[Slackware 8.0] Krijg x-windows niet aan de gang

[Verwijderd]

Ik heb zelf een Hercules 3d Prophet 4500 64 MB kaart in mijn pc zitten maar ik krijg deze videokaart niet goed ingesteld in xf86config
Hij crasht de hele tijd als ik startx intyp

Weet iemand hoe dit zou komen?

[Sihaya]

Dat is toch een kaart met kyro 2 chip? Je zult nog tot februari moeten wachten op een kyro2 driver.
Of je moet er geen bezwaar tegen hebben om in unaccelerated frame buffer modus te werken.

[Verwijderd]

Op woensdag 26 december 2001 14:41 schreef Sihaya het volgende:
Dat is toch een kaart met kyro 2 chip? Je zult nog tot februari moeten wachten op een kyro2 driver.
Of je moet er geen bezwaar tegen hebben om in unaccelerated frame buffer modus te werken.

Mag ik vragen hoe je dit aan de gang krijgt zo'n modus ?
Ik krijg nu wel als ik startx doe een scherm met wat blauwe strepen maar dan hangt de pc vast

[stiena]

Op woensdag 26 december 2001 15:58 schreef Liquidus het volgende:

[..]

Mag ik vragen hoe je dit aan de gang krijgt zo'n modus ?
Ik krijg nu wel als ik startx doe een scherm met wat blauwe strepen maar dan hangt de pc vast

XF86Setup kan je het instellen (generic vga kaart) enzow.

[Verwijderd]

Op woensdag 26 december 2001 15:58 schreef Liquidus het volgende:

[..]

Mag ik vragen hoe je dit aan de gang krijgt zo'n modus ?
Ik krijg nu wel als ik startx doe een scherm met wat blauwe strepen maar dan hangt de pc vast

Je moet:
- framebuffer device support in je kernel compilen
- wat er nu achter Driver staat bij je videokaart in /etc/X11/XF86Config vervangen door "fbdev"
- vga = 791 in je lilo.conf zetten (en lilo runnen, maar dat moest je toch al vanwege de nieuwe kernel)

[Verwijderd]

Op woensdag 26 december 2001 16:03 schreef edwinv het volgende:

[..]

Je moet:
- framebuffer device support in je kernel compilen
- wat er nu achter Driver staat bij je videokaart in /etc/X11/XF86Config vervangen door "fbdev"
- vga = 791 in je lilo.conf zetten (en lilo runnen, maar dat moest je toch al vanwege de nieuwe kernel)

Hoe doe ik dit??? SOrry dat ik een beetje n00b overkom

[Sihaya]

Als ik me niet vergis staat dit standaard aan bij een verse Slackware 8 installatie.
Bestanden kun je bewerken met bv. pico of vim

[Verwijderd]

OK, het is me nog steeds niet gelukt om te doen. Ik zal jullie even mijn errorlog laten zien en mijn XF86Config file

XF86Config:

code:

# File generated by xf86config.

#
# Copyright (c) 1999 by The XFree86 Project, Inc.
#
# Permission is hereby granted, free of charge, to any person obtaining a
# copy of this software and associated documentation files (the "Software"),
# to deal in the Software without restriction, including without limitation
# the rights to use, copy, modify, merge, publish, distribute, sublicense,
# and/or sell copies of the Software, and to permit persons to whom the
# Software is furnished to do so, subject to the following conditions:
# 
# The above copyright notice and this permission notice shall be included in
# all copies or substantial portions of the Software.
# 
# THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
# IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
# FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT.  IN NO EVENT SHALL
# THE XFREE86 PROJECT BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
# WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF
# OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
# SOFTWARE.
# 
# Except as contained in this notice, the name of the XFree86 Project shall
# not be used in advertising or otherwise to promote the sale, use or other
# dealings in this Software without prior written authorization from the
# XFree86 Project.
#

# **********************************************************************
# Refer to the XF86Config(4/5) man page for details about the format of 
# this file.
# **********************************************************************

# **********************************************************************
# Module section -- this  section  is used to specify
# which dynamically loadable modules to load.
# **********************************************************************
#
Section "Module"

# This loads the DBE extension module.

    Load      "dbe"   # Double buffer extension

# This loads the miscellaneous extensions module, and disables
# initialisation of the XFree86-DGA extension within that module.
    SubSection  "extmod"
    Option    "omit xfree86-dga"   # don't initialise the DGA extension
    EndSubSection

# This loads the Type1 and FreeType font modules
    Load      "type1"
    Load      "freetype"

# This loads the GLX module
#    Load    "glx"

EndSection

# **********************************************************************
# Files section.  This allows default font and rgb paths to be set
# **********************************************************************

Section "Files"

# The location of the RGB database.  Note, this is the name of the
# file minus the extension (like ".txt" or ".db").  There is normally
# no need to change the default.

    RgbPath "/usr/X11R6/lib/X11/rgb"

# Multiple FontPath entries are allowed (which are concatenated together),
# as well as specifying multiple comma-separated entries in one FontPath
# command (or a combination of both methods)
# 
# If you don't have a floating point coprocessor and emacs, Mosaic or other
# programs take long to start up, try moving the Type1 and Speedo directory
# to the end of this list (or comment them out).
# 

    FontPath   "/usr/X11R6/lib/X11/fonts/local/"
    FontPath   "/usr/X11R6/lib/X11/fonts/misc/"
    FontPath   "/usr/X11R6/lib/X11/fonts/75dpi/:unscaled"
    FontPath   "/usr/X11R6/lib/X11/fonts/100dpi/:unscaled"
    FontPath   "/usr/X11R6/lib/X11/fonts/Type1/"
    FontPath   "/usr/X11R6/lib/X11/fonts/Speedo/"
    FontPath   "/usr/X11R6/lib/X11/fonts/75dpi/"
    FontPath   "/usr/X11R6/lib/X11/fonts/100dpi/"

# The module search path.  The default path is shown here.

#    ModulePath "/usr/X11R6/lib/modules"

EndSection

# **********************************************************************
# Server flags section.
# **********************************************************************

Section "ServerFlags"

# Uncomment this to cause a core dump at the spot where a signal is 
# received.  This may leave the console in an unusable state, but may
# provide a better stack trace in the core dump to aid in debugging

#    Option "NoTrapSignals"

# Uncomment this to disable the <Crtl><Alt><BS> server abort sequence
# This allows clients to receive this key event.

#    Option "DontZap"

# Uncomment this to disable the <Crtl><Alt><KP_+>/<KP_-> mode switching
# sequences.  This allows clients to receive these key events.

#    Option "Dont Zoom"

# Uncomment this to disable tuning with the xvidtune client. With
# it the client can still run and fetch card and monitor attributes,
# but it will not be allowed to change them. If it tries it will
# receive a protocol error.

#    Option "DisableVidModeExtension"

# Uncomment this to enable the use of a non-local xvidtune client. 

#    Option "AllowNonLocalXvidtune"

# Uncomment this to disable dynamically modifying the input device
# (mouse and keyboard) settings. 

#    Option "DisableModInDev"

# Uncomment this to enable the use of a non-local client to
# change the keyboard or mouse settings (currently only xset).

#    Option "AllowNonLocalModInDev"

EndSection

# **********************************************************************
# Input devices
# **********************************************************************

# **********************************************************************
# Core keyboard's InputDevice section
# **********************************************************************

Section "InputDevice"

    Identifier  "Keyboard1"
    Driver  "Keyboard"
# For most OSs the protocol can be omitted (it defaults to "Standard").
# When using XQUEUE (only for SVR3 and SVR4, but not Solaris),
# uncomment the following line.

#    Option     "Protocol"  "Xqueue"

    Option "AutoRepeat" "500 30"

# Specify which keyboard LEDs can be user-controlled (eg, with xset(1))
#    Option "Xleds" "1 2 3"

#    Option "LeftAlt"     "Meta"
#    Option "RightAlt"    "ModeShift"

# To customise the XKB settings to suit your keyboard, modify the
# lines below (which are the defaults).  For example, for a non-U.S.
# keyboard, you will probably want to use:
#    Option "XkbModel"    "pc102"
# If you have a US Microsoft Natural keyboard, you can use:
#    Option "XkbModel"    "microsoft"
#
# Then to change the language, change the Layout setting.
# For example, a german layout can be obtained with:
#    Option "XkbLayout"   "de"
# or:
#    Option "XkbLayout"   "de"
#    Option "XkbVariant"  "nodeadkeys"
#
# If you'd like to switch the positions of your capslock and
# control keys, use:
#    Option "XkbOptions"  "ctrl:swapcaps"

# These are the default XKB settings for XFree86
#    Option "XkbRules"    "xfree86"
#    Option "XkbModel"    "pc101"
#    Option "XkbLayout"   "us"
#    Option "XkbVariant"  ""
#    Option "XkbOptions"  ""

#    Option "XkbDisable"

    Option "XkbRules"   "xfree86"
    Option "XkbModel"   "pc104"
    Option "XkbLayout"  "us"

EndSection


# **********************************************************************
# Core Pointer's InputDevice section
# **********************************************************************

Section "InputDevice"

# Identifier and driver

    Identifier  "Mouse1"
    Driver  "mouse"
    Option "Protocol"    "PS/2"
    Option "Device" "/dev/mouse"

# When using XQUEUE, comment out the above two lines, and uncomment
# the following line.

#    Option "Protocol"  "Xqueue"

# Baudrate and SampleRate are only for some Logitech mice. In
# almost every case these lines should be omitted.

#    Option "BaudRate"  "9600"
#    Option "SampleRate"    "150"

# Emulate3Buttons is an option for 2-button Microsoft mice
# Emulate3Timeout is the timeout in milliseconds (default is 50ms)

    Option "Emulate3Buttons"
#    Option "Emulate3Timeout"    "50"

# ChordMiddle is an option for some 3-button Logitech mice

#    Option "ChordMiddle"

EndSection


# **********************************************************************
# Other input device sections 
# this is optional and is required only if you
# are using extended input devices.  This is for example only.  Refer
# to the XF86Config man page for a description of the options.
# **********************************************************************
#
# Section "InputDevice" 
#    Identifier  "Mouse2"
#    Driver "mouse"
#    Option "Protocol"  "MouseMan"
#    Option "Device"      "/dev/mouse2"
# EndSection
#
# Section "InputDevice"
#    Identifier "spaceball"
#    Driver     "magellan"
#    Option     "Device"      "/dev/cua0"
# EndSection
#
# Section "InputDevice"
#    Identifier "spaceball2"
#    Driver     "spaceorb"
#    Option     "Device"      "/dev/cua0"
# EndSection
#
# Section "InputDevice"
#    Identifier "touchscreen0"
#    Driver     "microtouch"
#    Option     "Device"      "/dev/ttyS0"
#    Option     "MinX"      "1412"
#    Option     "MaxX"      "15184"
#    Option     "MinY"      "15372"
#    Option     "MaxY"      "1230"
#    Option     "ScreenNumber"  "0"
#    Option     "ReportingMode" "Scaled"
#    Option     "ButtonNumber"  "1"
#    Option     "SendCoreEvents"
# EndSection
#
# Section "InputDevice"
#    Identifier "touchscreen1"
#    Driver     "elo2300"
#    Option     "Device"      "/dev/ttyS0"
#    Option     "MinX"      "231"
#    Option     "MaxX"      "3868"
#    Option     "MinY"      "3858"
#    Option     "MaxY"      "272"
#    Option     "ScreenNumber"  "0"
#    Option     "ReportingMode" "Scaled"
#    Option     "ButtonThreshold"    "17"
#    Option     "ButtonNumber"  "1"
#    Option     "SendCoreEvents"
# EndSection

# **********************************************************************
# Monitor section
# **********************************************************************

# Any number of monitor sections may be present

Section "Monitor"

    Identifier  "Adi"

# HorizSync is in kHz unless units are specified.
# HorizSync may be a comma separated list of discrete values, or a
# comma separated list of ranges of values.
# NOTE: THE VALUES HERE ARE EXAMPLES ONLY.  REFER TO YOUR MONITOR'S
# USER MANUAL FOR THE CORRECT NUMBERS.

    HorizSync   31.5 - 79.0

#    HorizSync  30-64      # multisync
#    HorizSync  31.5, 35.2    # multiple fixed sync frequencies
#    HorizSync  15-25, 30-50  # multiple ranges of sync frequencies

# VertRefresh is in Hz unless units are specified.
# VertRefresh may be a comma separated list of discrete values, or a
# comma separated list of ranges of values.
# NOTE: THE VALUES HERE ARE EXAMPLES ONLY.  REFER TO YOUR MONITOR'S
# USER MANUAL FOR THE CORRECT NUMBERS.

    VertRefresh 50-90

EndSection


# **********************************************************************
# Graphics device section
# **********************************************************************

# Any number of graphics device sections may be present

# Standard VGA Device:

Section "Device"
    Identifier  "Standard VGA"
    VendorName  "Unknown"
    BoardName   "Unknown"

# The chipset line is optional in most cases.  It can be used to override
# the driver's chipset detection, and should not normally be specified.

#    Chipset    "generic"

# The Driver line must be present.  When using run-time loadable driver
# modules, this line instructs the server to load the specified driver
# module.  Even when not using loadable driver modules, this line
# indicates which driver should interpret the information in this section.

    Driver     "fbdev"
# The BusID line is used to specify which of possibly multiple devices
# this section is intended for.  When this line isn't present, a device
# section can only match up with the primary video device.  For PCI
# devices a line like the following could be used.  This line should not
# normally be included unless there is more than one video device
# intalled.

#    BusID  "PCI:0:10:0"

#    VideoRam   256

#    Clocks 25.2 28.3

EndSection

# Device configured by xf86config:

Section "Device"
    Identifier  "Prophet"
    Driver  "fbdev"
    #VideoRam    65536
    # Insert Clocks lines here if appropriate
EndSection


# **********************************************************************
# Screen sections
# **********************************************************************

# Any number of screen sections may be present.  Each describes
# the configuration of a single screen.  A single specific screen section
# may be specified from the X server command line with the "-screen"
# option.
Section "Screen"
    Identifier  "Screen 1"
    Device  "Prophet"
    Monitor     "Adi"
    DefaultDepth 8

    Subsection "Display"
      Depth  8
      Modes  "640x480" "800x600" "1024x768" "1280x1024"
      ViewPort    0 0
    EndSubsection
    Subsection "Display"
      Depth  16
      Modes  "640x480" "800x600" "1024x768" "1280x1024"
      ViewPort    0 0
    EndSubsection
    Subsection "Display"
      Depth  24
      Modes  "640x480" "800x600" "1024x768" "1280x1024"
      ViewPort    0 0
    EndSubsection
EndSection

# **********************************************************************
# ServerLayout sections.
# **********************************************************************

# Any number of ServerLayout sections may be present.  Each describes
# the way multiple screens are organised.  A specific ServerLayout
# section may be specified from the X server command line with the
# "-layout" option.  In the absence of this, the first section is used.
# When now ServerLayout section is present, the first Screen section
# is used alone.

Section "ServerLayout"

# The Identifier line must be present
    Identifier  "Simple Layout"

# Each Screen line specifies a Screen section name, and optionally
# the relative position of other screens.  The four names after
# primary screen name are the screens to the top, bottom, left and right
# of the primary screen.  In this example, screen 2 is located to the
# right of screen 1.

    Screen "Screen 1"

# Each InputDevice line specifies an InputDevice section name and
# optionally some options to specify the way the device is to be
# used.  Those options include "CorePointer", "CoreKeyboard" and
# "SendCoreEvents".

    InputDevice "Mouse1" "CorePointer"
    InputDevice "Keyboard1" "CoreKeyboard"

EndSection

Errorlog:

code:

XFree86 Version 4.1.0 / X Window System
(protocol Version 11, revision 0, vendor release 6510)
Release Date: 2 June 2001
    If the server is older than 6-12 months, or if your card is
    newer than the above date, look for a newer version before
    reporting problems.  (See http://www.XFree86.Org/FAQ)
Build Operating System: Linux 2.2.19 i686 [ELF] 
Module Loader present
(==) Log file: "/var/log/XFree86.0.log", Time: Wed Dec 26 18:47:35 2001
(==) Using config file: "/etc/X11/XF86Config"
Markers: (--) probed, (**) from config file, (==) default setting,
       (++) from command line, (!!) notice, (II) informational,
       (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) ServerLayout "Simple Layout"
(**) |-->Screen "Screen 1" (0)
(**) |   |-->Monitor "Adi"
(**) |   |-->Device "Prophet"
(**) |-->Input Device "Mouse1"
(**) |-->Input Device "Keyboard1"
(**) Option "AutoRepeat" "500 30"
(**) Option "XkbRules" "xfree86"
(**) XKB: rules: "xfree86"
(**) Option "XkbModel" "pc104"
(**) XKB: model: "pc104"
(**) Option "XkbLayout" "us"
(**) XKB: layout: "us"
(==) Keyboard: CustomKeycode disabled
(**) FontPath set to "/usr/X11R6/lib/X11/fonts/local/,/usr/X11R6/lib/X11/fonts/misc/,/usr/X11R6/lib/X11/fonts/75dpi/:unscaled,/usr/X11R6/lib/X11/fonts/100dpi/:unscaled,/usr/X11R6/lib/X11/fonts/Type1/,/usr/X11R6/lib/X11/fonts/Speedo/,/usr/X11R6/lib/X11/fonts/75dpi/,/usr/X11R6/lib/X11/fonts/100dpi/"
(**) RgbPath set to "/usr/X11R6/lib/X11/rgb"
(==) ModulePath set to "/usr/X11R6/lib/modules"
(--) using VT number 7

(WW) Cannot open APM
(II) Module ABI versions:
    XFree86 ANSI C Emulation: 0.1
    XFree86 Video Driver: 0.4
    XFree86 XInput driver : 0.2
    XFree86 Server Extension : 0.1
    XFree86 Font Renderer : 0.2
(II) Loader running on linux
(II) LoadModule: "bitmap"
(II) Loading /usr/X11R6/lib/modules/fonts/libbitmap.a
(II) Module bitmap: vendor="The XFree86 Project"
    compiled for 4.1.0, module version = 1.0.0
    Module class: XFree86 Font Renderer
    ABI class: XFree86 Font Renderer, version 0.2
(II) Loading font Bitmap
(II) LoadModule: "pcidata"
(II) Loading /usr/X11R6/lib/modules/libpcidata.a
(II) Module pcidata: vendor="The XFree86 Project"
    compiled for 4.1.0, module version = 0.1.0
    ABI class: XFree86 Video Driver, version 0.4
(II) PCI: Probing config type using method 1
(II) PCI: Config type is 1
(II) PCI: stages = 0x03, oldVal1 = 0x8000083c, mode1Res1 = 0x80000000
(II) PCI: PCI scan (all values are in hex)
(II) PCI: 00:00:0: chip 8086,7190 card 0000,0000 rev 03 class 06,00,00 hdr 00
(II) PCI: 00:01:0: chip 8086,7191 card 0000,0000 rev 03 class 06,04,00 hdr 01
(II) PCI: 00:07:0: chip 8086,7110 card 0000,0000 rev 02 class 06,01,00 hdr 80
(II) PCI: 00:07:1: chip 8086,7111 card 0000,0000 rev 01 class 01,01,80 hdr 00
(II) PCI: 00:07:2: chip 8086,7112 card 0000,0000 rev 01 class 0c,03,00 hdr 00
(II) PCI: 00:07:3: chip 8086,7113 card 0000,0000 rev 02 class 06,80,00 hdr 00
(II) PCI: 00:09:0: chip 1011,0014 card 0000,0000 rev 21 class 02,00,00 hdr 00
(II) PCI: 00:0a:0: chip 11c1,044a card 144f,1005 rev 01 class 07,80,00 hdr 00
(II) PCI: 00:0b:0: chip 9004,5078 card 0000,0000 rev 01 class 01,00,00 hdr 00
(II) PCI: 01:00:0: chip 104a,0010 card 1681,0010 rev 07 class 03,00,00 hdr 00
(II) PCI: End of PCI scan
(II) LoadModule: "scanpci"
(II) Loading /usr/X11R6/lib/modules/libscanpci.a
(II) Module scanpci: vendor="The XFree86 Project"
    compiled for 4.1.0, module version = 0.1.0
    ABI class: XFree86 Video Driver, version 0.4
(II) UnloadModule: "scanpci"
(II) Unloading /usr/X11R6/lib/modules/libscanpci.a
(II) Host-to-PCI bridge:
(II) PCI-to-ISA bridge:
(II) PCI-to-PCI bridge:
(II) Bus 0: bridge is at (0:0:0), (-1,0,0), BCTRL: 0x08 (VGA_EN is set)
(II) Bus 0 I/O range:
    [0] -1  0x00000000 - 0x0000ffff (0x10000) IX[B]
(II) Bus 0 non-prefetchable memory range:
    [0] -1  0x00000000 - 0xffffffff (0x0) MX[B]
(II) Bus 0 prefetchable memory range:
    [0] -1  0x00000000 - 0xffffffff (0x0) MX[B]
(II) Bus 1: bridge is at (0:1:0), (0,1,1), BCTRL: 0x88 (VGA_EN is set)
(II) Bus 1 I/O range:
    [0] -1  0x0000e000 - 0x0000efff (0x1000) IX[B]
(II) Bus 1 non-prefetchable memory range:
    [0] -1  0xf4000000 - 0xf4ffffff (0x1000000) MX[B]
(II) Bus 1 prefetchable memory range:
    [0] -1  0xe0000000 - 0xefffffff (0x10000000) MX[B]
(II) Bus -1: bridge is at (0:7:0), (0,-1,0), BCTRL: 0x08 (VGA_EN is set)
(II) Bus -1 I/O range:
(II) Bus -1 non-prefetchable memory range:
(II) Bus -1 prefetchable memory range:
(--) PCI:*(1:0:0) SGS-Thomson unknown chipset (0x0010) rev 7, Mem @ 0xe0000000/27, 0xe8000000/19, I/O @ 0xe000/8
(II) Addressable bus resource ranges are
    [0] -1  0x00000000 - 0xffffffff (0x0) MX[B]
    [1] -1  0x00000000 - 0x0000ffff (0x10000) IX[B]
(II) OS-reported resource ranges:
    [0] -1  0xffe00000 - 0xffffffff (0x200000) MX[B](B)
    [1] -1  0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
    [2] -1  0x000f0000 - 0x000fffff (0x10000) MX[B]
    [3] -1  0x000c0000 - 0x000effff (0x30000) MX[B]
    [4] -1  0x00000000 - 0x0009ffff (0xa0000) MX[B]
    [5] -1  0x0000ffff - 0x0000ffff (0x1) IX[B]
    [6] -1  0x00000000 - 0x000000ff (0x100) IX[B]
(II) Active PCI resource ranges:
    [0] -1  0xf6002000 - 0xf6003fff (0x2000) MX[B]E
    [1] -1  0xf6001000 - 0xf6001fff (0x1000) MX[B]E
    [2] -1  0xf6000000 - 0xf7ffffff (0x2000000) MX[B]E
    [3] -1  0xf0000000 - 0xf3ffffff (0x4000000) MX[B]E
    [4] -1  0xe8000000 - 0xe807ffff (0x80000) MX[B](B)
    [5] -1  0xe0000000 - 0xe7ffffff (0x8000000) MX[B](B)
    [6] -1  0x00007400 - 0x000074ff (0x100) IX[B]E
    [7] -1  0x00007000 - 0x000070ff (0x100) IX[B]E
    [8] -1  0x00006c00 - 0x00006cff (0x100) IX[B]E
    [9] -1  0x00006800 - 0x000068ff (0x100) IX[B]E
    [10] -1 0x00006400 - 0x000064ff (0x100) IX[B]E
    [11] -1 0x0000f000 - 0x0000f0ff (0x100) IX[B]E
    [12] -1 0x0000e000 - 0x0000e0ff (0x100) IX[B](B)
(II) PCI Memory resource overlap reduced 0xf6000000 from 0xf7ffffff to 0xf6000fff
(II) Active PCI resource ranges after removing overlaps:
    [0] -1  0xf6002000 - 0xf6003fff (0x2000) MX[B]E
    [1] -1  0xf6001000 - 0xf6001fff (0x1000) MX[B]E
    [2] -1  0xf6000000 - 0xf6000fff (0x1000) MX[B]E
    [3] -1  0xf0000000 - 0xf3ffffff (0x4000000) MX[B]E
    [4] -1  0xe8000000 - 0xe807ffff (0x80000) MX[B](B)
    [5] -1  0xe0000000 - 0xe7ffffff (0x8000000) MX[B](B)
    [6] -1  0x00007400 - 0x000074ff (0x100) IX[B]E
    [7] -1  0x00007000 - 0x000070ff (0x100) IX[B]E
    [8] -1  0x00006c00 - 0x00006cff (0x100) IX[B]E
    [9] -1  0x00006800 - 0x000068ff (0x100) IX[B]E
    [10] -1 0x00006400 - 0x000064ff (0x100) IX[B]E
    [11] -1 0x0000f000 - 0x0000f0ff (0x100) IX[B]E
    [12] -1 0x0000e000 - 0x0000e0ff (0x100) IX[B](B)
(II) OS-reported resource ranges after removing overlaps with PCI:
    [0] -1  0xffe00000 - 0xffffffff (0x200000) MX[B](B)
    [1] -1  0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
    [2] -1  0x000f0000 - 0x000fffff (0x10000) MX[B]
    [3] -1  0x000c0000 - 0x000effff (0x30000) MX[B]
    [4] -1  0x00000000 - 0x0009ffff (0xa0000) MX[B]
    [5] -1  0x0000ffff - 0x0000ffff (0x1) IX[B]
    [6] -1  0x00000000 - 0x000000ff (0x100) IX[B]
(II) All system resource ranges:
    [0] -1  0xffe00000 - 0xffffffff (0x200000) MX[B](B)
    [1] -1  0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
    [2] -1  0x000f0000 - 0x000fffff (0x10000) MX[B]
    [3] -1  0x000c0000 - 0x000effff (0x30000) MX[B]
    [4] -1  0x00000000 - 0x0009ffff (0xa0000) MX[B]
    [5] -1  0xf6002000 - 0xf6003fff (0x2000) MX[B]E
    [6] -1  0xf6001000 - 0xf6001fff (0x1000) MX[B]E
    [7] -1  0xf6000000 - 0xf6000fff (0x1000) MX[B]E
    [8] -1  0xf0000000 - 0xf3ffffff (0x4000000) MX[B]E
    [9] -1  0xe8000000 - 0xe807ffff (0x80000) MX[B](B)
    [10] -1 0xe0000000 - 0xe7ffffff (0x8000000) MX[B](B)
    [11] -1 0x0000ffff - 0x0000ffff (0x1) IX[B]
    [12] -1 0x00000000 - 0x000000ff (0x100) IX[B]
    [13] -1 0x00007400 - 0x000074ff (0x100) IX[B]E
    [14] -1 0x00007000 - 0x000070ff (0x100) IX[B]E
    [15] -1 0x00006c00 - 0x00006cff (0x100) IX[B]E
    [16] -1 0x00006800 - 0x000068ff (0x100) IX[B]E
    [17] -1 0x00006400 - 0x000064ff (0x100) IX[B]E
    [18] -1 0x0000f000 - 0x0000f0ff (0x100) IX[B]E
    [19] -1 0x0000e000 - 0x0000e0ff (0x100) IX[B](B)
(II) LoadModule: "dbe"
(II) Loading /usr/X11R6/lib/modules/extensions/libdbe.a
(II) Module dbe: vendor="The XFree86 Project"
    compiled for 4.1.0, module version = 1.0.0
    Module class: XFree86 Server Extension
    ABI class: XFree86 Server Extension, version 0.1
(II) Loading extension DOUBLE-BUFFER
(II) LoadModule: "extmod"
(II) Loading /usr/X11R6/lib/modules/extensions/libextmod.a
(II) Module extmod: vendor="The XFree86 Project"
    compiled for 4.1.0, module version = 1.0.0
    Module class: XFree86 Server Extension
    ABI class: XFree86 Server Extension, version 0.1
(II) Loading extension SHAPE
(II) Loading extension MIT-SUNDRY-NONSTANDARD
(II) Loading extension BIG-REQUESTS
(II) Loading extension SYNC
(II) Loading extension MIT-SCREEN-SAVER
(II) Loading extension XC-MISC
(II) Loading extension XFree86-VidModeExtension
(II) Loading extension XFree86-Misc
(II) Loading extension DPMS
(II) Loading extension FontCache
(II) Loading extension TOG-CUP
(II) Loading extension Extended-Visual-Information
(II) Loading extension XVideo
(II) Loading extension XVideo-MotionCompensation
(II) LoadModule: "type1"
(II) Loading /usr/X11R6/lib/modules/fonts/libtype1.a
(II) Module type1: vendor="The XFree86 Project"
    compiled for 4.1.0, module version = 1.0.0
    Module class: XFree86 Font Renderer
    ABI class: XFree86 Font Renderer, version 0.2
(II) Loading font Type1
(II) Loading font CID
(II) LoadModule: "freetype"
(II) Loading /usr/X11R6/lib/modules/fonts/libfreetype.a
(II) Module freetype: vendor="The XFree86 Project"
    compiled for 4.1.0, module version = 1.1.9
    Module class: XFree86 Font Renderer
    ABI class: XFree86 Font Renderer, version 0.2
(II) Loading font FreeType
(II) LoadModule: "fbdev"
(II) Loading /usr/X11R6/lib/modules/drivers/fbdev_drv.o
(II) Module fbdev: vendor="The XFree86 Project"
    compiled for 4.1.0, module version = 0.1.0
    ABI class: XFree86 Video Driver, version 0.4
(II) LoadModule: "mouse"
(II) Loading /usr/X11R6/lib/modules/input/mouse_drv.o
(II) Module mouse: vendor="The XFree86 Project"
    compiled for 4.1.0, module version = 1.0.0
    Module class: XFree86 XInput Driver
    ABI class: XFree86 XInput driver, version 0.2
(II) FBDev: driver for framebuffer: fbdev, afb
(II) Primary Device is: PCI 01:00:0
(II) Loading sub module "fbdevhw"
(II) LoadModule: "fbdevhw"
(II) Loading /usr/X11R6/lib/modules/linux/libfbdevhw.a
(II) Module fbdevhw: vendor="The XFree86 Project"
    compiled for 4.1.0, module version = 0.0.2
    ABI class: XFree86 Video Driver, version 0.4
(II) FBDev(0): using default device
(II) Running in FRAMEBUFFER Mode
(**) FBDev(0): Depth 8, (--) framebuffer bpp 8
(==) FBDev(0): Default visual is PseudoColor
(==) FBDev(0): Using gamma correction (1.0, 1.0, 1.0)
(II) FBDev(0): Hardware: VESA VGA (vidmem: 8192k)
(II) FBDev(0): Checking Modes against framebuffer device...
(II) FBDev(0):   mode "640x480" test failed
(II) FBDev(0):   mode "800x600" test failed
(II) FBDev(0):   mode "1024x768" test failed
(II) FBDev(0):   mode "1280x1024" test failed
(II) FBDev(0): Checking Modes against monitor...
(--) FBDev(0): Virtual size is 1024x768 (pitch 1024)
(**) FBDev(0): Built-in mode "current": 78.7 MHz, 59.9 kHz, 75.7 Hz
(II) FBDev(0): Modeline "current"   78.65  1024 1056 1184 1312  768 772 776 792 -hsync -vsync -csync
(==) FBDev(0): DPI set to (75, 75)
(II) Loading sub module "fb"
(II) LoadModule: "fb"
(II) Loading /usr/X11R6/lib/modules/libfb.a
(II) Module fb: vendor="The XFree86 Project"
    compiled for 4.1.0, module version = 1.0.0
    ABI class: XFree86 ANSI C Emulation, version 0.1
(**) FBDev(0): Using "Shadow Framebuffer"
(II) Loading sub module "shadow"
(II) LoadModule: "shadow"
(II) Loading /usr/X11R6/lib/modules/libshadow.a
(II) Module shadow: vendor="The XFree86 Project"
    compiled for 4.1.0, module version = 1.0.0
    ABI class: XFree86 ANSI C Emulation, version 0.1

Fatal server error:
AddScreen/ScreenInit failed for driver 0


When reporting a problem related to a server crash, please send
the full server output, not just the last messages.
This can be found in the log file "/var/log/XFree86.0.log".
Please report problems to [e-mail].

Ik hoop dat jullie hier iets mee kunnen
Ik wil echt zo graag mogelijk linux goed kunnen draaien

[Sihaya]

Op welke resolutie staat je framebuffer dan. Geef anders ook /etc/lilo.conf

[Verwijderd]

Lilo.conf:

code:

# LILO configuration file
# generated by 'liloconfig'
#
# Start LILO global section
boot = /dev/hda
#compact      # faster, but won't work on all systems.
prompt
# VESA framebuffer console @ 1024x768x64k
# vga = 791
# Normal VGA console
 vga = normal
# VESA framebuffer console @ 1024x768x64k
# vga=791
# VESA framebuffer console @ 1024x768x32k
# vga=790
# VESA framebuffer console @ 1024x768x256
# vga=773
# VESA framebuffer console @ 800x600x64k
# vga=788
# VESA framebuffer console @ 800x600x32k
# vga=787
# VESA framebuffer console @ 800x600x256
# vga=771
# VESA framebuffer console @ 640x480x64k
# vga=785
# VESA framebuffer console @ 640x480x32k
# vga=784
# VESA framebuffer console @ 640x480x256
# vga=769
# ramdisk = 0     # paranoia setting
# End LILO global section
# Linux bootable partition config begins
image = /vmlinuz
  root = /dev/hda6
  label = Linux
  read-only # Non-UMSDOS filesystems should be mounted read-only for checking
# Linux bootable partition config ends
# DOS bootable partition config begins
other = /dev/hda1
  label = Win2k
  table = /dev/hda
# DOS bootable partition config ends

Hier is mijn lilo.conf

[Sihaya]

Op woensdag 26 december 2001 16:03 schreef edwinv de oplossing
- vga = 791 in je lilo.conf zetten (en lilo runnen, maar dat moest je toch al vanwege de nieuwe kernel)

Iets beter lezen

[Verwijderd]

zo stond het ook eerst in de config. Maar ook al stond hij daarop hij werkt nog steeds niet

[Verwijderd]

Op woensdag 26 december 2001 19:41 schreef Liquidus het volgende:
zo stond het ook eerst in de config. Maar ook al stond hij daarop hij werkt nog steeds niet

Heb je die regel in lilo.conf gezet, lilo gerunned, en gereboot?

[Sihaya]

Wat krijg je als je

code:

fbset

intikt

[Verwijderd]

Op woensdag 26 december 2001 19:54 schreef Sihaya het volgende:
Wat krijg je als je

code:

fbset

intikt

Ik kan dit commando nergens vinden. Moet ik dit programma nog eerst installeren ofzo ???

[deadinspace]

Is het misschien geen idee om de VESA driver te proberen?
Dus om het regeltje 'Driver "fbdev"' te veranderen in 'Driver "vesa"'.

[Sihaya]

Op donderdag 27 december 2001 00:07 schreef deadinspace het volgende:
Is het misschien geen idee om de VESA driver te proberen?
Dus om het regeltje 'Driver "fbdev"' te veranderen in 'Driver "vesa"'.

Die vesa driver werkt dus niet met de kyro. Nouja op 640x480x8. Maar probeer, misschien lukt het...

[Verwijderd]

Op donderdag 27 december 2001 00:58 schreef Sihaya het volgende:

[..]

Die vesa driver werkt dus niet met de kyro. Nouja op 640x480x8. Maar probeer, misschien lukt het...

Deze werkt dus wel gewoon, maar nu moet ik de hele tijd gaan scrollen om naar de andere kant van de desktop te gaan. Hoe kan ik veranderen dat die grootte dan ook echt 640x480 wordt ipv 1024x768 waarbij scrolling nodig is

[Sihaya]

Door de andere modelines weg te halen. Maar probeer eerst eens op 800x600.
En zet je DefaultDepth 8 op 16.

Als dit werkt dan heb ik het de hele tijd verkeerd gehad...

[Verwijderd]

Op donderdag 27 december 2001 11:58 schreef Sihaya het volgende:
Door de andere modelines weg te halen. Maar probeer eerst eens op 800x600.
En zet je DefaultDepth 8 op 16.

Als dit werkt dan heb ik het de hele tijd verkeerd gehad...

Ik kan het nu maximaal op 1024x768x16 krijgen
En het venster is nu ook goed ingesteld zodat ik niet meer hoef te scrollen

Tnx