Hoi,
Heb iets gevonden miscchien voor jou van toepassing
---------------------------------------------------------------------
Hack Instructions
To make your player Multi Region follow the hack instructions below. - Good Look !!!
Turn off the machine and unplug it from the mains (AC outlet)
Using the buttons on the Player and NOT the remote control, Press and Hold Play & Open/Close
While holding these buttons plug the AC cord back in the mains outlet, you should now see on the units display TEST and CPU ver#
Release the Play & Open/Close buttons
Press DVD Menu twice on the remote
When the display reads 000 5858 use the up and down buttons to change the 000 to 02E
Using the Left and Right arrow buttons change the last four digits until they read 0000 for Region Free, 0101 for Region 1, 0202 for Region 2 or 0404 for Region 4 etc.
Press Enter on the player
Press Standby and wait 5 Seconds
Press Standby again
Your player should now be region free and auto selecting, if some titles do not play then they could be hard coded and you will need to follow the above procedure again selecting the appropriate code for that particular region ie 0101 for Region 1
http://www.dvd-technology.co.uk/dvdnews.htm
