How to Flash a New BIOS
You can install updated BIOS for this mainboard that you can download from the manufacturer's web site. New BIOS may provide support for new peripherals, improvements in performance or fixes for known bugs. Install new BIOS as follows:
Some mainboards have a Flash BIOS jumper that protects the current BIOS from being changed or overwritten.
If your mainboard has this jumper, change the setting to allow BIOS flashing.
Some Setup Utilities have an item called Firmware Write Protect that prevents the BIOS from being overwritten.
If your BIOS has this item (check the Advanced BIOS Features Setup page) disable it for the present.
Your computer must be running in a real-mode DOS environment, not the DOS window of Windows NT or Windows
95/98.
We recommend that you create a new formatted DOS system floppy diskette.
Download the Flash Utility and new BIOS file from the
www.ecs.com.tw Web site.
Copy these files to a system diskette.
Turn off your computer and insert the system diskette in your computer's diskette drive.
You might need to run the Setup Utility and change the boot priority items on the Advanced BIOS Features Setup
page, to force your computer to boot from the floppy diskette drive first.
At the A:\ prompt, after your computer has booted to DOS from the diskette, run the Flash Utility and press <Enter>.
You see a screen similar to the following.
In the "File Name to Program" dialog box, type in the filename of the new BIOS and follow the onscreen directions to
flash the new BIOS to the mainboard.
When the installation is complete, remove the floppy diskette from the diskette drive and restart your computer.
If your mainboard has a Flash BIOS jumper, reset the jumper to protect the newly installed BIOS from being
overwritten.
Direct van de ECS site, moeilijk joh zoeken...
:strip_icc():strip_exif()/u/3612/tux.jpg?f=community)
:strip_exif()/u/4143/crop673c629560e43_cropped.gif?f=community)