compaq bios upgrade - Processors, moederborden en geheugen

vrijdag 18 januari 2002 13:07

Acties:

Verwijderd

Topicstarter

Ik heb hier een Compaq Presario 7591 staan (ja ik weet et ik ben dom

)
Alleen dat ding vertoont wat kuren

als ik me soundcard use hangt me pc na een paar minuten ;/
dit is niet alleen onder windows, maar ook onder linux

Nu d8 ik dat ik het irq moest changen..
Want die is namelijk etzelfde als me videokaart en nogwat.
alleen als ik die irq van me soundcard in me bios change, flippen die videokaart en dat andere ding mee.
ik verander ze dus alle 3 tegelijk en daar schiet ik nog niets mee op

Ik denk dat ik me bios moet upgraden, alleen weet ik daar niet zo veel van.
Iemand tips?

vrijdag 18 januari 2002 13:26

Acties:

Verwijderd

compaq bios updaten, ik ben bang dat dat niet gaat.
compaq heeft zo'n eigen trut bios waar je echt geen zak mee kan

misschiend at compaq het zelf weet maar bij mijn weten kun je compaq bios'es niet updaten

vrijdag 18 januari 2002 13:30

Acties:

ChUcKiE

Dus........

Zelfs een Compaq Bios kun je gewoon upgraden hoor...

Kijk hier eens:

http://web14.compaq.com/falco/sp_syn.asp?detail=yes&recid=SP18321

SP18321

Presario System ROM 686C3 Update for Specific Models

Est. Download Time:
(33.6K-56K Modem): < 2 min
(256K-300K DSL/Cable): < 18 sec

Description:

ROMPaqs are not OS specific, but your factory warranty covers technical support for the originally installed OS only.

Please refer to the text to insure that your model is listed. Installing this on a system that it is not designed for may render your computer useless.

NOTICE: This SoftPaq is for specific Presario models. Please refer to text file to see if this SoftPaq is for your model BEFORE installing.

This SoftPaq contains files used to restore or update the System ROM for the Compaq Presario Models listed above, which have a 686C3 ROM, to ROM Version 04/18/01. This is the same ROM Version released in a previous SoftPaq. The difference is that this SoftPaq supports Windows Flash capability.

This SoftPaq is used to update the System ROM on target PCs in a Microsoft Windows Operating System environment (see Operating Systems above).

Enhancements/Fixes:
Supports Windows Flash capability.
The following were fixed in SP17455 and are also included in this SoftPaq:
Fixed Chicony USB keyboard lockup during POST.
Added POST message for missing keyboard.
Added F10 Setup Detect Drive feature for IDE and floppy drives.
Added quiet drive ATA6 acoustic management support.
Enhancements to Power Loss Management feature.
Added 48-bit LBA boot support to handle drives bigger than 128GB.
Fix mouse loss on resume from hibernate.
Fixed very slow boot with Canon BJ 870PFD USB printer.
Added workaround for Logitech Quickcam hang during POST.
Added CPU patch for new Coppermine D0 CPU (CPUID = 68Ah).
Fixed Windows 2000 load hang.
The following were fixed in SP15894, SP15675, SP14017, SP13520 and are also included in this SoftPaq:
Enhanced USB legacy handoffs. Fixes USB mouse hang.
Fixed nonfunctional LEDs on International Venice keyboards.
Added support for SST 2M firmware hub.
Fixed intermittent 102 System Board POST error.
Fixed issue when PS/2 mouse is not connected, and other error conditions.
Improved USB support in DOS and Windows safe mode.
Shortened BIOS POST (Power On Self Test) time.
Resolved several issues with 3rd party video cards.
Fixed multi-monitor support for several 3rd party video cards.
Enhanced boot options in BIOS setup.
Added support for latest Processors.
Updated video BIOS.
Fixes an issue of system rebooting when shutting down by preventing USB enumeration by the Operating System at shutdown.
Changes memory buffer strength for configurations of two double sized memory modules.
Adds support for new processor versions, including the latest CPU patches from Intel.

Language Affected:

English (US)

Software Version:

1.05 Rev. A

Date Effective:

Fri Jul 20 00:00:00 CDT 2001

OS System:

Windows XP Home Edition, Microsoft Windows 2000, Microsoft Windows 98, Microsoft Windows Me

File Size:

498 K