lo
mijn debian systeem herkent mijn extra controllerkaartje ...
maar ik krijg mijn /dev/hde met geen mogelijkheid gemount ...
ff een /var/log/dmesg
Uniform Multi-Platform E-IDE driver Revision: 6.31
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
PIIX4: IDE controller on PCI bus 00 dev 39
PIIX4: chipset revision 1
PIIX4: not 100% native mode: will probe irqs later
ide0: BM-DMA at 0xf000-0xf007, BIOS settings: hda:DMA, hdb:DMA
ide1: BM-DMA at 0xf008-0xf00f, BIOS settings: hdc:DMA, hdd:DMA
HPT370: IDE controller on PCI bus 00 dev 48
PCI: Enabling device 00:09.0 (0005 -> 0007)
HPT370: chipset revision 3
HPT370: not 100% native mode: will probe irqs later
ide2: BM-DMA at 0xc400-0xc407, BIOS settings: hde:DMA, hdf:pio
ide3: BM-DMA at 0xc408-0xc40f, BIOS settings: hdg:pio, hdh:pio
HPT370: onboard version of chipset, pin1=1 pin2=2
HPT370: IDE controller on PCI bus 00 dev 98
PCI: Enabling device 00:13.0 (0005 -> 0007)
HPT370: chipset revision 1
HPT370: not 100% native mode: will probe irqs later
ide4: BM-DMA at 0xd400-0xd407, BIOS settings: hdi:pio, hdj:pio
HPT370: IDE controller on PCI bus 00 dev 99
HPT370: chipset revision 1
HPT370: not 100% native mode: will probe irqs later
ide5: BM-DMA at 0xe000-0xe007, BIOS settings: hdk:pio, hdl:pio
hda: Maxtor 91080D5, ATA DISK drive
hdb: MAXTOR 4K060H3, ATA DISK drive
hdc: FX600S, ATAPI CD/DVD-ROM drive
hdd: Maxtor 96147H6, ATA DISK drive
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
ide1 at 0x170-0x177,0x376 on irq 15
hda: 21095424 sectors (10801 MB) w/512KiB Cache, CHS=1313/255/63, UDMA(33)
hdb: 117266688 sectors (60041 MB) w/2000KiB Cache, CHS=7299/255/63, UDMA(33)
hdd: 120064896 sectors (61473 MB) w/2048KiB Cache, CHS=119112/16/63, UDMA(33)
hdc: ATAPI 6X CD-ROM drive, 256kB Cache, DMA
Uniform CD-ROM driver Revision: 3.12
Partition check:
hda: [EZD] [remap 0->1] [1313/255/63] hda1 hda2
hdb: hdb1
hdd: [PTBL] [7473/255/63] hdd1
wordt netjes herkent kan alleen mijn /dev/hde1 niet mounten herket de disk niet ...
iemand bekent met dit probleem ?
/etc/fstab ...
/dev/hde1 /fub ext2 defaults,errors=remount-ro 0 1
mijn debian systeem herkent mijn extra controllerkaartje ...
maar ik krijg mijn /dev/hde met geen mogelijkheid gemount ...
ff een /var/log/dmesg
Uniform Multi-Platform E-IDE driver Revision: 6.31
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
PIIX4: IDE controller on PCI bus 00 dev 39
PIIX4: chipset revision 1
PIIX4: not 100% native mode: will probe irqs later
ide0: BM-DMA at 0xf000-0xf007, BIOS settings: hda:DMA, hdb:DMA
ide1: BM-DMA at 0xf008-0xf00f, BIOS settings: hdc:DMA, hdd:DMA
HPT370: IDE controller on PCI bus 00 dev 48
PCI: Enabling device 00:09.0 (0005 -> 0007)
HPT370: chipset revision 3
HPT370: not 100% native mode: will probe irqs later
ide2: BM-DMA at 0xc400-0xc407, BIOS settings: hde:DMA, hdf:pio
ide3: BM-DMA at 0xc408-0xc40f, BIOS settings: hdg:pio, hdh:pio
HPT370: onboard version of chipset, pin1=1 pin2=2
HPT370: IDE controller on PCI bus 00 dev 98
PCI: Enabling device 00:13.0 (0005 -> 0007)
HPT370: chipset revision 1
HPT370: not 100% native mode: will probe irqs later
ide4: BM-DMA at 0xd400-0xd407, BIOS settings: hdi:pio, hdj:pio
HPT370: IDE controller on PCI bus 00 dev 99
HPT370: chipset revision 1
HPT370: not 100% native mode: will probe irqs later
ide5: BM-DMA at 0xe000-0xe007, BIOS settings: hdk:pio, hdl:pio
hda: Maxtor 91080D5, ATA DISK drive
hdb: MAXTOR 4K060H3, ATA DISK drive
hdc: FX600S, ATAPI CD/DVD-ROM drive
hdd: Maxtor 96147H6, ATA DISK drive
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
ide1 at 0x170-0x177,0x376 on irq 15
hda: 21095424 sectors (10801 MB) w/512KiB Cache, CHS=1313/255/63, UDMA(33)
hdb: 117266688 sectors (60041 MB) w/2000KiB Cache, CHS=7299/255/63, UDMA(33)
hdd: 120064896 sectors (61473 MB) w/2048KiB Cache, CHS=119112/16/63, UDMA(33)
hdc: ATAPI 6X CD-ROM drive, 256kB Cache, DMA
Uniform CD-ROM driver Revision: 3.12
Partition check:
hda: [EZD] [remap 0->1] [1313/255/63] hda1 hda2
hdb: hdb1
hdd: [PTBL] [7473/255/63] hdd1
wordt netjes herkent kan alleen mijn /dev/hde1 niet mounten herket de disk niet ...
iemand bekent met dit probleem ?
/etc/fstab ...
/dev/hde1 /fub ext2 defaults,errors=remount-ro 0 1