Action LSC Smart Connect draaibare camera

[Jan121]

Iemand een idee wat de internals hier van zijn?
Zou deze camera te flashen zijn met Tasmota?

https://www.action.com/nl...connect-draaibare-camera/

20 euro is niet veel, maar voor mij alleen interessant als de Chinese software eraf kan en open source erop.

[JurnD]

Geen Esp aan boord. Wel een ak3918en080 en een SV6155P wifi module. Zal wel een linux bordje zijn met ongetwijfeld niet heel standaard protocollen. Zal later de debug serial port eens uitlezen, maar denk niet dat er veel mee te beginnen is deze camera.

[JurnD]

code:

U-Boot 2013.10.0-AK_V3.0.08 (Jun 02 2021 - 17:48:34)

DRAM:  64 MiB
write 0 to pin 79 on address 0x20170014 down
write 0 to pin 34 on address 0x20170010 down
write 0 to pin 80 on address 0x20170014 down
write 0 to pin 81 on address 0x20170014 down
8 MiB
Create flash partition table init OK!
ANYKA SDHC/MMC4.0: 0
Load Env CRC OK!
In:    serial
Out:   serial
Err:   serial
Net:   AKEthernet-0
                   
Hit any key to stop autoboot:  1                                                                                                                                     0 
                                                                                                                                                                      
SF: 1422616 bytes @ 0x38000 Read: OK
## Booting kernel from Legacy Image at 81808000 ...
   Image Name:   Linux-3.4.35
   Image Type:   ARM Linux Kernel Image (uncompressed)
   Data Size:    1422552 Bytes = 1.4 MiB
   Load Address: 81808000
   Entry Point:  81808040
   Verifying Checksum ... OK
   XIP Kernel Image ... OK

Starting kernel ...

Uncompressing Linux... done, booting the kernel.
Anyka Linux Kernel Version: 1.1.13
Booting Linux on physical CPU 0
Linux version 3.4.35 (hutong@ubuntu) (gcc version 4.8.5 (anyka (gcc-4.8.5 + binutils-2.24 + ulcibc-0.9.33.2)(20170223)) ) #6 Fri Apr 23 11:08:50 CST 2021
CPU: ARM926EJ-S [41069265] revision 5 (ARMv5TEJ), cr=00053177
CPU: VIVT data cache, VIVT instruction cache
Machine: AK3918EV300_JW_F37_V10
Memory policy: ECC disabled, Data cache writeback
ANYKA CPU AK3918 (ID 0x20160100)
Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 10160
Kernel command line: console=ttySAK0,115200n8 root=/dev/mtdblock4 rootfstype=squashfs init=/sbin/init mem=64M memsize=64M
PID hash table entries: 256 (order: -2, 1024 bytes)
Dentry cache hash table entries: 8192 (order: 3, 32768 bytes)
Inode-cache hash table entries: 4096 (order: 2, 16384 bytes)
Memory: 40MB = 40MB total
Memory: 36352k/36352k available, 4608k reserved, 0K highmem
Virtual kernel memory layout:
    vector  : 0xffff0000 - 0xffff1000   (   4 kB)
    fixmap  : 0xfff00000 - 0xfffe0000   ( 896 kB)
    vmalloc : 0xc3000000 - 0xff000000   ( 960 MB)
    lowmem  : 0xc0000000 - 0xc2800000   (  40 MB)
    modules : 0xbf000000 - 0xc0000000   (  16 MB)
      .text : 0xc0008000 - 0xc03a9000   (3716 kB)
      .init : 0xc03a9000 - 0xc03c3000   ( 104 kB)
      .data : 0xc03c4000 - 0xc03e9ed8   ( 152 kB)
       .bss : 0xc03e9efc - 0xc040aa48   ( 131 kB)
SLUB: Genslabs=13, HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
NR_IRQS:117
sched_clock: 32 bits at 12MHz, resolution 83ns, wraps every 357913ms
AK39 console driver initial
console [ttySAK0] enabled
Calibrating delay loop... 199.06 BogoMIPS (lpj=995328)
pid_max: default: 32768 minimum: 301
Mount-cache hash table entries: 512
CPU: Testing write buffer coherency: ok
Setting up static identity map for 0x81adc338 - 0x81adc390
devtmpfs: initialized
NET: Registered protocol family 16
On-chip L2 memory initialized
AK39 clocks: CPU 400MHz, MEM 400MHz, ASIC 120MHz
Anyka platform share gpio locks initialize.
bio: create slab <bio-0> at 0
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
i2c-ak39 i2c-ak39: Unable to achieve desired frequency 300KHz. Lowest achievable 312KHz
i2c-ak39 i2c-ak39: i2c-0: AK39 I2C adapter
Linux video capture interface: v2.00
cfg80211: Calling CRDA to update world regulatory domain
Switching to clocksource ak_timer5 cs
NET: Registered protocol family 2
IP route cache hash table entries: 1024 (order: 0, 4096 bytes)
TCP established hash table entries: 2048 (order: 2, 16384 bytes)
TCP bind hash table entries: 2048 (order: 1, 8192 bytes)
TCP: Hash tables configured (established 2048 bind 2048)
TCP: reno registered
UDP hash table entries: 256 (order: 0, 4096 bytes)
UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)
NET: Registered protocol family 1
RPC: Registered named UNIX socket transport module.
RPC: Registered udp transport module.
RPC: Registered tcp transport module.
RPC: Registered tcp NFSv4.1 backchannel transport module.
squashfs: version 4.0 (2009/01/31) Phillip Lougher
exFAT: Version 1.2.9
jffs2: version 2.2. © 2001-2006 Red Hat, Inc.
msgmni has been set to 71
io scheduler noop registered
io scheduler cfq registered (default)
AK39xx uart driver init, (c) 2013 ANYKA
ak39-uart.0: ttySAK0 at MMIO 0x20130000 (irq = 10) is a AK39
ion: failed to create debug files.
brd: module loaded
loop: module loaded
@@@ [akpcm_init]: enter @@@
@@@ [akpcm_probe]: enter @@@
akpcmL0->ak39_codec_probe enter...
akpcm probe: mic on
akpcm_probe: OK

akisp_init
ak_pwm_probe
Start to init Anyka SPI Flash...
Start to init Anyka partition table...
AK SPI Driver, (c) 2012 ANYKA
akpi regs: SPICON:00000152, SPISTA:00000015, SPIINT:00000000.
ak-spi ak-spi: master is unqueued, this is deprecated
ak_spi setup the master.
pre-scaler=2 (wanted 20Mhz, got 20Mhz)
ak spiflash probe enter.
pre-scaler=2 (wanted 20Mhz, got 20Mhz)
ak_spi_setupxfer,con:00000252.
akspi flash ID: 0x00207017
ak-spiflash spi0.0: xm25qh64a (8192 Kbytes)
FHA:partition lib version: V1.1.06
FHA:spiflash init
FHA:boot block num offset:427
FHA:Sflash_Get_Partition_Startpage g_boot_len:864
mtd_part[0]:
name = KERNEL
size = 0x17e000
offset = 0x38000
mask_flags = 0x1

mtd_part[1]:
name = MAC
size = 0x1000
offset = 0x1b6000
mask_flags = 0x1

mtd_part[2]:
name = ENV
size = 0x1000
offset = 0x1b7000
mask_flags = 0x1

mtd_part[3]:
name = A
size = 0x100000
offset = 0x1b8000
mask_flags = 0x1

mtd_part[4]:
name = B
size = 0xc0000
offset = 0x2b8000
mask_flags = 0x1

mtd_part[5]:
name = C
size = 0x480000
offset = 0x378000
mask_flags = 0x1

Creating 6 MTD partitions on "spi0.0":
0x000000038000-0x0000001b6000 : "KERNEL"
0x0000001b6000-0x0000001b7000 : "MAC"
0x0000001b7000-0x0000001b8000 : "ENV"
0x0000001b8000-0x0000002b8000 : "A"
0x0000002b8000-0x000000378000 : "B"
0x000000378000-0x0000007f8000 : "C"
Init AK SPI Flash finish.
akspi master initialize success, use for DMA mode.
AK39E_MAC Ethernet Driver, V1.1
netdev private = c2091ba0 
Allocataion gmacdev OK
Allocataion mac_info OK
Configed MAC RMII interface!
FHA:part: Sflash_Open file_num:6
FHA:open T:0, R:1, H:0, K:4, S:1794048, N:MAC 
FHA:open ex_bin F:21, L:0, B:-1, C:0
FHA:medium_flag:0, medium_type:0
CDH_Success:eth0: ak39E_mac at f0230000 IRQ 16 MAC: ae:0d:7d:84:d3:88
input: akgpio-keys as /devices/platform/akgpio-keys/input/input0
We're Using Internal RC OSC.
AK RTC, (c) 2010 ANYKA 
ak-rtc ak-rtc: rtc core: registered ak-rtc as rtc0
i2c /dev entries driver
AK MCI Driver (c) 2010 ANYKA
akmci_probe : MCI
## MMC Power: GPIO-1
power off
akmci ak_mci.0: Mci Interface driver.mmc0. using l2dma, sw IRQ. detect mode:GPIO detect.
TCP: cubic registered
NET: Registered protocol family 17
lib80211: common routines for IEEE802.11 drivers
ak-rtc ak-rtc: setting system clock to 1980-01-01 00:07:00 UTC (315533220)
VFS: Mounted root (squashfs filesystem) readonly on device 31:4.
devtmpfs: mounted
Freeing init memory: 104K
mount all file system...
starting mdev...
                     __                     
            _   ____ \/ ____  __            
     /\    | \ | |\ \  / /| |/ /    /\      
    /  \   |  \| | \ \/ / | ' /    /  \     
   / /\ \  | . ' |  \  /  |  <    / /\ \    
  / ____ \ | |\  |  |  |  | . \  / ____ \   
 /_/    \_\|_| \_|  |__|  |_|\_\/_/    \_\  
                                            
aksensor_module_init
f22_set_power_on
dd: can't open '/mnt/_ak39_factory.ini': No such file or directory

anyka login: No TF-Card for F/W Update.
The Version Path "/mnt" Is Not Exist *.bin.
      Current FileName: 

No F/W in TF-Card for Update.
No TF-Card for Tuya UUID Setup.
Try Wi-Fi Driver SSV6X5X.
SSV6XXX HCI TX Task started.
Fixed MAC 14:B2:E5:64:FC:DC
SSV WLAN driver SSV6006D: Set new macaddr
SSV WLAN driver SSV6006D: VIF 14:b2:e5:64:fc:dc of type 2 is added.
map log file ok
default log level=4

***************************************
******** cmd server has running! ******
***************************************
[main:200] Success to create TCP socket.
[main:234] Waiting for connect......
map log file ok
default log level=4
***************************************
*****A monitor daemon has running!*****
***************************************
[monitor_thread:395] thread id: 484
[monitor_thread:399] interval: 3(sec), fifo[/tmp/daemon_fifo].size=50
start ipc service......
start net service......
map log file ok
default log level=4

*******************************************************
         V2.0.17.408_SVN_build@Jun  3 2021_13:42:16
*******************************************************

[start_monitor_th:82] start monitor thread
[start_monitor_th:85] start monitor thread ok
[monitor:37] this thread id: 488
[ak_config_init_ini:1403] anyka config file check ok.


[init_video:338] match_sensor FIRST_PATH failed
[ak_vi_match_sensor:942] config_file: /usr/local/isp_f23_mipi_1lane.conf

[check_data:208] /usr/local/isp_f23_mipi_1lane.conf is not need file!
[check_data:210] sensor_id:0xf37, 0xf23, style_id:0, 0
[check_file:327] read sensor fail
[ak_vi_match_sensor:942] config_file: /usr/local/isp_f37_mipi_1lane.conf
[isp.conf]version: 4.003_MIPI0119, sensor id: 0xf37, style id: 0
isp subfile 0, modify time: 2021-4-23 10:47:06
01.15 �Ż�����ҹ�ӵ�ȱ��

isp subfile 1, modify time: 2020-3-7 18:04:47
9.5 reduce smear

[check_file:336] check isp cfg: /usr/local/isp_f37_mipi_1lane.conf OK
[match_sensor:313] ak_vi_match_sensor OK
[ak_vi_match_sensor:942] config_file: /etc/jffs2/isp_f37_mipi_1lane.conf
[isp_main_match_sensor_cfgfile:102] config file buf not emtpy, re init it
[isp.conf]version: 4.003_MIPI0119, sensor id: 0xf37, style id: 0
isp subfile 0, modify time: 2021-4-23 10:47:06
01.15 �Ż�����ҹ�ӵ�ȱ��

isp subfile 1, modify time: 2020-3-7 18:04:47
9.5 reduce smear

[check_file:336] check isp cfg: /etc/jffs2/isp_f37_mipi_1lane.conf OK
[ak_vi_open:983] register device, dev type: 0
new device
[vi_register_device:785] new dev=0x336bb8

----- libakuio.so V3.1.01 -----
[libakuio][/dev/ion] kernel config reserve mem size: 25165824, 0x1800000

[libakuio]ION: alloc 25165824 bytes for process 487
[libakuio]If22_set_power_on
ON: yield 6 for iad 0xb6c3fb78, len: 25165824

--------------- pmem info ---------------
    PMEM_GET_TOTAL_SIZE: 25165824 bytes
    PMEM_GET_PHYS: 0x80000000
    pmem.vaddr: 0xb5296000
mipi_ip_initiation ok, thssettle_base:0x9, support this mhz:720
--------------- info End -------mipi_ip_initiation ok, thssettle:0x9, find suitable dphy mhz:720
--------

####akuio pmem init 1lane thssettle:9
success###

ispsdk_lib versionreg0x40, read:0x89:V3.1.02 
--- AK_ISP_sdk_init g
reg0x60, read:0x89_fd=9 ---
 1 close fd:8
isp_>blc_mode=1hight light:
        frame_rate=20 max_exp_time=14Division by zero in kernel.
06 low_light_gain=12
low light:
        frame_rate=15 max_exp_time=1875 light_gain=4
hight light fps: 20
[isp_set_sensor_fps:2038] set sensor fps: 20
[set_fps:211] set fps:20 ok

[ak_cmd_register_module:741] no server was register, can not register module
register vi device ok, dev_count=1
[ak_vi_open:993] register device OK, pdev: 0x336bb8
[vi_new_user:624] now user_flg=0, user_ref=1
[00:00:00.000|  info|        ] Sensor Size 1920x1080.
[00:00:00.134|  warn|        ] "/home/hutong/work/platform_ptz/ipcam/ak_tuya_factory_porting.c:175" Condition ( "(akspc_has_file ("/tmp/" "_ak39_factorak_camera_set_parm pcid:1
y.ini")
[00:00:00.134|  iak_camera_set_parm pcid:1, ch2w:640, ch2h:360
nfo|  TUYA  ] Load Uuid from "/etc/jffs2/danale.conf".
[00:00:00.135|  info|  TUYA  ] Load Uuid from "/etc/jffs2/_ak39_tuya_uuid.ini".

 region = CN
   uuid = ybgd33147282678fa65f
    pid = iq3hpslazezny9k3
 auzkey = lwflswG3EzwJ46fOgQJiErM4I62JTw3P


[load_def_awb_step:231] get awb_attr ok, auto_awb_step:10
hight light:
        frame_rate=20 max_exp_time=1406 low_light_gain=12
low light:
        frame_rate=15 max_exp_time=1875 light_gain=4
hight light fps: 20
[isp_set_sensor_fps:2038] set sensor fps: 20
[set_fps:211] set fps:20 ok
init CROP succeedded! reset to CROP[1920, 1080]
[change_fps_pthread:748] thread id: 492
[vi_set_channel_attr:918] main change resolution to: w: 1920, h: 1080
[vi_set_channel_attr:920] sub change resolution to: w: 640, h: 360
[init_vi:266] capture fps: 25
[init_video:351] start capture ...
[malloc_capture_buffers:115] ion_mem: 0xb5709100, temp: 0x80473100
[malloc_capture_buffers:122] n_buffers: 0, start: 0xb5709100, length: 3461120
[malloc_capture_buffers:122] n_buffers: 1, start: 0xb5a56100, length: 3461120
[malloc_capture_buffers:122] n_buffers: 2, start: 0xb5da3100, length: 3461120
[malloc_capture_buffers:128] set buffer size: 3461120 ok
[isp_vi_capture_on:750] stream on, drop first 3 frames
[create_wait_queue:212] Waiting for connect......
[set_auto_day_night_param:66] (switch day_night) D_to_N=3584 ,N_to_D=1792,lock_time=1800000
[set_auto_day_night_param:69] 0--100000
[set_auto_day_night_param:69] 1--100000
[handle_thread:419] thread id: 493
[set_auto_day_night_param:69] 2--100000
[set_auto_day_night_param:69] 3--100000
[set_auto_day_night_param:69] 4--100000
[set_auto_day_night_param:72] 0--300000
[set_auto_day_night_param:72] 1--300000
[set_auto_day_night_param:72] 2--300000
[set_auto_day_night_param:72] 3--300000
[set_auto_day_night_param:72] 4--300000
[set_auto_day_night_param:72] 5--300000
[set_auto_day_night_param:72] 6--300000
[set_auto_day_night_param:72] 7--300000
[set_auto_day_night_param:72] 8--300000
[set_auto_day_night_param:72] 9--300000
[switch_day_or_night:73] (switch day_night)cur_status=1
[ak_misc_set_video_day_night:289] now set to day
[isp_switch:154] switching isp mode -> day
[isp.conf]version: 4.003_MIPI0119, sensor id: 0xf37, style id: 0
isp subfile 0, modify time: 2021-4-23 10:47:06
01.15 �Ż�����ҹ�ӵ�ȱ��

isp subfile 1, modify time: 2020-3-7 18:04:47
9.5 reduce smear

[check_file:336] check isp cfg: /etc/jffs2/isp_f37_mipi_1lane.conf OK
hight light:
        frame_rate=20 max_exp_time=1406 low_light_gain=12
low light:
        frame_rate=15 max_exp_time=1875 light_gain=4
hight light fps: 20
[isp_set_sensor_fps:2038] set sensor fps: 20
[set_fps:211] set fps:20 ok
hight light:
        frame_rate=20 max_exp_time=1406 low_light_gain=12
low light:
        frame_rate=15 max_exp_time=1875 light_gain=4
hight light fps: 20
[isp_set_sensor_fps:2038] set sensor fps: 20
[set_fps:211] set fps:20 ok
[load_def_awb_step:231] get awb_attr ok, auto_awb_step:10
[reload_config_awb_step:251] get awb_attr ok, cur auto_awb_step:10, set to step:10

[Gert46Jan]

Heb er een maar na update geen kleuren meer, alleen zwart/wit.
Kan ook nergens instelling daarvan vinden....raar...

Verder wel okay ding voor weinig.

[HdPNL]

Dit is de nieuwe versie van het model. Nu met 2.4 en 5 GHz Wifi, 2K resolutie (2304x1296), H.265 compressie (dus kleinere files) en een usb-c voedingspoort.

[silencedkill]

Bekijk deze eens: https://github.com/MuhammedKalkan/Anyka-Camera-Firmware
De chip lijkt overeen te komen, en de wifi module is quasi hetzelfde.

Onderaan de pagina staan er ook een aantal links.

Best benieuwd of je deze werkend kan krijgen!