Bij deze de update instructies
Android TV Update (Flash Drive)
What you’ll need for prep:
1) A USB with the EXTRACTED F/W BIN file update copied to the root directory (FAT32
formatted, no other file should be on root directory)
2) TV Remote Controller working (batteries)
3) Find the manual power and navigation button on the lower back of the TV.
a. Lower left side when facing the TV
b. Lower right side when facing the back of the TV
4) TV positioned so the Remote Controller can operate the TV
5) TV positioned so the manual button can be pressed and held for 10 seconds or so
F/W Update Steps:
1) Plug the TV to a power outlet.
2) Connect the USB with the F/W update
3) POWER ON using the TV Remote Controller (aim at lower middle of the TV)
4) TV will start up, Skyworth & Android seen during this 3—45 second process.
5) Once fully ON, the OSD should confirm a USB Media is attached
6) Carefully POWER OFF the TV by holding the Remote Controller Power Button for 3-5
seconds until the OSD prompts you to confirm Power OFF.
7) Touch OK on the Remote Controller, TV shuts OFF

Wait 10 seconds
9) Reach behind the lower left corner of the TV, find the manual control button
10) Carefully press and hold the manual power button dead center for 10 to 15 seconds
11) The “reboot” mode is confirmed when the OSD “update” and “%” displays on screen
12) Update should take up to 2-5 minutes.
If the update steps fail to start F/W update, try again. Follow steps carefully.