Ik heb ff zitten zoeken, dan waar ook anders, op de site van pinnacle (blijft toch moeilijk soms he, om ff op de site van de fabrikant te kijken

) Maar goed, zo gaat dat hier wel vaker
Dit vond ik :
Ok this took me quite a few times before it worked ...I found a few things that finaly allowed the software and drivers to match up and actualy work the following is what I did:
1. Installed PCTV 4.0 software and drivers
2. let the pc reboot
3. Go to thw c:\windows\system32\drivers
4. find the files named:
pctvnt.sys
PCTVAud.sys
pctvw2k.sys
then right click and choose properties and uncheck read only, hidden, and archive attributes.
5. Run 4.01 update - do not reboot
6. Repeat step 47. Run 4.02 update
8. Repeat step 4
9. Run 4.02a update from Win 2K updated on webpage
10. when pc reboots and wizrd comes up choose exit
11. when pc says new hardware found and ask for driver disc ... browse to C:\windows\system32\drivers\ then click the pctvnt.sys file and click ok then continue.
12. when driver install asks for file UnInW2k.exe browse to c:\windows\system32\ and select the UnInW2k.exe then click ok/continue
13. when Windows XP is finished installing the drivers run the PCTV Assistant ... and hope the software work ...if it passes the test everything will work ...however you will see a pink shadow under the mouse and menus when they overlap the TV picture....
At first I had a problem with the program finding the channels but after telling it to autosearch a second time through the settings menu it finaly picked them up
Hopes this helps the XP users .....:-)
ZIE OOK :
http://www.pinnaclesys.de/support/relai.asp?lang=2&product_id=618&type_id=4&page=board
En dan customer board en dan pctv kiezen..
Good luck.