Freesco 0.2.7 belt helemaal niet in! wat nu?

[Tiberium]

Mijn net geinstalleerde Freesco router wil helemaal niet inbellen. Ik heb een account bij casema, dus ik heb em geinstalleerd als zijnde een dial-up server, het nummer dat gedraaid zou moeten worden: T4. Als ik inlog op de router via de http console, en ik probeer de verbinding UP te krijgen lukt dat niet. Als ik klik op UP staat er dat het sein UP gegeven is, maar als ik dan even later bij STATUS kijk, is ie nog steeds DOWN. Als ik onderaan op Casema klik, staat er iets van "Switching to isp.casema in a few seconds" maar ook dat helpt niets. Deze soort modem werkt niet met autodetect (onder windhoos staat ie als standaard 33k3 modem, zelf instellen), dus ik heb em handmatig op poort cua0 gezet Ben ik iets vergeten in te stellen ofzo?

[MoBi]

username, password ingesteld? DNS servers? DHCP? Enz. Iets duidelijker formuleren wat je hebt gedaan tijdens de install om de verbiding met de casema in te stellen.

[Tiberium]

alles staat ingesteld volgens de handleiding, behalve dhcp, die staat uit. Ik heb alle pcs in mijn netwerk namelijk al een vast ip gegeven. Ook de ip van de router heb ik anders ingesteld: 192.168.1.10, omdat ik anders ook alle clients moet aanpassen. Username en pwd zijn goed ingesteld, dns ook.

[asusk7m550]

Misschien is een logje geen overbodige luxe

Als ik het goed heb (uit mijn vroege tijd met freesco) kun
je dat halen uit het console scherm.

[acq]

Op zaterdag 10 november 2001 21:57 schreef Tiberium het volgende:
Als ik onderaan op Casema klik, staat er iets van "Switching to isp.casema in a few seconds" maar ook dat helpt niets. Deze soort modem werkt niet met autodetect (onder windhoos staat ie als standaard 33k3 modem, zelf instellen)

Is het zo'n Deltakabel geval? Want dan kost het inderdaad vaak een hoop moeite om ze aan de praat te krijgen. Probeer in dat geval als resetstring ATZ0 (die laatste is een nul), te geven. Voor Linux bestaan er speciale scripts voor dat modem, voor Freesco ben ik ze nog niet tegen gekomen.

[MoBi]

wat voor wachtwoord controle methode heb je ingesteld met freesco? Dit kan wel eens verkeerd staan namelijk.

[Tiberium]

Euh... ik gebruik PAP. En Deltakabel? Wat is dat? De enige vorm van kabelinternet hier in de bollenstreek is via de Casema, en die schijnt idd af te wijken van chello e.d. Bedankt voor de tips, ik ga t zo ff allemaal proberen, ik zal ook even een log hierin zetten. Ik hoop dat jullie me kunnen helpen, want ik ben dus echt een Linux (freesco duz ook) newbie. Windows & Winroute Pro diehard..... maar wie is dat niet

[Tiberium]

Op zondag 11 november 2001 11:57 schreef acq het volgende:

[..]

Is het zo'n Deltakabel geval? Want dan kost het inderdaad vaak een hoop moeite om ze aan de praat te krijgen. Probeer in dat geval als resetstring ATZ0 (die laatste is een nul), te geven. Voor Linux bestaan er speciale scripts voor dat modem, voor Freesco ben ik ze nog niet tegen gekomen.

Die string haalt niets uit

[Tiberium]

Mijn log luidt als volgt:
Even voor de goeie orde, er zit wel een HDD in, maar ik draai van flop en dat wil ik graag zo houden. Onderin de log zie ik wat i/o errors.... daar zal t wel aan liggen zeker? Wat doe ik daaraan?


Nov 11 13:06:59 - syslogd 1.3-3: restart (remote reception).
Nov 11 13:07:00 - kernel: Kernel logging (proc) started.
Nov 11 13:07:00 - kernel: Memory: sized by int13 088h
Nov 11 13:07:00 - kernel: Console: 16 point font, 480 scans
Nov 11 13:07:00 - kernel: Console: colour VGA+ 80x30, 1 virtual console (max 63)
Nov 11 13:07:00 - kernel: pcibios_init : BIOS32 Service Directory structure at 0x000fbe30
Nov 11 13:07:00 - kernel: pcibios_init : BIOS32 Service Directory entry at 0xfc270
Nov 11 13:07:00 - kernel: pcibios_init : PCI BIOS revision 2.00 entry at 0xfc2a0
Nov 11 13:07:00 - kernel: Probing PCI hardware.
Nov 11 13:07:00 - kernel: Calibrating delay loop.. ok - 33.18 BogoMIPS
Nov 11 13:07:00 - kernel: Memory: 30248k/32768k available (696k kernel code, 384k reserved, 752k data)
Nov 11 13:07:00 - kernel: This processor honours the WP bit even when in supervisor mode. Good.
Nov 11 13:07:00 - kernel: Swansea University Computer Society NET3.035 for Linux 2.0
Nov 11 13:07:00 - kernel: NET3: Unix domain sockets 0.13 for Linux NET3.035.
Nov 11 13:07:00 - kernel: Swansea University Computer Society TCP/IP for NET3.034
Nov 11 13:07:00 - kernel: IP Protocols: IGMP, ICMP, UDP, TCP
Nov 11 13:07:00 - kernel: Linux IP multicast router 0.07.
Nov 11 13:07:00 - kernel: Checking 'hlt' instruction... disabled
Nov 11 13:07:00 - kernel: Linux version 2.0.38 ([e-mail]) (gcc version 2.7.2.3) #4 Wed May 17 22:55:01 EDT 2000
Nov 11 13:07:00 - kernel: Starting kswapd v 1.4.2.2
Nov 11 13:07:00 - kernel: Serial driver version 4.13p1 with no serial options enabled
Nov 11 13:07:00 - kernel: ttyS00 at 0x03f8 (irq = 4) is a 16550A
Nov 11 13:07:00 - kernel: lp: Driver configured but no interfaces found.
Nov 11 13:07:00 - kernel: Real Time Clock Driver v1.09
Nov 11 13:07:00 - kernel: Ramdisk driver initialized : 16 ramdisks of 4096K size
Nov 11 13:07:00 - kernel: loop: registered device at major 7
Nov 11 13:07:00 - kernel: hda: Conner Peripherals 510MB - CP30541, 486MB w/256kB Cache, CHS=989/16/63
Nov 11 13:07:00 - kernel: ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
Nov 11 13:07:00 - kernel: Floppy drive(s): fd0 is 1.44M
Nov 11 13:07:00 - kernel: FDC 0 is a post-1991 82077
Nov 11 13:07:00 - kernel: Ethernet Bridge 002 for NET3.035 (Linux 2.0)
Nov 11 13:07:00 - kernel: PPP: version 2.3.10 (demand dialling)
Nov 11 13:07:00 - kernel: TCP compression code copyright 1989 Regents of the University of California
Nov 11 13:07:00 - kernel: PPP line discipline registered.
Nov 11 13:07:00 - kernel: SLIP: version 0.8.4-NET3.019-NEWTTY (dynamic channels, max=256).
Nov 11 13:07:00 - kernel: CSLIP: code copyright 1989 Regents of the University of California.
Nov 11 13:07:00 - kernel: Partition check:
Nov 11 13:07:00 - kernel: hda: hda1
Nov 11 13:07:00 - kernel: RAMDISK: Compressed image found at block 0
Nov 11 13:07:00 - kernel: EXT2-fs warning: checktime reached, running e2fsck is recommended
Nov 11 13:07:00 - kernel: VFS: Mounted root (ext2 filesystem).
Nov 11 13:07:00 - kernel: VFS: Disk change detected on device 02:00
Nov 11 13:07:01 - kernel: UMSDOS Beta 0.6 (compatibility level 0.4, fast msdos)
Nov 11 13:07:15 - syslogd 1.3-3: restart (remote reception).
Nov 11 13:07:20 - kernel: ip_masq_icq: using TCP port range 60200-61000
Nov 11 13:07:20 - kernel: ip_masq_icq: loaded support on port 4000/UDP
Nov 11 13:07:20 - insmod: Cannot open /mnt/router/drv/*.o
Nov 11 13:07:20 - insmod: Cannot open /mnt/router/drv/*.o
Nov 11 13:07:20 - insmod: Symbol 'io' not found
Nov 11 13:07:20 - last message repeated 7 times
Nov 11 13:07:20 - kernel: smc-ultra.c: No SMC Ultra card found (i/o = 0x300).
Nov 11 13:07:20 - insmod: Initialization of /tmp/net/smc-ultra.o.A0 failed
Nov 11 13:07:20 - kernel: smc-ultra.c: No SMC Ultra card found (i/o = 0x300).
Nov 11 13:07:20 - insmod: Initialization of /tmp/net/smc-ultra.o.B0 failed
Nov 11 13:07:20 - insmod: Symbol 'io' not found
Nov 11 13:07:21 - insmod: Symbol 'io' not found
Nov 11 13:07:21 - kernel: ne.c: No NE*000 card found at i/o = 0x300
Nov 11 13:07:21 - insmod: Initialization of /tmp/prm/ne.o.A0 failed
Nov 11 13:07:21 - kernel: ne.c: No NE*000 card found at i/o = 0x300
Nov 11 13:07:21 - insmod: Initialization of /tmp/prm/ne.o.B0 failed
Nov 11 13:07:21 - insmod: Cannot open /mnt/router/drv/*.o
Nov 11 13:07:21 - insmod: Cannot open /mnt/router/drv/*.o
Nov 11 13:07:21 - insmod: Symbol 'io' not found
Nov 11 13:07:21 - last message repeated 7 times
Nov 11 13:07:21 - kernel: smc-ultra.c: Presently autoprobing (not recommended) for a single card.
Nov 11 13:07:21 - kernel: smc-ultra.c: No SMC Ultra card found (i/o = 0x0).
Nov 11 13:07:21 - insmod: Initialization of /tmp/net/smc-ultra.o.A1 failed
Nov 11 13:07:21 - kernel: smc-ultra.c: Presently autoprobing (not recommended) for a single card.
Nov 11 13:07:21 - kernel: smc-ultra.c: No SMC Ultra card found (i/o = 0x0).
Nov 11 13:07:21 - insmod: Initialization of /tmp/net/smc-ultra.o.B1 failed
Nov 11 13:07:21 - insmod: Symbol 'io' not found
Nov 11 13:07:21 - insmod: Symbol 'io' not found
Nov 11 13:07:21 - kernel: ne.c: No PCI cards found. Use "io=0xNNN" value(s) for ISA cards.
Nov 11 13:07:21 - insmod: Initialization of /tmp/prm/ne.o.A1 failed
Nov 11 13:07:21 - kernel: ne.c: No PCI cards found. Use "io=0xNNN" value(s) for ISA cards.
Nov 11 13:07:21 - insmod: Initialization of /tmp/prm/ne.o.B1 failed
Nov 11 13:07:21 - insmod: Cannot open /mnt/router/drv/*.o
Nov 11 13:07:22 - insmod: Cannot open /mnt/router/drv/*.o
Nov 11 13:07:22 - insmod: Symbol 'io' not found
Nov 11 13:07:22 - last message repeated 7 times
Nov 11 13:07:22 - kernel: smc-ultra.c: Presently autoprobing (not recommended) for a single card.
Nov 11 13:07:22 - kernel: smc-ultra.c: No SMC Ultra card found (i/o = 0x0).
Nov 11 13:07:22 - insmod: Initialization of /tmp/net/smc-ultra.o.A2 failed
Nov 11 13:07:22 - kernel: smc-ultra.c: Presently autoprobing (not recommended) for a single card.
Nov 11 13:07:22 - kernel: smc-ultra.c: No SMC Ultra card found (i/o = 0x0).
Nov 11 13:07:22 - insmod: Initialization of /tmp/net/smc-ultra.o.B2 failed
Nov 11 13:07:22 - insmod: Symbol 'io' not found
Nov 11 13:07:22 - insmod: Symbol 'io' not found
Nov 11 13:07:22 - kernel: ne.c: No PCI cards found. Use "io=0xNNN" value(s) for ISA cards.
Nov 11 13:07:22 - insmod: Initialization of /tmp/prm/ne.o.A2 failed
Nov 11 13:07:22 - kernel: ne.c: No PCI cards found. Use "io=0xNNN" value(s) for ISA cards.
Nov 11 13:07:22 - insmod: Initialization of /tmp/prm/ne.o.B2 failed
Nov 11 13:07:22 - insmod: Cannot open /mnt/router/drv/*.o
Nov 11 13:07:22 - insmod: Initialization of /tmp/net/3c509.o.C failed
Nov 11 13:07:22 - kernel: 3c59x.c:v0.99H 11/17/98 Donald Becker http://cesdis.gsfc.nasa.gov/linux/drivers/vortex.html
Nov 11 13:07:22 - insmod: Initialization of /tmp/net/3c59x.o.C failed
Nov 11 13:07:22 - kernel: ne2k-pci.c:v0.99L 2/7/98 D. Becker/P. Gortmaker http://cesdis.gsfc.nasa.gov/linux/drivers/ne2k-pci.html
Nov 11 13:07:22 - insmod: Initialization of /tmp/net/ne2k-pci.o.C failed
Nov 11 13:07:22 - kernel: rtl8139.c:v1.04 9/22/98 Donald Becker http://cesdis.gsfc.nasa.gov/linux/drivers/rtl8139.html
Nov 11 13:07:22 - kernel: eth0: RealTek RTL8139 Fast Ethernet at 0xe800, IRQ 11, 00:10:a7:03:87:42.
Nov 11 13:07:23 - kernel: smc-ultra.c: Presently autoprobing (not recommended) for a single card.
Nov 11 13:07:23 - kernel: smc-ultra.c: No SMC Ultra card found (i/o = 0x0).
Nov 11 13:07:23 - insmod: Initialization of /tmp/net/smc-ultra.o.C failed
Nov 11 13:07:23 - insmod: Initialization of /tmp/net/tulip.o.C failed
Nov 11 13:07:23 - kernel: ne.c: No PCI cards found. Use "io=0xNNN" value(s) for ISA cards.
Nov 11 13:07:23 - insmod: Initialization of /tmp/prm/ne.o.C failed
Nov 11 13:07:24 - mode: User 'init' issued 'mode Casema'
Nov 11 13:07:26 - named[173]: starting. named 4.9.3-BETA26 Sun Nov 26 20:58:49 CST 1995 ^Iroot@fuzzy:/tmp/bind-4.9.3-BETA26/named
Nov 11 13:07:26 - named[173]: cache zone "" loaded (serial 0)
Nov 11 13:07:26 - named[173]: primary zone "inet" loaded (serial 1999317)
Nov 11 13:07:26 - named[173]: primary zone "10.in-addr.arpa" loaded (serial 1999317)
Nov 11 13:07:26 - named[173]: primary zone "16.172.in-addr.arpa" loaded (serial 1999317)
Nov 11 13:07:26 - named[173]: primary zone "168.192.in-addr.arpa" loaded (serial 1999317)
Nov 11 13:07:26 - named[173]: primary zone "0.0.127.in-addr.arpa" loaded (serial 1999317)
Nov 11 13:07:26 - named[174]: Ready to answer queries.
Nov 11 13:07:30 - lpd[291]: lpd by Steve Flynn, V1.3 by Simon Byrnand, May 2000 ([e-mail]): started.
Nov 11 13:07:30 - lpd[292]: Port: 515, Netmask: 1, RawQue: nt, FeedQue: lp, Output: /dev/lp1, Timeout: 300
Nov 11 13:07:30 localhost thttpd[295]: thttpd/2.05 09nov99 starting on port 82
Nov 11 13:07:30 localhost thttpd[295]: started as root without requesting chroot(), warning only
Nov 11 13:08:20 - control: User 'admin@192.168.1.1' issued 'control up'
Nov 11 13:08:20 - diald[284]: FIFO: Link up request received.
Nov 11 13:08:20 - diald[284]: failed to get initial modem terminal attributes: I/O error
Nov 11 13:08:20 - diald[284]: could not get initial terminal attributes: I/O error
Nov 11 13:08:20 - diald[284]: failed to set terminal attributes: I/O error
Nov 11 13:08:21 - diald[284]: could not get initial terminal attributes: I/O error
Nov 11 13:08:21 - diald[284]: failed to set terminal attributes: I/O error
Nov 11 13:08:21 - diald[284]: Running connect (pid = 364).
Nov 11 13:08:21 - chat[366]: Can't get terminal parameters: I/O error
Nov 11 13:08:21 - connect: Failed to initialize modem
Nov 11 13:08:21 - diald[284]: Connect script failed.
Nov 11 13:08:22 - diald[284]: Delaying 5 seconds before clear to dial.
Nov 11 13:08:59 - diald[284]: SIGTERM. Termination request received.
Nov 11 13:08:59 - diald[284]: Diald is dieing with code 0
Nov 11 13:09:04 - mode: User 'admin@192.168.1.1' issued 'mode Casema'
Nov 11 13:09:04 - named[549]: starting. named 4.9.3-BETA26 Sun Nov 26 20:58:49 CST 1995 ^Iroot@fuzzy:/tmp/bind-4.9.3-BETA26/named
Nov 11 13:09:04 - named[549]: cache zone "" loaded (serial 0)
Nov 11 13:09:04 - named[549]: primary zone "inet" loaded (serial 1999317)
Nov 11 13:09:04 - named[549]: primary zone "10.in-addr.arpa" loaded (serial 1999317)
Nov 11 13:09:04 - named[549]: primary zone "16.172.in-addr.arpa" loaded (serial 1999317)
Nov 11 13:09:04 - named[549]: primary zone "168.192.in-addr.arpa" loaded (serial 1999317)
Nov 11 13:09:04 - named[549]: primary zone "0.0.127.in-addr.arpa" loaded (serial 1999317)
Nov 11 13:09:05 - named[550]: Ready to answer queries.
Nov 11 13:09:07 - lpd[660]: lpd by Steve Flynn, V1.3 by Simon Byrnand, May 2000 ([e-mail]): started.
Nov 11 13:09:07 - lpd[662]: Port: 515, Netmask: 1, RawQue: nt, FeedQue: lp, Output: /dev/lp1, Timeout: 300
Nov 11 13:09:07 localhost thttpd[666]: thttpd/2.05 09nov99 starting on port 82
Nov 11 13:09:07 localhost thttpd[666]: started as root without requesting chroot(), warning only
Nov 11 13:09:42 - diald[661]: failed to get initial modem terminal attributes: I/O error
Nov 11 13:09:42 - diald[661]: could not get initial terminal attributes: I/O error
Nov 11 13:09:42 - diald[661]: failed to set terminal attributes: I/O error
Nov 11 13:09:43 - diald[661]: could not get initial terminal attributes: I/O error
Nov 11 13:09:43 - diald[661]: failed to set terminal attributes: I/O error
Nov 11 13:09:43 - diald[661]: Running connect (pid = 764).
Nov 11 13:09:43 - chat[766]: Can't get terminal parameters: I/O error
Nov 11 13:09:43 - connect: Failed to initialize modem
Nov 11 13:09:43 - diald[661]: Connect script failed.
Nov 11 13:09:44 - diald[661]: Delaying 5 seconds before clear to dial.
Nov 11 13:09:44 - diald[661]: SIGTERM. Termination request received.
Nov 11 13:09:44 - diald[661]: Diald is dieing with code 0
Nov 11 13:09:48 - mode: User 'admin@192.168.1.1' issued 'mode Casema'
Nov 11 13:09:49 - named[885]: starting. named 4.9.3-BETA26 Sun Nov 26 20:58:49 CST 1995 ^Iroot@fuzzy:/tmp/bind-4.9.3-BETA26/named
Nov 11 13:09:49 - named[885]: cache zone "" loaded (serial 0)
Nov 11 13:09:49 - named[885]: primary zone "inet" loaded (serial 1999317)
Nov 11 13:09:49 - named[885]: primary zone "10.in-addr.arpa" loaded (serial 1999317)
Nov 11 13:09:49 - named[885]: primary zone "16.172.in-addr.arpa" loaded (serial 1999317)
Nov 11 13:09:49 - named[885]: primary zone "168.192.in-addr.arpa" loaded (serial 1999317)
Nov 11 13:09:49 - named[885]: primary zone "0.0.127.in-addr.arpa" loaded (serial 1999317)
Nov 11 13:09:49 - named[886]: Ready to answer queries.
Nov 11 13:09:51 - lpd[996]: lpd by Steve Flynn, V1.3 by Simon Byrnand, May 2000 ([e-mail]): started.
Nov 11 13:09:51 - lpd[1000]: Port: 515, Netmask: 1, RawQue: nt, FeedQue: lp, Output: /dev/lp1, Timeout: 300
Nov 11 13:09:51 localhost thttpd[1006]: thttpd/2.05 09nov99 starting on port 82
Nov 11 13:09:51 localhost thttpd[1006]: started as root without requesting chroot(), warning only

[Tiberium]

Sorry voor alle commotie. Mijn compoort was naar de kl*te. Slotjuh. En bedankt voor de snelle reacties