodeli/tools/remote/lanmodem/3c892/3c892faq.html
Pagina: 1