New PC built, ASUS TUF GAMING Z790-Plus WIFI, intel i9 14900K, corsair vengeance 32gb 6400 cas32, Corsair MP700 Pro XT 2TB.
UserBenchmark is reporting the CPU's boost is very low. Havent seen it boost up over 5.4ghz. Temperatures are around 40C. Intel Diagnostic Tool workload 100% pushes it up to 80C. Rather normal they say. The tool didnt report any errors.
The SSD is PCIE 5.0 running on 4.0. Should be fully compatible, just running on lower speed. Performs well, according to benchmark. But every now and then system restarts with the blue screen reporting WHEA_UNCORRECTABLE_ERROR.
The DRAM seems fine: Windows Memory Diagnostic didnt detect any errors. Its performing ok, tho the latency was a little higher than normal.
PSU is new, rather low (750W) but should be fine to power 14900K with my old GTX1070.
Bios was updated right after installation. Cant find any drivers for the MP700 Pro XT.
I have no idea what to look for else.
Yesterday when i got the error, something odd happened: for the first time, CPU was having 100% workloads, but there was no process to be found. I found a topic about power management. Somehow my setting was changed to 'balanced'. All i did was set it back on 'performance' and cpu loads were normal again.
UserBenchmark is reporting the CPU's boost is very low. Havent seen it boost up over 5.4ghz. Temperatures are around 40C. Intel Diagnostic Tool workload 100% pushes it up to 80C. Rather normal they say. The tool didnt report any errors.
The SSD is PCIE 5.0 running on 4.0. Should be fully compatible, just running on lower speed. Performs well, according to benchmark. But every now and then system restarts with the blue screen reporting WHEA_UNCORRECTABLE_ERROR.
The DRAM seems fine: Windows Memory Diagnostic didnt detect any errors. Its performing ok, tho the latency was a little higher than normal.
PSU is new, rather low (750W) but should be fine to power 14900K with my old GTX1070.
Bios was updated right after installation. Cant find any drivers for the MP700 Pro XT.
I have no idea what to look for else.
Yesterday when i got the error, something odd happened: for the first time, CPU was having 100% workloads, but there was no process to be found. I found a topic about power management. Somehow my setting was changed to 'balanced'. All i did was set it back on 'performance' and cpu loads were normal again.
[ Voor 13% gewijzigd door QuentinBlemkin op 02-02-2026 17:03 ]